Isle of Wight · England

Noke Common Sand Mastic

Problem with your window and door surrounds in Noke Common? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.

  • Mastic round period door frames that has failed
  • Modern sealant on a period surround
  • Draughty sash windows at the surround

Book sand mastic in Noke Common

Different surfaces, different methods

Tenement and terrace windows

Rows of sash windows on tenements and terraces often need renewing together. We can do one window or several.

Timber door frames

A neat sand mastic joint round a front door suits a period home.

Sand mastic for homes and businesses in Noke Common

Across Noke Common, we renew sand mastic around sash and case windows. Each joint is raked out, prepared and pointed by hand, finished to suit the masonry. Typical jobs include gaps where the frame meets the masonry and failed mastic on an exposed elevation, on stone surrounds, brick reveals and period & listed homes.

Homes in small places like Noke Common often stand in the open, with little to shelter their windows from wind and rain. Exposed frames and sills lose their mastic sooner than sheltered ones.

Each job carries a 12-month guarantee.

Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter
Place
Noke Common (PO30)
Region
Isle of Wight
Cover
12 months on all our work
Quotes
Quoted before any work starts
Telephone
0345 464 0079
Updated
26 October 2026

What happens if it’s left?

Filling over old, loose mastic doesn’t last. We remove the loose material first so the new work lasts. Around Noke Common, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.

The cost depends on the size of the job, how much old material has to come out and access to the work. We give a clear quote before we start, so you know where you stand.

Why Noke Common clients choose us

  • Tidy, careful work
  • More than 20 years in sealant work
  • Homes, businesses and hotels
  • Rated 4.9 stars on Google

Read what affects the cost or our reviews.

When something else is needed

Some problems need a builder, plumber or other trade rather than us:

  • Sashes that rattle, stick or won’t open
  • Planning or listed building consent (your local planning authority decides)
  • Crumbling stone or brickwork round the window

If you’re not sure, just phone 0345 464 0079 or drop us an email and we’ll give you a straight answer before booking.

Where we work in Noke Common

  • Period & listed homes
  • Tenement windows
  • Timber door frames
  • Stone surrounds
  • Brick reveals
  • Sash and case windows

How the visit works

When we arrive, we look over the joints with you first, so there are no surprises. We protect the surfaces around the joints before any work starts. Most jobs take a few hours per window, depending on the condition of the joints. For a village or hamlet like Noke Common, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.

  1. Each surround is checked first.
  2. The joint is raked out and cleaned.
  3. Large voids are packed out.
  4. New sand mastic is applied and shaped by hand.
  5. We finish the mastic to a tidy line.

Before we arrive

  • Try not to wet indoor joints just before the visit
  • Mention any sign-in or site rules at work premises
  • Let us know about stairs, lifts or work at height

How to get a quote

A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.

Get a quick quote

Advice

Noke Common questions

Is Noke Common within the area you cover?

Yes, we do. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.

Is Noke Common in your area for sand mastic?

Yes, Noke Common is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or drop us an email and tell us what needs doing.

Can I add another job to the visit?

Yes, and it often makes sense. Doing several areas at once is generally more efficient, so mention them when you ask for a quote.

Are you an approved applicator?

Yes. We’re an ARBOMaster approved applicator.

Can I paint the new mastic?

It’s traditionally left unpainted, which is what traditional guidance recommends. Ask us before decorating.

When will the new mastic be hard?

A skin forms quite soon, but full hardening takes longer. We will tell you what to expect for your job.

Is consent needed for window work on a listed home?

Check with your local planning authority. They’ll tell you if consent is needed.

How do I get a quote for sand mastic in Noke Common?

We don’t publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.

Landlord and commercial work in Noke Common

We work for landlords and letting agents as well as householders. Sealant work between tenants is a simple way to keep a property in good order.

We regularly work with letting and managing agents. Tell us the address, the job and how access works.

What sand mastic looks like in Noke Common

Noke Common is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That’s hard on the mastic around older windows and doors, especially on the side facing the sea. With historic houses such as Carisbrooke Castle (about 2.3 miles south) nearby, there’s older building stock in the area around Noke Common as well as newer homes. Where a home is older, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic.

In the older streets around Church of St. John the Baptist, the joint between an old wall and a newer frame is usually the first place rain gets in.

Noke Common is about 2 miles north of Newport, in the Isle of Wight. From the centre of Noke Common to the outskirts, we cover sand mastic for every kind of property. 125 places in the Isle of Wight are on our list. Portsmouth is on our list too, about 12 miles from Noke Common.

We cover every part of the PO30 postcode area for sand mastic and the streets around it. Other places close to Noke Common include Parkhurst (1 mile south-east), Forest Side (1 mile south-west), Hunny Hill (1 mile south), Northwood (2 miles north) and Rew Street (2 miles north-west). Further out, we also cover Ryde (6 miles east), Cowes (3 miles north), Sandown (8 miles south-east), Shanklin (8 miles south-east), Ventnor (10 miles south-east) and East Cowes (3 miles north-east). Island and remote addresses take a little more planning, so please mention your location when you phone 0345 464 0079 or email us.

What’s near Noke Common

Around Noke Common, our work takes us to homes and buildings near The Stag pub, Medina College and Seaclose Park. Other landmarks nearby include Carisbrooke Castle (2.3 miles south) and St Mary's Hospital (0.8 miles south-east). Green spaces nearby include Briddlesford Nature Reserve and Mill Hill.

Map of Noke Common © OpenStreetMap contributors

Signs you need sand mastic in Noke Common

Sand mastic slowly weathers. It hardens, cracks and starts to come away on the stone or timber.

These are the problems we are asked about most:

  • Gaps round a timber door in stone or brick
  • Silicone on a period window that looks wrong
  • Window mastic to renew ahead of painting
  • Draughts and rain around sash boxes

If you look after a building such as Hunnyhill Primary School, its window and door frames need their mastic kept sound, just like a home’s.

What to look for in a quote

  • How the colour is chosen
  • Whether the sealant suits the joint
  • How the joint is cleaned and prepared
  • Whether all the old sealant comes out first

How to choose a mastic man

Can I do it myself?

Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.

If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job