Hampshire · England
Glazing Silicone in Anmore
Professional glazing silicone in and around Anmore, with old sealant always removed completely.
- A quick top-up bead that didn’t last
- Water tracking down the inner face of the glass
- Failed joints on frameless glass
Why act early in Anmore
A leaking joint will not fix itself. Left, water can mark floors, damage plaster and rot timber so early action saves a bigger repair. Where a wall is exposed, as many are in small places like Anmore, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all play a part.
Why us?
- Sealant colour chosen to suit
- Full insurance on every job
- Experience in homes, commercial sites and hotels
- Anti-fungal sanitary silicone in wet areas
How we handle glazing silicone in Anmore
Our work covers conservatory joints, rooflights and glass panels plus shower screens and the bases of glass balustrades. Each joint is cut out, cleaned and resealed. Typical jobs include conservatory leaks at frame and glazing joints and stained, discoloured glazing silicone, on glass-to-glass joints, glass balustrade bases and glass-to-frame joints.
Outdoor sealant needs dry, clean surfaces, so work on frames around Anmore is planned for dry weather. Let us know about access to all the frames, upstairs ones included.
All our work comes with our 12-month guarantee, wherever you are in Hampshire.
- Where
- Anmore (PO7)
- Region
- Hampshire
- Guarantee
- A year, on every job
- Quote
- A clear price before we start
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
When something else is needed
It helps to know what we can’t do too:
- Cracked or broken glass
- A sagging or failing conservatory roof
- A frame that needs repairing or replacing
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we’ll tell you honestly before you book.
Surfaces we seal
- Glass-to-glass joints
- Rooflights
- Shower screens
- Glass balustrade bases
- Conservatory frames
- Glass-to-frame joints
How it works
On the day, we start by going over the job with you, so there are no surprises. Surfaces next to the work are protected before we start. The work generally takes a few hours, depending on how many joints need doing. Somewhere like Anmore needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We find where water is getting in and check whether it’s a sealant joint.
- Old silicone is cut away from the glass and frame without scratching either.
- The glass and frame are cleaned and degreased.
- Glazing silicone suited to the joint is applied and tooled.
- We look over every joint and, where we can, test it with water.
Getting ready for the visit
- Mention any sign-in or site rules at work premises
- Let us know if you’ve seen damp or leaks
- Clear the area around the work
How to get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Advice
Can I do it myself?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so just mention it when you contact us.
When to call us in Anmore
Glass and frames expand and contract with the temperature, and they do not move by the same amount. Over years, that movement tears the silicone.
The most common problems we see are:
- Split or lifting silicone on glass
- Failed joints on frameless glass
- A quick top-up bead that didn’t last
- Water escaping where a screen meets the wall
Rented homes near Bedhampton station change hands often, and glazing joints are worth checking at the end of a tenancy, before a small leak grows.
Before you book anyone
- Is the old sealant removed completely?
- What the cure time is
- Which colour the sealant will be
- The length of the guarantee
Frames and glazing around Anmore
Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
If you look after a building such as Denmead Infant School, the mastic around its windows and doors needs looking after like any other building’s.
Anmore is about 1 mile north-west of Waterlooville, in Hampshire. Whether you’re in the middle of Anmore or further out, glazing silicone is available for homes and businesses alike. Anmore is one of 683 towns and villages in Hampshire we cover. There’s also a page for Portsmouth, roughly 7 miles from Anmore.
Work in PO7 is quoted and booked the same way as anywhere else. Glazing silicone is available to properties on Anmore Road and Soake Road and the roads around them. We also cover the places around Anmore: Wecock Farm (1 mile east), Denmead (1 mile west), Lovedean (1 mile north-east), Horndean (2 miles east) and Anthill Common (2 miles west). We also work in nearby towns such as Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).
Near you in Anmore
Locally, jobs take us to homes and businesses close to The Cowplain School and The Mead End pub. The nearest railway station is Bedhampton station, roughly 4 miles south-east of the centre. A little further out are Queen Alexandra Hospital (3.6 miles south) and Clanfield Earthwork (4.3 miles north-east). Green spaces nearby include St Clair's Meadow and Windmill Hill.
Work for landlords, hotels and businesses
For anyone letting property in or around Anmore, jobs at different addresses can go on one quote. Send us the addresses and the work at each.
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can be quoted together.
How the job changes by surface
Conservatory frames
Leaks often start where the frame meets the wall. We remove the failed sealant and renew it.
Glass balustrade bases
The base of a glass balustrade is normally sealed. Failed sealant there lets water collect.
FAQs for Anmore
Do you cover Anmore for glazing silicone?
Yes. Our work covers London and the South East, and Anmore is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job, and we will give you a clear quote.
Will you come out to Anmore?
Yes, Anmore is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Will you leave a mess?
We keep the work tidy. Nearby surfaces are protected.
Do you remove the old sealant?
Yes. All of the old material is cut out and the joint cleaned.
Do you hold any approvals?
Yes. We are an ARBOMaster approved applicator.
When is the sealant fully cured?
Cure times vary by product. Before we leave, we’ll tell you the cure time.
Should I try DIY first?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs.
Can you work on commercial sites?
Yes. We work in offices, washrooms, hotels and other commercial premises. We can talk about working times when we quote.