Isle of Wight · England
Glazing & conservatory sealant in Noke Common, Isle of Wight
Problem with your glazing joints in Noke Common? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Failed joints on frameless glass
- Water escaping where a screen meets the wall
- Mouldy sealant around glass panels
DIY sealant or a professional job?
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
About our glazing silicone in Noke Common
Cracked, stained or lifting silicone on glass looks poor and can leak. It comes off cleanly, without marking the glass before the new bead goes in. We work on glass-to-glass joints, rooflights and glass-to-frame joints, and the jobs we see most are rooflight joints letting water in and cracked silicone between glass panels.
Outdoor sealant needs dry, clean surfaces, so work on frames around Noke Common is planned for dry weather. Tell us about access to every side of the house, including upper-floor windows.
The work is covered for a year after we finish. If anything is not right with it, ring 0345 464 0079 or drop us an email.
- Where
- Noke Common (PO30)
- Wider area
- Isle of Wight
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Landlords, agents and businesses in Noke Common
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
Frames and glazing around Noke Common
Noke Common is within about 3 miles of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on glazing joints and frame seals, which can dry out and crack sooner where a building faces the weather. With historic houses such as Carisbrooke Castle (about 2.3 miles south) nearby, there’s older building stock in the area around Noke Common as well as newer homes. In older buildings, older frames set in brick or stone need a sealant that suits them, and sometimes that is traditional sand mastic.
Schools such as Hunnyhill Primary School are buildings too, and its window and door frames need their mastic kept sound, just like a home’s. In the older streets around Church of St. John the Baptist, frames set in older brick or stone need a sealant that suits the wall as well as the frame.
Noke Common is about 2 miles north of Newport, in the Isle of Wight. Homes, rented property, offices and hotels in Noke Common can book us for glazing silicone. The work is guaranteed for a year. Noke Common is one of 125 towns and villages in the Isle of Wight we cover. You can also see our page for Portsmouth, about 12 miles away.
Jobs for glazing silicone in PO30 works the same way as everywhere else we cover. If you’re just outside Noke Common, we cover Parkhurst (1 mile south-east), Forest Side (1 mile south-west), Hunny Hill (1 mile south), Northwood (2 miles north) and Rew Street (2 miles north-west). We also work in nearby towns such as Ryde (6 miles east), Cowes (3 miles north), Sandown (8 miles south-east), Shanklin (8 miles south-east), Ventnor (10 miles south-east) and East Cowes (3 miles north-east). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Near you in Noke Common
Typical jobs here are in homes near The Stag pub, Medina College and Seaclose Park. A little further out are Carisbrooke Castle (2.3 miles south) and St Mary's Hospital (0.8 miles south-east). Not far away are Briddlesford Nature Reserve and Mill Hill.
How we quote for glazing silicone
Your quote is based on your job. We look at:
- When we can work, for business premises
- How easy the joints are to reach
- How many rooms, windows or areas are involved
- The old material and how stubborn it is
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- A few pictures by email, if you can
- The address or postcode of the job
- Whether it has been sealed before
- How many joints, rooms or windows are involved
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved.
What happens on the day
A visit follows a simple pattern: we check the joints, protect the area around them, do the work and tidy away. Most jobs take anything from an hour or two to most of a day, depending on the size of the job. Somewhere as small as Noke Common, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We trace the leak and confirm it’s a sealant joint.
- We remove the old sealant carefully.
- We clean the glass and frame so the new silicone bonds.
- A neutral-cure glazing silicone is applied and tooled.
- Each joint is checked and, where possible, water-tested.
How to prepare
- Mention if the joints have been sealed before
- Tell us about any water getting in
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we’ll take it from there.
Related advice
Noke Common questions
Do you cover Noke Common for glazing silicone?
Yes. Our work covers London and the South East, and Noke Common is part of that. Just ring 0345 464 0079 or drop us an email with a few details of the job.
Does the coastal weather in Noke Common affect outside sealant?
Near the sea, outside joints face more wind, rain and salt than they would inland, so preparation and the right sealant matter all the more. Walls facing the sea are usually the first to need attention.
Is it worth trying it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
Can you reseal a frameless shower screen?
Yes, it’s a common job. We use anti-fungal silicone made for wet areas.
Can you work on commercial sites?
Yes. We’ve worked for hotels, offices and other businesses, and we’re fully insured.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Can I add another job to the visit?
Yes, we can. More than one area can go on one quote.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties at once, and between tenancies is a good time for the work.
Leave it or put it right?
Topping up old silicone can look like a fix, but silicone does not stick to silicone, and the leak usually returns. A proper reseal is the lasting answer. Where a wall is exposed, as many are in small places like Noke Common, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.
Why us?
- Fully insured
- Neat joints and a tidy finish
- Trusted Arbo and Everbuild sealants
- Experience in homes, commercial sites and hotels
Towns and villages near Noke Common
Also in Noke Common
Different surfaces, different methods
Shower screens
Mouldy or lifting sealant on a screen leaks. A full reseal sorts it.
Glass-to-frame joints
We cut the old silicone from the glass without scratching it and reseal with glazing silicone.
Looking after it afterwards
How long the joints last depends on use and care. We suggest:
- Squeegee the shower screen after each use
- Don’t use a blade near the sealant
- Check the gutters above the glazing for debris
- Act on drips or damp patches early
Keep conservatory gutters clear so water doesn’t back up against the seals. Blocked gutters can push water where it shouldn’t go.
Cracked glazing silicone means the joint has failed. Resealing now is a small job compared with fixing water damage later.