Hampshire · England
Fire-rated sealant in Poulner, Hampshire
Specialist fire rated sealant for Poulner: careful preparation, the right product and tidy work. Call for a quick quote.
- Damaged fire sealant left by other trades
- New service routes left unsealed after building work
- Gaps filled with a product that is not fire-rated
Fire rated sealant in Poulner, done properly
Fire stopping only performs as intended if it’s done to the detail: correct depth, correct backing and a product suited to the surfaces. That is the part we focus on, gap by gap. If you’re dealing with joints picked up in a fire-stopping survey and old fire sealant that has split or come away, we can help.
For a pub, café, guest house or shop in or near Poulner, its washrooms and kitchen need the same sealant care as any big building.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we will put it right.
- Place
- Poulner (BH24)
- Region
- Hampshire
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Surface by surface
Linear gaps
Long, narrow gaps appear where walls meet slabs and ceilings. We seal them to the tested detail, with backing where it’s needed.
Service penetrations
Wherever a service goes through a fire-resisting wall or floor, there’s a gap around it. The sealant is chosen for what passes through and how wide the gap is.
Do you need fire rated sealant in Poulner?
Much fire stopping is hidden: in ceiling voids, service risers and behind boxing. Out of view, damage sits unnoticed until someone inspects.
Keep an eye out for these signs:
- Unsealed gaps where pipes and cables go through a wall
- Linear gaps at the head of walls
- Unsealed gaps around fire door frames
- Cracked or shrunken fire-rated sealant
For site and facilities teams at buildings such as Poulner Infant School, fire-stopping around service openings should be restored whenever new services go in.
Comparing quotes
- How the joint is cleaned and prepared
- Whether all the old sealant comes out first
- What happens if they find a problem under the old sealant
- What product goes in the joint
Common questions in Poulner
Do you take on hotel work around Poulner?
Yes, hotels and guest houses are among the places we work. Rooms can be done a few at a time, so the building stays open.
Is Poulner in your area for fire rated sealant?
Yes. Our work covers London and the South East, and Poulner is part of that. You can call 0345 464 0079 or email us and tell us what needs doing, and we will give you a clear price.
Are you insured?
Yes. Mr Mastic is fully insured, with over 20 years’ experience in sealant work.
What do you put in the joint?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
How much does fire rated sealant cost in Poulner?
It depends on the job, so we quote each one individually. For a quick quote, call 0345 464 0079 or email us and let us know what needs doing and where.
Will you leave a mess?
We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.
Do I have to be there?
That depends on where the joints are. For work indoors, someone needs to let us in, and for outside work we’ll agree access with you when we book.
Will we have a record of what was sealed?
Yes. We note each location and the product that went in, so you have it on file.
Nearby places to Poulner
More services for Poulner
Landlords, agents and businesses in Poulner
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Workplaces and buildings in Poulner
Poulner has hotels and guest accommodation in and around it. Hotel work can be planned room by room, with out-of-hours working where needed. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
For buildings such as St John the Baptist, gaps around pipes and cables are worth checking after any building work there.
Poulner is about 1 mile north-east of Ringwood, in Hampshire. For fire rated sealant in and around Poulner, please ring 0345 464 0079 or send us an email for a quick quote. We’re based in Crawley and cover Hampshire, Poulner included. Our area takes in 683 places across Hampshire. Our Southampton page covers work nearby.
Every address in BH24 is within our area for fire rated sealant. If you need fire rated sealant at a property on Oak Lane, Link Road and Croft Road or a nearby road, our applicators can take on the job. If you’re just outside Poulner, we cover Ringwood (1 mile south-west), Hightown (1 mile south), Hangersley (1 mile north-east), Blashford (1 mile north-west) and Forest Corner (1 mile east). We also work in nearby towns such as Totton (12 miles east), Lymington (12 miles south-east), New Milton (8 miles south-east), Barton on Sea (9 miles south-east), Marchwood (14 miles east) and Ashley (8 miles south-east).
Around Poulner
Around Poulner, our work takes us to homes and buildings near Ringwood School Academy and White Hart Public House, among other places. Other landmarks nearby include St Leonard's Hospital (4.4 miles south-west). The countryside around Poulner includes Linbrook Lake and Blashford Lakes.
Keeping the joints in good condition
So the new joints stay in good condition:
- Do not paint over fire sealant until it has cured
- Make resealing part of every contractor’s brief
- Plan fire stopping into any work that goes through walls or floors
- Photograph sealed gaps before they’re covered up
Do not add foam, filler or ordinary sealant over a fire seal. If it needs repair, use the same type of product. We can tell you which product we used.
If a fire risk assessment has flagged a gap, don’t leave it for the next one. Get it sealed and recorded so the item can be closed.
What happens if it’s left?
An unsealed gap lets smoke and fire get round a wall that was built to hold them back. A proper seal lets the wall do its job again, and the work involved is often modest. Around Poulner, water from a failed joint in an older home can soak into timber and plaster, and that’s a much bigger job than renewing the sealant.
The cost depends on the size of the job, how hard the old material is to remove and access to the work. You’ll have a clear quote before any work starts.
Why us?
- Neat joints and a tidy finish
- We never seal over old sealant
- Arbo and Everbuild products
- Approved under the ARBOMaster scheme
Take a look at how sealant jobs are priced and our reviews.
Should I try it myself first?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
The process
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The job generally takes anything from a few hours to several days, depending on how many gaps there are, including the tidy-up. In a smaller place like Poulner, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products for your files.
How to prepare
- Let us know about stairs, lifts or work at height
- On commercial sites, let us know about site rules
- Mention any leaks or damp you’ve noticed
Get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.