Edinburgh · Scotland
Gutter, fascia & soffit sealing in Ingliston, Edinburgh
We cover Ingliston for sealing leaking gutter joints, end caps, fascias, soffits and roofline trims. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.
- Failed sealant on a garage door frame
- Gaps along fascia and soffit joints
- Damp patches inside below a leaking gutter
FAQs for Ingliston
I let a flat near Edinburgh Gateway station. Can you help?
Yes, we work for landlords and agents. Just send an email to info@mrmastic.co.uk and tell us about the property, and we will send you a clear quote.
Do you cover Ingliston for gutter sealing?
Yes. We work across all of Scotland, and Ingliston is part of that. You can send an email to info@mrmastic.co.uk and let us know what needs doing, and we will give you a clear price.
What does gutter sealing cost?
We don’t publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. You’ll get a clear quote before we start.
Should I try DIY first?
That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
Is it possible to stop a gutter joint dripping with sealant?
In most cases, yes. A sagging or cracked gutter needs more than sealant, and we will tell you.
Does someone need to be in?
If the work is inside, we need someone to let us in. Once we have agreed the job, you don’t need to watch us work.
Is there any odour?
That depends on the sealant. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Can you do several jobs on one visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
About our gutter sealing in Ingliston
Failed sealant round a garage door frame lets rain blow in. We cut out the old sealant and reseal the frame with an exterior sealant. We work on soffit joints, gutter end caps and garage door frames, and common reasons people get in touch are wet patches on the wall under a gutter joint and open joints in fascias and soffits.
Across smaller places in Scotland, stone and harled cottages, farm buildings and newer houses often stand exposed to wind and rain. Gutter joints and wall joints take a battering.
The work is covered for a year after we finish. If anything is not right with it, drop us a line at info@mrmastic.co.uk.
- Location
- Ingliston (EH28, EH12)
- Wider area
- Edinburgh
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What sealant work can’t fix
It helps to know what we cannot do:
- Fascias that need replacing
- Cracked, split or warped gutter sections
- Water backing up from a blocked pipe
If you’re not sure, just drop us a line at info@mrmastic.co.uk and we will give you a straight answer.
Joints and surfaces we work on
- Soffit joints
- uPVC fascias
- Gutter joints
- Gutter end caps
- Roofline trims
- Garage door frames
What affects the quote in Ingliston
Every job gets its own quote. This is what makes a difference:
- How many areas need sealing
- The old material and how stubborn it is
- How much there is to do
- Whether there’s mould to deal with
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Helping us quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- Any access issues, like height or stairs
- Photos by email, if that’s easy
- Whether it’s a home or a business
- The problem you’ve noticed
Every job is quoted individually, so the first step is telling us about yours. Just email us at info@mrmastic.co.uk with the details.
Surface by surface
uPVC fascias
We seal fascia joints, not replace the boards. Damaged boards need replacing by an installer.
Garage door frames
Frame-to-brick joints face the weather. We use a sealant made for outdoor joints.
Work for landlords, hotels and businesses
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Housing providers, facilities teams and property managers book us too in Ingliston and across Edinburgh. We can quote a run of properties together, and we’re fully insured.
What happens on the day
We work through the job in order: protect, prepare, seal, tidy. Typically it takes an hour or two for a few joints, longer for a full run and we leave things clean and tidy. In smaller Scottish places, parking is generally less of an issue than access and distance. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- We look at where the water is coming from and check the gutter isn’t broken or sagging.
- The joint or trim is cleaned out and old sealant removed.
- The area is dried so the sealant can bond.
- We seal the joint with a sealant made for gutters and outdoor use.
- The run is checked and any debris near the joints is cleared.
Before we arrive
- Tell us about any water getting in
- For indoor joints, keep the area dry beforehand if you can
- Mention any sign-in or site rules at work premises
Get a quote
If you are in Ingliston and need gutter sealing, drop us a line at info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Advice
Ingliston buildings and the weather
Harled (roughcast) walls are common in Scotland, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface. The Old and New Towns of Edinburgh are a UNESCO World Heritage Site, with sash windows throughout the Georgian New Town. For listed homes and conservation areas, check with the council before changing how windows or walls look.
For landlords with property near Edinburgh Gateway station, leaking gutter joints on a rental are best caught before they stain the walls. For site and facilities teams at buildings such as Craigmount High School, its movement joints, gutters and trims need looking after like any other building’s.
Ingliston is about 6 miles west of Edinburgh, in Edinburgh. Jobs in Ingliston get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. 175 places in Edinburgh are on our list, large and small. There’s also a page for Edinburgh, roughly 6 miles from Ingliston.
We cover every part of EH28 and EH12 for gutter sealing and the streets around it. We cover properties on Ingliston Road, Glasgow Road and Fairview Road and the roads around them. Nearby, we also carry out gutter sealing in Ratho Station (1 mile west), Ratho (1 mile south), Gogar (1 mile east), Lennie (2 miles north-east) and West Craigs (2 miles east). Further out, we also cover Edinburgh (6 miles east), Leith (8 miles east), Bonnington (8 miles east), Greenside (7 miles east), Broughton (7 miles east) and Bellevue (7 miles east).
Around Ingliston
Locally, jobs take us to homes and businesses close to The Turnhouse pub, among other places. For rail, the closest station is Edinburgh Gateway station, about 1.8 miles east of the centre. Nearby you’ll also find Linburn Centre (3.2 miles south-west) and ICE Scotland Museum (2.6 miles south-east). Not far away are Dundas Loch and Corstorphine Hill.
Also near Ingliston
What else we do in Ingliston
Why it’s worth doing now in Ingliston
If the problem is a blocked downpipe, sealing will not help. We look at what’s really happening and tell you if something else is needed. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part.
Why book with us
- More than 20 years in sealant work
- An ARBOMaster approved applicator
- We agree the colour with you first
- Every job guaranteed for a year
See our cost guide or customer reviews.
Should I try it myself first?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
A DIY attempt does not rule out a professional job. We cut it out and start again.