Shetland Islands · Scotland
Gutter Sealing in Brae
Problem with your gutter and fascia joints in Brae? We remove the old material, prepare the joints and seal them properly.
- Leaking gutter joints and stop ends
- Old gutter sealant that has let go
- Failed sealant on a garage door frame
Landlords, agents and businesses in Brae
Letting agents and landlords in Brae can book us as well as householders. Sealant work between tenants is a simple way to keep a property in good order.
For anyone letting property in or around Brae, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs, and photos by email help.
How we handle gutter sealing in Brae
Water dripping from a gutter joint can stain walls and soak the ground below. Resealing the joint is often all it needs if the gutter is not damaged. We work on soffit joints, gutter end caps and garage door frames, and the jobs we see most are water running down the wall below the gutter and earlier gutter repairs that have peeled off.
Outside joints can only be sealed when they’re dry, so work in Brae depends on the weather, and longer journeys are planned in advance. Tell us how to reach each wall, gutter and roofline.
A one-year guarantee comes as standard, so you are not left on your own once the job is done.
- Where
- Brae (ZE2)
- Wider area
- Shetland Islands
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
What else we do in Brae
Your questions about gutter sealing in Brae
Does living near the coast affect gutter sealing in Brae?
Coastal weather is harder on outside sealant: there’s more wind-driven rain and, closer to the shore, salt in the air. Choosing the right sealant for the frame and wall, laid at the right depth, helps it last.
Do you cover smaller places like Brae?
Yes, Brae is covered. We work across all of Scotland, islands included, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you work for landlords and businesses?
Yes, regularly. Several properties can go on one quote, and between tenancies is a good time for the work.
What about gutters on a second or third storey?
That depends on the building. Let us know the height and the ground below and we will confirm what’s needed.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Are you fully insured?
Yes, we’re fully insured.
Will sealant fix a dripping gutter joint?
Yes, as long as the gutter itself is in good order. We clean and dry the joint before sealing so the seal holds.
What does gutter sealing cost?
Every job is different, so each one gets its own quote. For a quick quote, drop us a line at info@mrmastic.co.uk with a short description of the job.
Signs you need gutter sealing in Brae
Sealant on fascias and trims weathers like any outdoor joint. It goes hard, cracks and pulls away after some years.
If you can see any of these, it’s time to have the joints looked at:
- Failed sealant on a garage door frame
- Water running down the wall below the gutter
- Damp on an inside wall under a dripping gutter
- Old gutter sealant that has let go
For jobs in and around Brae, choosing the right material for each joint is as important as a tidy finish.
Before you book anyone
- The length of the guarantee
- Whether they’re fully insured
- When the joint can take water or movement
- Whether the sealant suits the joint
Why act early in Brae
A bead squeezed onto a wet joint might hold for a while, but it soon lets go. Cleaning out and drying the joint first is what makes it last. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
What you pay reflects the work, not a rough estimate. That is why we ask a few questions first and give you a clear price before we start.
Why choose Mr Mastic in Brae
- Colour picked to suit the job
- We agree the colour with you first
- Sanitary silicone with an anti-fungal additive in wet areas
- White, clear, grey or another colour, product permitting
See what affects the cost and what customers say.
Should I try it myself first?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
The process
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The work itself takes a few hours, depending on the number of joints and the access. For a place like Brae, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First, we find the drip and check the gutter is not cracked or sagging.
- The joint or trim is cleaned out and old sealant removed.
- The area is dried so the sealant can bond.
- Gutter or exterior sealant is applied and finished.
- We check the run and clear any debris we find while we’re there.
Preparing for the visit
- Mention any tricky access
- Tell us if parking is tricky
- Keep pets and children clear of the area while we work
Getting a quote
Every job is quoted individually, so start by telling us what you need. Just email us at info@mrmastic.co.uk with the details and send photos if you have them.
Read more
Surface by surface
Gutter end caps
We seal end caps from the inside where we can reach once clean and dry.
Roofline trims
Sealing roofline trims is joint work only. A roofer deals with the roof itself.
Brae buildings and the weather
Brae is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That’s hard on gutter, fascia and roofline joints, especially on the side facing the sea. Island weather, with its wind and salt spray, is tough on gutter, fascia and roofline joints.
In and around Brae, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint.
Brae is in the Shetland Islands. Whether you are in the middle of Brae or further out, we cover gutter sealing for every kind of property, from flats and houses to offices and hotels. Across the Shetland Islands, we cover 63 places, and Brae is one of them.
Postcode districts we cover here for gutter sealing: ZE2. That includes homes and businesses on Runafirth, Ladieside and Hevdaland and the roads around them. If you are just outside Brae, we cover Sullom (3 miles north), Scatsta (3 miles north-east), Voe (4 miles south-east), Firth (6 miles north-east) and Hogaland (7 miles north). Brae is among the bigger towns we cover in the Shetland Islands. Island and remote addresses take a little more planning, so please mention your location when you email us at info@mrmastic.co.uk.
Local landmarks in Brae
Green spaces nearby include Houlls Water.
Quotes for gutter sealing in Brae
You will get a clear quote before any work starts. It takes into account:
- Mould in or behind the old joints
- Whether the work is at height
- The type of sealant required
- Whether old sealant or filler has to be cut out
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What to tell us for a quote
Before you ask for a quote, have a think about:
- Photos by email, if that’s easy
- Where the property is
- What’s wrong with the joints now
- Whether it has been sealed before
For a quote, send an email to info@mrmastic.co.uk with the location and a short description of the problem. You will have a clear quote before any work starts.