Hampshire · England
Fire Rated Sealant in Crow
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homeowners, landlords and businesses in Crow. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Open joints along the top of partitions
- Ordinary sealant used where a fire-rated product was needed
- Old fire sealant that has split or come away
Fire rated sealant in Crow: local notes
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Managing a site like Ringwood Junior School? Then gaps opened by contractors for new cabling are a common finding in schools and offices.
Crow is in Hampshire. Our applicators cover fire rated sealant for householders, landlords and businesses in Crow, as part of our work across Hampshire. Our Hampshire coverage runs to 683 places, Crow among them. Southampton is on our list too, about 17 miles from Crow.
Jobs for fire rated sealant in BH24 works the same way as everywhere else we cover. If you need fire rated sealant at a property on Barrack Lane, Wood End Road and Crow Lane or a nearby road, our applicators can take on the job. Nearby, we also carry out fire rated sealant in Upper Kingston (1 mile west), Hightown (1 mile north), Bagnum (1 mile south), Ringwood (1 mile north-west) and Poulner (1 mile north). Within a short drive, we also cover Totton (13 miles north-east), Lymington (11 miles south-east), New Milton (7 miles south-east), Barton on Sea (8 miles south-east), Dibden Purlieu (15 miles east) and Marchwood (14 miles east).
Around Crow
Typical jobs here are in homes near Ringwood School and The Elm Tree Inn, among other places. Other landmarks nearby include St Leonard's Hospital (4.3 miles west). Open spaces near Crow include Blashford Lakes and Linbrook Lake.
About our fire rated sealant in Crow
Landlords, managing agents and facilities teams use us for the sealant items on a fire risk assessment. Send us the list or the survey and we will quote for the fire-rated sealant work on it. We work on plasterboard & masonry, door frames and flats & HMOs, and the jobs we see most are damaged fire sealant left by other trades and old fire sealant that has split or come away.
If you have holiday lets, a converted barn used for business or a community building near Crow, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Where
- Crow (BH24)
- Wider area
- Hampshire
- Cover
- One year on every job
- Quotes
- A clear price before work begins
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
What affects the cost of fire rated sealant
There’s no set price list. The quote depends on:
- Access and height
- When we can work, for business premises
- Which sealant suits the joint
- Whether old sealant or filler has to be cut out
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all play a part.
What to tell us for a quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Any access issues, like height or stairs
- Roughly how big the job is
- Photos by email, if that’s easy
- If someone has resealed it before
To get a quote, phone 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We’ll send you a clear quote before any work starts.
When something else is needed
Sealant isn’t the answer to every problem, and we’d rather say so up front. Sealant won’t put right:
- Construction that does not provide fire resistance on its own
- Large holes that need a different fire-stopping system
- Problems with the door itself rather than the gap around the frame
If in doubt, call 0345 464 0079 or email us and we will say what we think before you book.
Where we work in Crow
- Door frames
- Pipe & cable gaps
- Plasterboard & masonry
- Service penetrations
- Linear gaps
- Flats & HMOs
Work for landlords, hotels and businesses
Landlords and letting agents in Crow can book us as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order before the next move-in.
Failed sealant is one of the commonest items on a check-out report. Several properties can be quoted together.
What else we do in Crow
When to call us in Crow
If the sealant is too shallow, has the wrong backing or sits on a dusty surface, it isn’t installed as tested. Rushed fire stopping is common, especially where it was squeezed in at the end of a project.
Any of these means the joints need attention:
- Linear gaps at the head of walls
- Seals cut through by electricians, plumbers or data installers
- Gaps around pipes and cables through fire-resisting walls
- New service routes left unsealed after building work
Around Crow, as everywhere, fire rated sealant is only as good as the preparation behind it.
What to look for in a quote
- Who does the work, and how experienced they are
- Which colour the sealant will be
- When the joint can take water or movement
- What happens if the job turns out different
How to look after the new joints
Looking after new joints is easy, and it makes a real difference:
- Include hidden areas like risers in routine checks
- Check whether a sealant can be painted before decorating over it
- Keep the record of products and locations with your fire safety documents
- Report cracked or damaged seals as soon as you notice them
Keep the record we give you with the building’s fire safety documents. It helps whoever checks the building next.
Open gaps do not only matter in a fire: noise, draughts and even pests can come through too. Sealing them early helps on every front.
How it works
At the end, we look at the finished work together and tell you how long to leave it. The work normally takes a few hours for a handful of gaps, and longer for a whole building, depending on the size of the job. Somewhere like Crow needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Where the tested detail needs backing or fill, we fit it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Locations and products are noted so you have them on file.
How to prepare
- Try not to wet indoor joints just before the visit
- Let us know if you’ve seen damp or leaks
- For business premises, tell us about site rules or sign-in
Get a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. Whenever you are ready, call 0345 464 0079 or drop us an email.
Advice
Questions from Crow
What guarantee comes with fire rated sealant in Crow?
All our work, in Crow and everywhere else, comes with a 12-month guarantee. We’re also fully insured and ARBOMaster approved.
Do you cover Crow for fire rated sealant?
Yes, Crow is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job, and we will send you a clear quote.
Do you offer different sealant colours?
Yes. Sealants come in white, clear, grey and other colours, and we will agree it with you first.
Will we have a record of what was sealed?
Yes. We note each location and the product that went in.
Will the old sealant be removed?
Yes, always, and completely. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
What fire rating will the seal have?
We don’t issue ratings or certificates ourselves. The performance comes from the product’s tested details and the specification from your assessor or designer, and we install to them.
What do you need from me for a quote?
A short description and the location. We will ask anything else we need to know.
Can you seal over the old sealant?
No, it won’t last. It can look neat for a few weeks, but the new layer lifts away from the old one. The old sealant has to come out completely.
How the job changes by surface
Plasterboard walls
Plasterboard partitions are common in flats, offices and conversions. We use a product tested in that kind of wall for each gap size.
Door frames
We deal with the gap around the frame, not the door. The door leaf, its seals and closer need a door specialist and we will mention anything we notice.