Surrey · England
Glazing & conservatory sealant in Hurtmore, Surrey
We cover Hurtmore for glazing silicone for conservatories, rooflights, glass panels and shower screens. Old sealant removed completely, joints prepared properly and a one-year guarantee.
- Mouldy sealant around glass panels
- Failed sealant around rooflight glass
- Silicone pulling away from the glass
Hurtmore homes and the weather
With historic houses such as Loseley Park (about 1.5 miles north-east) nearby, there’s older building stock in the area around Hurtmore as well as newer homes. In older buildings, older timber frames in brick or stone need a different approach from a modern uPVC window. Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
Rented homes near Godalming station change hands often, and a shower screen or conservatory joint that leaks is easier to reseal while the property is empty. If you look after a building such as Charterhouse School, the mastic around its windows and doors needs looking after like any other building’s.
Hurtmore is about 4 miles south-west of Guildford, in Surrey. We provide glazing silicone to homes and businesses in Hurtmore, as part of our work across Surrey. We cover 395 towns and villages across Surrey, from the larger towns to small villages. You can also see our page for Crawley, about 20 miles away.
Postcode districts we cover here for glazing silicone: GU7. If you need glazing silicone at a property on Hurtmore Road, Hurtmore Chase and Northway or anywhere close by, we can help. Nearby, we also carry out glazing silicone in Compton (1 mile north), Binscombe (1 mile east), Shackleford (1 mile west), Littleton (2 miles north-east) and Puttenham (2 miles north-west). Within a short drive, we also cover Guildford (4 miles north-east), Woking (8 miles north), Camberley (10 miles north-west), Farnham (7 miles west), Dorking (13 miles east) and Frimley (9 miles north-west).
Local landmarks in Hurtmore
We work in homes and buildings around Middlebriars Wood, Broadwater School and Loseley Fields Primary School and the streets around them. The nearest railway station is Godalming station, roughly 1.2 miles south-east. Nearby you will also find Charterhouse School Museum (0.6 miles south-east) and Milford Hospital (2.4 miles south). Green spaces nearby include Frith Hill and Farncombe Wood.
How we handle glazing silicone in Hurtmore
Many conservatory leaks come down to failed sealant, where glass meets frame or frame meets wall. We find the joint that is letting water in and renew it, and if it’s something sealant can’t fix, we’ll tell you. If you’re dealing with leaks from the base of a shower screen and sealant that was laid over old silicone and failed, we can put it right, whatever the surface.
Homes in small places like Hurtmore often stand in the open, with little to shelter their windows from wind and rain. That exposure dries out and cracks the mastic around frames and sills faster.
All our work is covered by our one-year guarantee.
- Location
- Hurtmore (GU7)
- Region
- Surrey
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Signs you need glazing silicone in Hurtmore
Shower screen silicone gets wet every day. Mould gets into it and the edges begin to peel.
Look out for these signs:
- A quick top-up bead that didn’t last
- Glass-to-glass joints that have split
- Mouldy sealant around glass panels
- Water tracking down the inner face of the glass
If you live in an older home near Church of St Nicholas, the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.
What your quote should include
- How long the guarantee is
- What preparation is included
- How much experience the applicator has
- How long to leave it before use
Your questions about glazing silicone in Hurtmore
Will you come out to Hurtmore?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you cover Hurtmore for glazing silicone?
Yes. Our work covers London and the South East, and Hurtmore is part of that. You can phone 0345 464 0079 or send us an email and tell us what needs doing.
What do you put in the joint?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Do you hold any approvals?
Yes. We are an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
Are you fully insured?
Yes. We are fully insured, and we have been doing sealant work for more than 20 years.
Do the sealants smell?
Sometimes, a little. It fades as the sealant cures.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Should I try DIY first?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
When something else is needed
A few problems are outside what sealant work can do:
- A roof that has moved or dropped
- Glass that needs replacing
- A sealed unit that has misted inside
If you are not sure, just ring 0345 464 0079 or email us and we will give you a straight answer.
What we seal
- Glass-to-glass joints
- Rooflights
- Conservatory frames
- Glass-to-frame joints
- Shower screens
- Glass balustrade bases
Different surfaces, different methods
Glass-to-glass joints
Where two panes meet, the silicone joint takes all the movement. It must be clean, neat and well bonded.
Conservatory frames
Conservatory frame joints are a common source of leaks. We cut out the old sealant and reseal.
What we do, step by step
You do not need to clear the whole room or building, just the space around the work. We protect the rest, and the work takes a few hours for most jobs for a typical job. For a village or hamlet like Hurtmore, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We look at the glazing and agree which joints need resealing.
- We cut away the failed silicone.
- The surfaces are cleaned with a suitable solvent.
- We apply and tool the new silicone.
- The joints are checked before we leave.
Getting ready for the visit
- Let us know if you’ve seen damp or leaks
- Clear the area around the work
- On commercial sites, let us know about site rules
Ask for a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. When it suits you, call 0345 464 0079 or send us an email.
Advice
Why deal with it now?
Fixing a leaking screen early protects what’s underneath. Water from a failed joint can soak into the floor before you notice. Older cottages and farmhouses around Hurtmore can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Why book with us
- Fully insured
- 12-month guarantee on every job
- White, clear, grey or another colour, product permitting
- A sealant colour to suit the surroundings
Take a look at how sealant jobs are priced and what customers say.
What affects the cost of glazing silicone
Some jobs are bigger than they look, and some smaller. What affects the quote:
- The product the joint needs
- Any mould that needs treating
- Working hours on commercial sites
- How easy the joints are to reach
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference.
Helping us quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Whether it has been sealed before
- What the problem is, such as mould, gaps, leaks or cracking
- Where the job is, and your postcode
- Access, such as stairs, a lift or height
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we’ll explain what’s involved before giving you a price.
Keeping the joints in good condition
So the new joints stay in good condition:
- Avoid scraping close to the bead
- Keep harsh solvents off the silicone
- Wipe the screen down after showering
- Check the silicone on glass every year or so
Clear the conservatory gutters regularly so water doesn’t back up against the seals. Overflowing gutters can cause leaks of their own.
Drips or damp near a glazing joint shouldn’t be ignored. The cause may be sealant or another part, and we will tell you which.