Hampshire · England
Anmore Gutter Sealing
Gutter and fascia joints in Anmore need attention? We cut out the old, prepare the joints and apply the right sealant.
- Rain getting in around a garage door
- Wet patches on the wall under a gutter joint
- Quick sealant fixes on gutters that didn’t last
How we handle gutter sealing in Anmore
We work across Anmore on leaking gutter joints and roofline trims. Single-storey and low gutters are simple to reach, and for higher work, tell us about access and we’ll confirm what’s needed. We work on soffit joints, garage door frames and gutter end caps, and the jobs we see most are leaking gutter joints and stop ends and failed sealant on a garage door frame.
In a village or hamlet like Anmore, older cottages and farm buildings often stand in the open, where walls and rooflines take the weather head on. Gutter joints and wall joints there need a sealant that can flex and stay put.
We stand behind the work with a one-year guarantee, so you are covered after we’ve gone.
- Location
- Anmore (PO7)
- Wider area
- Hampshire
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Why act early in Anmore
You do not need new fascias just because the joints have opened. Sealing the joints tidies them up if the boards are sound. In a small place like Anmore, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Combining jobs into one visit usually makes better use of the time than several visits. You’ll get one clear quote for the whole job.
Why Anmore clients choose us
- Experience in homes, commercial sites and hotels
- More than 20 years in sealant work
- 4.9 on Google from 180+ five-star reviews
- Colour agreed with you before we start
Read how sealant jobs are priced and customer reviews.
DIY versus a professional finish
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
Landlords, agents and businesses in Anmore
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
What happens on the day
All our tools and materials come with us in the van, so you don’t need to buy or prepare anything. After a quick look at the joints together, we protect the area and start. It normally takes anything from an hour or two to a few hours. For a village or hamlet like Anmore, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We start by tracing the leak and checking the gutter itself is sound.
- The joint or trim is cleaned out and old sealant removed.
- We make sure the joint is dry before sealing.
- An exterior or gutter sealant is applied to the joint.
- We check the run and clear any debris we find while we’re there.
Getting ready for the visit
- Tell us if parking is tricky
- For indoor joints, keep the area dry beforehand if you can
- Let us know if you’ve seen damp or leaks
Get a quote
Need a quote? Please phone 0345 464 0079 or drop us an email with a few details. We will explain what we’d do and send you a clear quote before work begins.
Advice
Keeping the joints in good condition
Looking after new joints is easy:
- Watch for drips in a downpour
- Check fascia and soffit joints for gaps
- Deal with a drip before winter
- Keep an eye out for wet patches below a joint
A sagging gutter needs its brackets checked. Movement will pull the joints open again.
Split sealant on fascias and trims lets water in behind. Sealing it early keeps the boards behind dry.
Also in Anmore
What affects the quote in Anmore
We quote each job individually. This is what makes a difference:
- Mould in or behind the old joints
- Any working-time requirements on site
- The size of the job
- The old material and how stubborn it is
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
Helping us quote
Photos by email are helpful but not essential. Please mention:
- How we’d reach the joints
- The rough size of the job
- Where the property is
- If someone has resealed it before
Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. A few photos by email make the job easier to understand, and we will come back to you with a quote.
What we’re called out for in Anmore
A sealant applied to a damp or dirty joint will not bond. Some quick repairs peel off within a season or two for this reason.
Keep an eye out for any of the following:
- Open joints in fascias and soffits
- Garage door frames letting rain in
- Earlier gutter repairs that have peeled off
- Cracked sealant along roofline trims
Schools such as Denmead Infant School are buildings too, and movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
Questions to ask before booking
- What happens if they find a problem under the old sealant
- Whether you can choose the colour
- What preparation is included
- Is VAT in the price?
Gutter sealing in Anmore: local notes
Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
Letting a property close to Bedhampton station? Then a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking.
Anmore is about 1 mile north-west of Waterlooville, in Hampshire. If you need gutter sealing in Anmore, it’s easy to get a quote: please call 0345 464 0079 or send us an email. We’re based in Crawley and cover Hampshire, Anmore included. Anmore is one of 683 towns and villages in Hampshire we cover for gutter sealing. For nearby work, see our Portsmouth page (7 miles or so).
Postcode districts we cover here for gutter sealing: PO7. If you need gutter sealing at a property on Anmore Road and Soake Road or anywhere close by, our applicators can take on the job. We also cover Wecock Farm (1 mile east), Denmead (1 mile west), Lovedean (1 mile north-east), Horndean (2 miles east) and Anthill Common (2 miles west). Within a short drive, we also cover Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).
Near you in Anmore
Locally, jobs take us to homes and businesses close to The Cowplain School and The Mead End pub, among other places. The nearest railway station is Bedhampton station, roughly 4 miles south-east. A little further out are Queen Alexandra Hospital (3.6 miles south) and Clanfield Earthwork (4.3 miles north-east). Open spaces near Anmore include St Clair's Meadow and Windmill Hill.
Questions from Anmore
Is Anmore within the area you cover?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Can you help a landlord with a rental near Bedhampton station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Do you have insurance?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
Do you seal gaps in fascias and soffits?
Yes. Our work is the joints and we will let you know if a board has failed.
Do you clean gutters?
We clear debris near the joints because the joint must be clean. A full gutter clean is a separate job.
Do I need to be at home?
We need access to the joints, so we will agree that with you when we book. Indoors, that generally means someone at home.
Can you work on commercial sites?
Yes. We can plan bigger jobs in stages to suit the site.
Is it possible to stop a gutter joint dripping with sealant?
Yes, as long as the gutter itself is in good order. The joint is cleaned and dried first so the seal holds.