Hampshire · England
Window & door mastic in Anmore, Hampshire
Window mastic for Anmore and the surrounding area: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Black, perished sealant on frames
- White mastic on grey or black frames
- Cracked or shrunken mastic around the frame
Frames and glazing around Anmore
Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
Schools such as Denmead Infant School are buildings too, and larger buildings have plenty of frames, and the mastic around each one ages.
Anmore is about 1 mile north-west of Waterlooville, in Hampshire. Whether you are in the middle of Anmore or further out, window mastic is available for homes and businesses alike, from flats and houses to offices and hotels. Across Hampshire, we cover 683 places, and Anmore is one of them. We also work in Portsmouth, around 7 miles away.
Our applicators cover all of the PO7 postcode area for window mastic. If you need window mastic at a property on Anmore Road and Soake Road or anywhere close by, our applicators can take on the job. Nearby, we also carry out window mastic in Wecock Farm (1 mile east), Denmead (1 mile west), Lovedean (1 mile north-east), Horndean (2 miles east) and Anthill Common (2 miles west). Within a short drive, we also cover Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).
Local landmarks in Anmore
Locally, jobs take us to homes and businesses close to The Cowplain School and The Mead End pub, among other places. The nearest railway station is Bedhampton station, about 4 miles south-east. Well-known places in the area include Queen Alexandra Hospital (3.6 miles south) and Clanfield Earthwork (4.3 miles north-east). Not far away are St Clair's Meadow and Windmill Hill.
How we handle window mastic in Anmore
Frames and walls don’t move together. Plastic and aluminium frames move with the temperature, while masonry stays fairly still. That is why the joint needs a flexible, low-modulus sealant rather than something rigid. We work on timber windows & doors, patio & French doors and aluminium frames, and common reasons people get in touch are draughty joints inside around the window and untidy mastic left by window fitters.
Somewhere as small as Anmore, older homes often have timber frames set in stone or brickwork. Older buildings like these don’t always suit modern silicone, and sometimes a traditional sand mastic is the better choice.
Our work is backed for twelve months.
- Where
- Anmore (PO7)
- Wider area
- Hampshire
- Cover
- One year on every job
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
When it is not the sealant
Sealant isn’t the answer to every problem, and we’d rather say so up front. It will not solve:
- Damp problems in the wall away from the window
- Broken hinges, locks or handles
- Rotten timber, which needs a joiner first
Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly before booking.
What we seal
- Window sills
- Aluminium frames
- Composite doors
- uPVC windows
- Patio & French doors
- Timber windows & doors
Surface by surface
Timber windows & doors
On period timber windows, traditional sand mastic is sometimes the better choice. We can talk through the options.
uPVC windows
uPVC expands and contracts noticeably with temperature, so the joint needs a low-modulus sealant that stays flexible. White is the usual colour, with brown, anthracite grey and black for coloured frames.
Landlords, agents and businesses in Anmore
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
Do you need window mastic in Anmore?
Frames are never completely still. A plastic or aluminium frame lengthens in sunshine and shortens as it cools, while the masonry beside it stays put. A sealant that can’t keep up eventually tears.
Keep an eye out for any of the following:
- A bead that does not match the frame
- Mastic that has split away from the wall
- Gaps between the frame and the inside reveal
- Untidy mastic left by window fitters
Letting a property close to Bedhampton station? Then renewing tired window mastic between tenants heads off draught and damp complaints.
What to look for in a quote
- How long to leave it before use
- Who does the work, and how experienced they are
- What insurance they hold
- What guarantee comes with the work
What happens if it’s left?
If you’re painting or rendering, reseal at the same time. Fresh joints finish the job neatly. Around Anmore, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part, and we’ll explain the quote if you ask.
Why us?
- A sealant colour to suit the surroundings
- Anti-fungal sanitary silicone in wet areas
- Over 20 years’ experience
- Tidy, careful work
See our cost guide and our reviews.
Nearby places to Anmore
Other services in Anmore
What we do, step by step
We work through the job in order: protect, prepare, seal, tidy. Typically it takes anything from an hour or two to a full day, depending on how many frames there are. Somewhere as small as Anmore, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- First, we go round the frames with you and agree the list.
- We remove the old mastic and clean the frame edge and wall.
- Where the gap is deep, backing rod goes in first.
- The new sealant goes on in white, brown, anthracite grey, black or clear to suit.
- We tool each bead neatly and check every joint is closed.
Preparing for the visit
- Plan for the work area to be out of bounds to pets and children
- Tell us about any water getting in
- Let us know about earlier repairs to the joints
Getting a quote
We do not publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, phone 0345 464 0079 or email us.
Advice
Your questions about window mastic in Anmore
Will you come out to Anmore?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you cover Anmore for window mastic?
Yes. Our work covers London and the South East, and Anmore is part of that. Just call 0345 464 0079 or drop us an email with a few details of the job.
Do you guarantee window mastic?
Yes. All our work carries a 12-month guarantee, and we’re fully insured.
Do you have insurance?
Yes. We are fully insured for every job we do.
Do you work for hotels and businesses?
Yes. Hotels, offices and other businesses use us and we’re fully insured.
Should I try DIY first?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs.
Is it OK to seal over old sealant?
No, and we never do. It may look fine at first, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.
How many windows can you do in a day?
That depends on the number of frames, how they’re reached and the state of the old mastic. We’ll tell you how long your job needs when we quote.
What affects the cost of window mastic
Your quote is based on your job. We look at:
- The number of rooms or windows
- Which sealant suits the joint
- Whether old sealant or filler has to be cut out
- Access and height
What you pay reflects the work, not a rough estimate. That’s why we ask a few questions first.
What we need to know
Before you ask for a quote, have a think about:
- The rough size of the job
- If someone has resealed it before
- What the problem is, such as mould, gaps, leaks or cracking
- The address or postcode of the job
For a quick quote, get us on the phone, or email us if that’s easier. Tell us about the joints that need doing and we’ll talk you through the work.