Hampshire · England
Crow Glazing Silicone
Glazing silicone for Crow and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Leaking glazing joints on a rooflight
- Shower screens leaking along the wall or tray
- Glazing silicone that has cracked or come away
When it is not the sealant
We will not take on work that won’t last, so these are the limits:
- Cracked or broken glass
- A frame that needs repairing or replacing
- Misting between the panes of a double-glazed unit (a failed unit for a glazier)
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think.
Surfaces we seal
- Glass balustrade bases
- Conservatory frames
- Rooflights
- Glass-to-glass joints
- Glass-to-frame joints
- Shower screens
Glazing silicone for homes and businesses in Crow
We renew glazing silicone on conservatories, rooflights and glass panels, as well as frameless shower screens and glass balustrade bases. The old sealant comes out, the joint is cleaned and new silicone goes in. We work on rooflights, glass-to-frame joints and glass balustrade bases, and people most often call us about stained, discoloured glazing silicone and conservatory leaks at frame and glazing joints.
Outdoor sealant needs dry, clean surfaces, so work on frames around Crow is planned for dry weather. Let us know about access to all the frames, upstairs ones included.
Your job is guaranteed for a year, as with all our work.
- Place
- Crow (BH24)
- Region
- Hampshire
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
What happens if it’s left?
Glazing joints need a sealant made for the job. General-purpose sealant from a DIY shop may not suit glass or the frame, so we use neutral-cure glazing silicone. Older cottages and farmhouses around Crow can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
We do not show prices on the website, because the cost depends so much on the job itself. For a quick quote, please call 0345 464 0079 or drop us an email and we’ll talk you through it.
Why Crow customers choose us
- Tidy, careful work
- An ARBOMaster approved applicator
- You choose the colour before work begins
- Experience in homes, commercial sites and hotels
Surface by surface
Rooflights
Rooflights get the full force of the weather. Its sealant ages faster than vertical joints.
Glass balustrade bases
We reseal the joint where the glass meets the base channel. Glass fitting is a separate trade.
How the visit works
We work through the job in order: protect, prepare, seal, tidy. Typically it takes a few hours for most jobs and we leave things clean and tidy. For a village or hamlet like Crow, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First, we check where the water gets in.
- The failed silicone is cut out without marking the glass or frame.
- We clean the glass and frame so the new silicone bonds.
- We lay the new bead and tool it smooth.
- We check the finished joints and test with water where it’s safe.
Before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- For indoor joints, keep the area dry beforehand if you can
- Let us know if you’ve seen damp or leaks
Getting a quote
Every job is quoted individually, so start by telling us what you need. Just phone 0345 464 0079 or email us with the details, and pictures are welcome.
Related advice
Glazing silicone in Crow: local notes
Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast. Historic houses like Avon Tyrrell House (about 2.4 miles south-east) are a reminder that the area around Crow has older buildings as well as new. In older buildings, older frames set in brick or stone need a sealant that suits them, and sometimes that is traditional sand mastic.
Avon Tyrrell House, about 2.4 miles south-east, is one of the historic houses in the wider area around Crow, and older homes nearby need a sealant that suits their walls. For site and facilities teams at buildings such as Ringwood Junior School, larger buildings have plenty of frames, and the mastic around each one ages.
Crow is in Hampshire. Every kind of property in Crow is covered for glazing silicone, old or new, large or small. Every job comes with our one-year guarantee. Crow is one of 683 places in Hampshire where we work. There’s also a page for Southampton, roughly 17 miles from Crow.
Work in BH24 works the same way as everywhere else we cover. That includes homes and businesses on Barrack Lane, Wood End Road and Crow Lane and the roads around them. We also cover the places around Crow: Upper Kingston (1 mile west), Hightown (1 mile north), Bagnum (1 mile south), Ringwood (1 mile north-west) and Poulner (1 mile north). Within a short drive, we also cover Totton (13 miles north-east), Lymington (11 miles south-east), New Milton (7 miles south-east), Barton on Sea (8 miles south-east), Dibden Purlieu (15 miles east) and Marchwood (14 miles east).
Landmarks near Crow
Typical jobs here are in homes near Ringwood School and The Elm Tree Inn, among other places. Nearby you will also find St Leonard's Hospital (4.3 miles west). Green spaces nearby include Blashford Lakes and Linbrook Lake.
Crow: your questions answered
Is there a guarantee on glazing silicone in Crow?
Every job comes with our one-year guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Is Crow within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you reseal a frameless shower screen?
Yes. We cut out the old silicone and reseal the glass-to-wall and glass-to-tray joints.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Do I have to be there?
Access is agreed with you when the job is booked. Indoors, that generally means someone at home.
What information do you need?
A short description and the location. We’ll ask anything else we need to know.
Can you replace a misted double-glazed unit?
No, our work is the silicone. Glass and sealed units need a glazier.
How long will you be here?
Most jobs take anything from an hour or two to most of a day, depending on the size of the job. We will confirm how long when we quote.
Can I do it myself?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
For landlords and businesses
Mouldy or split sealant often shows up at the end of a tenancy. Several properties can be quoted together.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
What else we do in Crow
Quotes for glazing silicone in Crow
The quote reflects the job in front of us. We look at:
- Whether the work is at height
- The number of rooms or windows
- How much old sealant there is and how hard it is to remove
- The type of sealant required
A failed joint rarely gets cheaper to fix by waiting. If you’re unsure, phone 0345 464 0079 or email us for an honest opinion and a quote.
What to tell us for a quote
To make quoting easier, let us know:
- The rough size of the job
- The type of property
- Photos by email, if that’s easy
- Where the job is, and your postcode
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.