Hampshire · England
Dibden Purlieu Glazing Silicone
Glazing silicone for Dibden Purlieu, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Drips on the inside of a conservatory window
- Water getting into a conservatory at the joints
- Shower screens leaking along the wall or tray
Frames and glazing around Dibden Purlieu
Dibden Purlieu is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That is hard on glazing joints and frame seals, especially on the side facing the sea. Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Rented homes near Southampton Town Quay station change hands often, and leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies. If you look after a building such as Wildground Infant School, its window and door frames need their mastic kept sound, just like a home’s.
Dibden Purlieu is about 4 miles south of Southampton, in Hampshire. Across the SO45 area, we can carry out glazing silicone at your property. Dibden Purlieu is one of 683 places in Hampshire we cover.
Every address in SO45 is covered for glazing silicone. Glazing silicone is available to properties on Haynes Way, Beaulieu Road and Noads Way. We also cover Hythe (1 mile north-east), Dibden (1 mile north-west), The Hummicks (3 miles south), Beaulieu (3 miles south-west) and Marchwood (3 miles north-west). We also work in nearby towns such as Winchester (15 miles north), Gosport (12 miles east), Eastleigh (8 miles north), Fareham (9 miles east), Totton (6 miles north-west) and Chandler's Ford (9 miles north).
Near you in Dibden Purlieu
Locally, jobs take us to homes and businesses close to Testwood School and Noadswood School. For rail, the closest station is Southampton Town Quay station, roughly 2.8 miles north. A little further out are Beaulieu Abbey And Display Of Monastic Life (2.8 miles south-west) and Netley Castle (2.8 miles north-east). The countryside around Dibden Purlieu includes Mercury Marshes.
Glazing silicone for homes and businesses in Dibden Purlieu
We work across Dibden Purlieu on glazing joints for homes and businesses. From conservatories to shower screens, it’s the same careful method. Common call-outs are for glazing silicone that has cracked or come away and mouldy sealant around glass panels, across conservatory frames, shower screens and glass-to-frame joints.
Houses in smaller places like Dibden Purlieu can stand more in the open than those in a built-up town, so exposed windows and doors face the weather head on. The mastic around frames on those walls tends to age faster.
All of our work is guaranteed for twelve months.
- Where
- Dibden Purlieu (SO45)
- Region
- Hampshire
- Guarantee
- One year on every job
- Quotes
- A clear price before we start
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Dibden Purlieu: your questions answered
Do you work for landlords with property near Southampton Town Quay station?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before work begins.
Do you cover smaller places like Dibden Purlieu?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do the sealants smell?
Possibly a little. It fades as the sealant cures, and ventilation helps.
Where are you based?
Our base is Crawley. We work across South East England, London and Scotland.
What sealant do you use on glazing?
We use a neutral-cure glazing silicone suited to glass and the frame. In bathrooms, we use anti-fungal silicone.
How long does the job take?
A typical job takes anything from an hour or two to most of a day, depending on the size of the job. Your quote will say how long we expect yours to take.
Are you ARBOMaster approved?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
When is the sealant fully cured?
That depends on the sealant used, so follow the cure time we give you.
How it works
Most of a good job is in the preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours, depending on how many joints need doing. A visit to Dibden Purlieu is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We find where water is getting in and check whether it’s a sealant joint.
- Old silicone is cut away from the glass and frame without scratching either.
- The glass and frame are cleaned and degreased.
- We apply a neutral-cure glazing silicone and tool it smooth.
- We look over every joint and, where we can, test it with water.
Getting ready for the visit
- Let us know about parking restrictions
- Let us know about stairs, lifts or work at height
- Mention if the joints have been sealed before
Get a quote
There’s no standard price list, as no two jobs are quite the same. Instead, we give you a clear price for your job. To get started, call 0345 464 0079 or send us an email.
Advice
Signs you need glazing silicone in Dibden Purlieu
Sunlight breaks sealant down, especially on conservatory roofs. Old silicone hardens, cracks and loses its grip on the glass.
These are the problems we’re asked about most:
- Failed sealant around rooflight glass
- New silicone smeared over old sealant
- Glass-to-glass joints that have split
- Silicone pulling away from the glass
For an older house near a landmark such as St. Andrew's Church and Centre, replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint.
Questions to ask before booking
- What preparation is included
- What happens if they find a problem under the old sealant
- Which colour the sealant will be
- Is the old sealant removed completely?
How we quote for glazing silicone
You will get a clear quote before we start. It’s based on:
- How many areas need sealing
- The type of sealant required
- How much old sealant there is and how hard it is to remove
- When we can work, for business premises
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
Asking for a quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- What’s wrong with the joints now
- Whether it’s a home or a business
- Where the job is, and your postcode
- Any access issues, like height or stairs
Every job is quoted individually, so start by telling us what you need. Just call 0345 464 0079 or send us an email with the details and send photos if you have them.
Towns and villages near Dibden Purlieu
What else we do in Dibden Purlieu
Aftercare tips
Looking after new joints is easy:
- Check the gutters above the glazing for debris
- Run a squeegee over the glass when you are done
- Act on drips or damp patches early
- Avoid strong solvents on or near the sealant
Keep the new joints dry for as long as we advise. After that, clean glass with a mild cleaner.
Shower screen leaks can go unnoticed. It can damage the floor or the ceiling below before you spot it.
Landlords, agents and businesses in Dibden Purlieu
We work for letting agents and landlords as well as householders. Resealing between tenancies keeps a property looking cared for before the next move-in.
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
Surface by surface
Rooflights
Water around a rooflight isn’t always the sealant. We find the cause first.
Shower screens
A screen’s wall joint and tray joint are where leaks start. We reseal both with anti-fungal silicone.
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.