Hampshire · England

Marchwood Glazing Silicone

Glazing silicone for conservatories, rooflights, glass panels and shower screens in Marchwood, with a one-year guarantee on every job. Ask us for a quote.

  • Mouldy sealant around glass panels
  • Water getting into a conservatory at the joints
  • Water running down inside the glass

Glazing silicone for Marchwood homes and businesses

How we handle glazing silicone in Marchwood

Glazing silicone is a maintenance item. Weather and movement take their toll, and once it cracks, water follows. Resealing puts that right. Typical jobs include mouldy sealant around glass panels and drips on the inside of a conservatory window, on glass balustrade bases, glass-to-glass joints and conservatory frames.

Around Marchwood, conservatories, garden rooms and patio doors are often part of the house. Those joints need the same attention as the main windows, and any older timber or sash windows need a sealant that suits them.

You are covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or email us.

Where
Marchwood (SO40)
Wider area
Hampshire
Cover
One year on every job
Price
A clear price before we start
Phone
0345 464 0079
Page updated
26 October 2026
Applicator reaching up to seal an external door frame on a sunny day

When it is not the sealant

New sealant cannot fix everything, and we will tell you before we start. It will not solve:

  • Water coming through the roof rather than a sealant joint
  • Cracked or broken glass
  • A frame that needs repairing or replacing

Not sure which it is? You can ring 0345 464 0079 or send us an email and we will tell you honestly.

What we seal

  • Glass-to-glass joints
  • Rooflights
  • Shower screens
  • Glass balustrade bases
  • Glass-to-frame joints
  • Conservatory frames

Why it’s worth doing now in Marchwood

Fixing a leaking screen early protects what’s underneath. A small leak can reach the floor below before you notice. In an older home around Marchwood, damp from a failed joint can get into timber and plaster, and that is a much bigger job than renewing the sealant.

Combining jobs into one visit usually makes better use of the time than several visits, so tell us about everything that needs sealing. We will give you a clear price for the lot.

Why Marchwood clients choose us

  • We agree the colour with you first
  • Old sealant always removed completely
  • Full insurance on every job
  • An ARBOMaster approved applicator

Read how sealant jobs are priced or our reviews.

Landlords, agents and businesses in Marchwood

From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.

We also work for property managers and facilities teams. Several sites can go on one quote, and we are fully insured.

How the visit works

We bring everything the job needs with us, so you don’t need to buy or prepare anything. Once we have agreed what’s being done, we protect the area and start. It normally takes anything from an hour or two to most of a day, depending on the size of the job. Parking around Marchwood is generally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.

  1. We trace the leak and confirm it’s a sealant joint.
  2. The failed silicone is cut out without marking the glass or frame.
  3. The joint is cleaned and degreased.
  4. We lay the new bead and tool it smooth.
  5. Each joint is checked and, where possible, water-tested.

How to prepare

  • Let us know about parking restrictions
  • Keep pets and children clear of the area while we work
  • For business premises, tell us about site rules or sign-in

Ask for a quote

Asking for a quote is easy: let us know the job and the location. Photos by email help us understand the job.

Ask for a quote

Advice

When to call us in Marchwood

UV light ages silicone and roof joints get the most sun. It goes brittle, cracks and stops sticking to the glass and frame.

The most common problems we see are:

  • Black or yellowed silicone on glass joints
  • Shower screens leaking along the wall or tray
  • Leaks where conservatory glass meets the frame
  • Glazing silicone that has cracked or come away

If you let a flat or house near Millbrook (Hants) station, leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies.

What your quote should include

  • When the joint can take water or movement
  • Is VAT in the price?
  • How the joint is cleaned and prepared
  • What product goes in the joint

Our hiring checklist

Looking after it afterwards

Aftercare is simple:

  • Do not leave a drip for the next storm
  • Squeegee the shower screen after each use
  • Check the silicone on glass every year or so
  • Clear the conservatory gutters regularly

Avoid scraping near the new silicone when you clean. Stick to a soft cloth.

Shower screen leaks can go unnoticed. Water can soak into the floor or reach the room below before you spot it.

What glazing silicone looks like in Marchwood

Marchwood is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on glazing joints and frame seals, especially on the side facing the sea. With historic houses such as Southampton Tudor House and Garden (about 2 miles east) nearby, there’s older building stock in the area around Marchwood as well as newer homes. In older buildings, older timber frames in brick or stone need a different approach from a modern uPVC window.

For an older house near a landmark such as Church of St John the Apostle, the joint between an old wall and a newer frame is usually the first place rain gets in. If you look after a building such as Marchwood Junior School, its window and door frames need their mastic kept sound, just like a home’s.

Marchwood is about 3 miles south-east of Totton, in Hampshire. If you need glazing silicone in Marchwood, it’s easy to get a quote: please call 0345 464 0079 or send us an email. We cover Hampshire from our Crawley base. Marchwood is one of 683 places in Hampshire where we work.

Here we cover the SO40 postcode area for glazing silicone. That includes homes and businesses on Cranberry Close, Melick Close and The Rowans and the roads around them. Being close to the A326, Marchwood is easy for our applicators to reach. We also cover Dibden (2 miles south-east), Dibden Purlieu (3 miles south-east), Hythe (3 miles south-east), Beaulieu (5 miles south) and Furzey Lodge (5 miles south). Further out, we also cover Winchester (13 miles north-east), Gosport (14 miles south-east), Eastleigh (7 miles north-east), Fareham (11 miles east), Totton (3 miles north-west) and Chandler's Ford (7 miles north-east).

What’s near Marchwood

Around Marchwood, our work takes us to homes and buildings near White Horse pub and Hounsdown School. The nearest railway station is Millbrook (Hants) station, about 1.6 miles north-east. Nearby you’ll also find Netley Castle (4.1 miles east) and Westquay (2.1 miles east). Green spaces nearby include Testwood Lakes.

Map of Marchwood © OpenStreetMap contributors

Your questions about glazing silicone in Marchwood

Does living near the coast affect glazing silicone in Marchwood?

Coastal homes put outside sealant through more weather than inland ones, so the choice of sealant and the preparation matter even more. Walls facing the sea are normally the first to need attention.

Can you help a landlord with a rental near Millbrook (Hants) station?

Yes, landlords and agents are among the people we work for. Just call 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll give you a clear price.

How much does glazing silicone cost in Marchwood?

Size, access and the old material all affect the cost. Ask us for a quote.

What do you need from me for a quote?

Where the job is, what the problem is and roughly how big it is. If you can, email a few photos.

What guarantee do I get?

There’s a 12-month guarantee on every job, glazing sealant included.

Can you reseal the base of a glass balustrade?

Yes, we reseal the joint at the base channel. We do not install or replace the glass.

When is the sealant fully cured?

That depends on the sealant used, so please follow the time we give you when we finish.

Will it make a mess?

No. We work neatly, protect the area around the joints and tidy up afterwards.

What the job involves on each surface

Glass balustrade bases

Outdoor balustrade joints face the weather. Renewing the sealant keeps water out of the channel.

Conservatory frames

The joints where the conservatory meets the house take a lot of movement. They’re resealed with a suitable sealant.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job