Isle of Wight · England

Glazing Silicone in Forest Side

Specialist glazing silicone for Forest Side: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.

  • Stained, discoloured glazing silicone
  • New silicone smeared over old sealant
  • Water running down inside the glass

Book glazing silicone in Forest Side

Glazing silicone in Forest Side, done properly

We renew glazing silicone on conservatories, rooflights and glass panels plus shower screens and the bases of glass balustrades. The old sealant comes out, the joint is cleaned and new silicone goes in. If you have water getting into a conservatory at the joints and black or yellowed silicone on glass joints, we can help, on rooflights, glass balustrade bases and conservatory frames alike.

Outdoor sealant needs dry, clean surfaces, so work on frames around Forest Side is planned for dry weather. Tell us about access to every side of the house, including upper-floor windows.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house
Place
Forest Side (PO30)
Wider area
Isle of Wight
Guarantee
A year, on every job
Price
Quoted before any work starts
Phone
0345 464 0079
Last updated
26 October 2026

What glazing silicone looks like in Forest Side

With historic houses such as Carisbrooke Castle (about 1.3 miles south) nearby, there’s older building stock in the area around Forest Side as well as newer homes. In older buildings, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic. The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.

In the older streets around St. Mary's Church, frames set in older brick or stone need a sealant that suits the wall as well as the frame. If you look after a building such as Carisbrooke College, its window and door frames need their mastic kept sound, just like a home’s.

Forest Side is about 1 mile north-west of Newport, in the Isle of Wight. Forest Side gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Our area takes in 125 places across the Isle of Wight. We also work in Portsmouth, around 13 miles away.

Jobs for glazing silicone in PO30 works the same way as everywhere else we cover. Local streets include Forest Road and Gunville Road. Other places close to Forest Side include Hunny Hill (1 mile east), Parkhurst (1 mile north-east), Noke Common (1 mile north-east), Porchfield (2 miles north-west) and Locksgreen (2 miles west). Larger places within reach include Ryde (7 miles east), Cowes (4 miles north), Sandown (8 miles south-east), Shanklin (8 miles south-east), Ventnor (9 miles south-east) and East Cowes (4 miles north-east). If you are somewhere remote, the job takes a little more planning, so mention it when you ask for a quote.

Landmarks near Forest Side

We work in homes and buildings around Hunnyhill Primary School, Seaclose Park and Island Innovation VI Form Campus. Other landmarks nearby include Carisbrooke Castle (1.3 miles south) and St Mary's Hospital (1 mile east). Not far away are Mill Hill and Briddlesford Nature Reserve.

Map of Forest Side © OpenStreetMap contributors

For landlords and businesses

We work for landlords and agents as well as householders. Sealant work between tenants keeps a property looking cared for.

In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.

What we cannot put right

We’d rather tell you now than do work that will not last, so here’s what sealant cannot put right:

  • A sagging or failing conservatory roof
  • Misting between the panes of a double-glazed unit (a failed unit for a glazier)
  • Glass that needs replacing

If you are not sure, just call 0345 464 0079 or send us an email and we’ll give you a straight answer before you book.

Where we work in Forest Side

  • Rooflights
  • Glass balustrade bases
  • Glass-to-frame joints
  • Conservatory frames
  • Glass-to-glass joints
  • Shower screens

How the visit works

There’s no need to move everything out, only the area right around the joints. Everything nearby is protected, and the job takes a few hours for most jobs for a typical job. Somewhere as small as Forest Side, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. First we agree the joints to be done.
  2. We cut away the failed silicone.
  3. We clean and prepare the joint.
  4. We apply and tool the new silicone.
  5. The joints are checked before we leave.

Preparing for the visit

  • Mention any tricky access
  • Clear the area around the work
  • Where the joints are inside, avoid wetting them before we arrive

How to get a quote

For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work before giving you a price.

Ask for a quote

Read more

Different surfaces, different methods

Glass-to-frame joints

The sealant must stick to glass and frame alike. We use a glazing silicone suited to each.

Rooflights

Water around a rooflight is not always the sealant. We check which it is.

Questions from Forest Side

Is Forest Side within the area you cover?

Yes. Forest Side is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

Is there a guarantee on glazing silicone in Forest Side?

All our work, in Forest Side and everywhere else, comes with a 12-month guarantee. We’re fully insured, and an ARBOMaster approved applicator.

Is it messy?

We keep the work tidy. Nearby surfaces are protected, and we clear up when we’re done.

How long before the joint can be used?

Different products cure at different speeds, so please follow the time we give you.

Do you offer different sealant colours?

Usually, yes. White, clear and grey are common, and other colours are available, and we will agree it with you first.

Do you have insurance?

Yes, we are fully insured.

What information do you need?

Where the job is, what the problem is and roughly how big it is. Photos by email help too.

Can you just put new silicone over the old?

Topping up is a common cause of leaks. A proper job means cutting out, cleaning and resealing.

Quotes for glazing silicone in Forest Side

The price is agreed before any work begins. It takes into account:

  • Whether the work is at height
  • Any working-time requirements on site
  • Which sealant suits the joint
  • The number of rooms or windows

Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.

Asking for a quote

A few details help us give you an accurate quote. When you get in contact, it helps to mention:

  • The address or postcode of the job
  • Pictures of the joints, sent by email
  • The rough size of the job
  • What the problem is, such as mould, gaps, leaks or cracking

If you’re in Forest Side and need glazing silicone, call 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.

DIY sealant or a professional job?

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.

A DIY attempt does not rule out a professional job. We cut it out and start again, so just mention it when you contact us.

How to look after the new joints

How long the joints last depends on use and care. Here’s what we suggest:

  • Inspect the sealant on glazing annually
  • Squeegee the shower screen after each use
  • Use gentle products around the joints
  • Keep scrapers and blades away from the silicone

Squeegee a shower screen after each shower and keep the room ventilated. It helps stop mould getting into the silicone.

Drips or damp near a glazing joint shouldn’t be ignored. The cause may be sealant or another part, and we’ll tell you which.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job