Surrey · England
Glazing & conservatory sealant in Compton, Surrey
Specialist glazing silicone for Compton: careful preparation, the right product and tidy work. Call for a quick quote.
- Split or lifting silicone on glass
- Glass-to-glass joints that have split
- Stained, discoloured glazing silicone
What affects the cost of glazing silicone
We quote each job individually. This is what makes a difference:
- Mould in or behind the old joints
- The amount of work
- The old material and how stubborn it is
- When we can work, for business premises
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- If it’s domestic, commercial or a hotel
- Whether it has been sealed before
- The rough size of the job
- What the problem is, such as mould, gaps, leaks or cracking
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved and give you a clear price.
Glazing silicone in Compton, done properly
Glass and frames expand and contract differently, and the silicone between them takes the strain. When it cracks or lets go, water gets in. We cut it out and reseal with a glazing silicone suited to the joint. If you have shower screens leaking along the wall or tray and split or lifting silicone on glass, we can put it right.
Outdoor sealant needs dry, clean surfaces, so work on frames around Compton is planned for dry weather. Tell us about access to every side of the house, including upper-floor windows.
A one-year guarantee comes as standard, so you’re covered after we have gone.
- Location
- Compton (GU3)
- Region
- Surrey
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
For landlords and businesses
If you manage several properties in or around Compton, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can be quoted together.
When something else is needed
A few problems are outside what sealant work can do:
- Cracked or broken glass
- A sagging or failing conservatory roof
- Leaks from the roof covering or flashing (a roofer’s job)
If you’re not sure, just ring 0345 464 0079 or send us an email and we will give you a straight answer.
Surfaces we seal
- Glass-to-glass joints
- Conservatory frames
- Glass-to-frame joints
- Rooflights
- Shower screens
- Glass balustrade bases
Towns and villages near Compton
Also in Compton
The process
All our tools and materials come with us in the van. After a quick look at the joints together, the area is protected and the work begins. Most jobs take a few hours, depending on how many joints need doing. For a village or hamlet like Compton, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by finding the leak and making sure sealant is the cause.
- Old silicone is cut away from the glass and frame without scratching either.
- The glass and frame are cleaned and degreased.
- New glazing silicone goes in and is tooled to a neat finish.
- We check the joints and, where safe, run water over them.
How to prepare
- Plan for the work area to be out of bounds to pets and children
- Clear items away from the joints we’re working on
- Mention if the joints have been sealed before
Get a quote
Every job is quoted individually, so the first step is telling us about yours. Simply ring 0345 464 0079 or email us and describe the job.
Related advice
Compton homes and the weather
Historic houses like Loseley Park (about 1 mile east) are a reminder that the area around Compton has older buildings as well as new. Where a home is older, older frames set in brick or stone need a sealant that suits them, and sometimes that is traditional sand mastic. The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Letting a property close to Farncombe station? Then glazing joints are worth checking at the end of a tenancy, before a small leak grows. For an older house near a landmark such as Church of St Nicholas, the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.
Compton is about 3 miles south-west of Guildford, in Surrey. Wherever you are in the GU3 postcode area, we can carry out glazing silicone at your property. We cover 395 towns and villages across Surrey, large and small. You can also see our page for Crawley, about 20 miles away.
Work in GU3 is quoted and booked the same way as anywhere else. If you need glazing silicone at a property on The Street, Spiceall and Almsgate or anywhere close by, we can help. Nearby, we also carry out glazing silicone in Hurtmore (1 mile south), Binscombe (1 mile south-east), Littleton (1 mile east), Shackleford (2 miles south-west) and Onslow Village (2 miles north-east). Larger places within reach include Guildford (3 miles north-east), Woking (7 miles north), Camberley (9 miles north-west), Farnham (7 miles west), Egham (15 miles north) and Walton-on-Thames (15 miles north-east).
What’s near Compton
We work in homes and buildings around Broadwater School, Pucks Oak Barn and McAlmont Reserves and The Harrow pub. For rail, the closest station is Farncombe station, about 1.6 miles south-east of the centre. Well-known places in the area include Charterhouse School Museum (1.2 miles south) and Guildford Castle (2.8 miles north-east). Not far away are Farncombe Wood and Frith Hill.
Signs you need glazing silicone in Compton
New silicone over old silicone won’t bond. Many failed joints we see have been topped up rather than cut out leaving a path for water.
Common reasons people contact us are:
- New silicone smeared over old sealant
- Failed joints on frameless glass
- Leaks from the base of a shower screen
- Mouldy sealant around glass panels
Schools such as Loseley Fields Primary School are buildings too, and the mastic around its windows and doors needs looking after like any other building’s.
What to look for in a quote
- What preparation is included
- Whether they seal over old material or remove it
- What happens if the job turns out different
- How long the guarantee is
Different surfaces, different methods
Glass balustrade bases
Outdoor balustrade joints face the weather. A sound sealant joint keeps them tidy and dry.
Glass-to-glass joints
These joints are on show, so a straight, even finish matters.
Can I do it myself?
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
Questions from Compton
Do you work for landlords with property near Farncombe station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just call 0345 464 0079 or email us with the address and what needs doing, and we’ll give you a clear price.
Do you cover smaller places like Compton?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Can you reseal the base of a glass balustrade?
Yes. We cut out the failed sealant and reseal the base joint using a sealant that suits the materials.
Do you reseal glass shower screens?
We can. The old bead comes off without marking the glass before cleaning and resealing.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Can you replace a misted double-glazed unit?
Glass replacement isn’t our trade. We look after the sealant joints and can tell you if a unit seems to have gone.
What do you put in the joint?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we will explain our choice.
Can I choose the sealant colour?
We will suggest a colour to suit the surroundings, from white and clear to greys and other shades. The product needed can limit the range.