Kent · England
Ripple Floor Joint Sealing
Professional floor joint sealing in and around Ripple, with old sealant always removed completely.
- Caulk that has cracked where the floor moves
- Tiled floors with no room to move
- Perimeter joints in tiled floors filled with grout
How to look after the new joints
After the cure time, these simple habits help:
- Check skirting joints after the heating season
- Mark off resealed joints in warehouses
- Avoid sloshing water against skirting
- Lift furniture rather than dragging it across joints
Keep heavy furniture from dragging across the joints. Sharp edges can cut the sealant.
Open skirting gaps let in draughts, dust and sometimes insects. Sealing it keeps the room tidier and stops it getting worse.
How we handle floor joint sealing in Ripple
Thresholds are where two floors, or a floor and a door, meet. We seal them with a flexible sealant suited to the floor finishes either side so the joint stays neat. Common call-outs are for failed joint filler in concrete floors and grout cracking in a straight line across a floor, on concrete floor joints, wet room & bathroom floors and commercial floors.
Somewhere as small as Ripple, new homes tend to be conversions, self-builds or a few houses rather than an estate. Every one needs its sealant and floor joints done properly, whatever the size of the site.
We stand behind the work with a one-year guarantee, so you are covered after we’ve gone.
- Where
- Ripple (CT14)
- Wider area
- Kent
- Guarantee
- One year on every job
- Price
- A clear price before work begins
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Do you need floor joint sealing in Ripple?
When a tiled floor has no movement joints, the grout takes the strain. You will see a crack running along the grout, showing where a movement joint was needed.
Keep an eye out for any of the following:
- Skirting that has pulled away from the floor
- Skirting caulk that keeps splitting
- Worn sealant at door thresholds
- Grout used at the floor edge instead of sealant
Rented homes near Walmer station change hands often, and gaps at skirtings and thresholds are worth sealing between tenancies.
What to look for in a quote
- What the quote includes, VAT included or not
- Who does the work, and how experienced they are
- What happens if the job turns out different
- Which colour the sealant will be
Places near Ripple
Other services in Ripple
New homes and floors in Ripple
Across Kent, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they do not all move the same way. That is why the skirting and threshold joints need a flexible seal.
Community buildings like Church of St Mary the Virgin are part of the picture too: joints in its floors, skirtings and thresholds need resealing as they wear. If you look after a building such as St Mary's Catholic Primary School, entrance and corridor floor joints take a lot of traffic.
Ripple is about 2 miles south-west of Deal, in Kent. For floor joint sealing in and around Ripple, please call 0345 464 0079 or drop us an email for a quick quote. We cover Kent from our Crawley base. Ripple is one of 922 places in Kent we cover for floor joint sealing. You can also see our page for Chelmsford, about 53 miles away.
We work across CT14 for floor joint sealing. If you need floor joint sealing at a property on Mongeham Road, Sunnyside Close and Sutton Lane or a nearby road, we can help. We also cover the places around Ripple: Great Mongeham (1 mile north), Mill Hill (1 mile north-east), Northbourne (2 miles north-west), Sholden Meadows (2 miles north) and Sholden (2 miles north-east). We also work in nearby towns such as Canterbury (13 miles north-west), Margate (12 miles north), Dover (5 miles south-west), Folkestone (12 miles south-west), Ramsgate (10 miles north) and Broadstairs (12 miles north).
Around Ripple
In Ripple, that means homes and buildings near Goodwin Academy and the streets around them. For rail, the closest station is Walmer station, about 1.1 miles east of the centre. A little further out are Royal Victoria Hospital (5.5 miles south-west) and Kent Museum of the Moving Image (2.4 miles north-east).
Common questions in Ripple
Will you come out to Ripple?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Is Ripple in your area for floor joint sealing?
Yes. We work across London and the South East, and Ripple is part of that. You can call 0345 464 0079 or send us an email and tell us what needs doing, and we will give you a clear quote.
Where are you based?
Our base is Crawley. Our area covers South East England, London and Scotland.
Can you reseal concrete floor joints in an industrial unit?
Yes. We reseal concrete floor joints in commercial and industrial units. We will talk through the traffic and choose a sealant suited to it.
Do you offer different sealant colours?
In most cases you can choose. We will explain which colours are available.
Can you add a movement joint to a tiled floor?
In many cases, yes. Where a floor needs one, we rake out grout along the right line and replace it with flexible sealant. If tiles are loose, that needs fixing first.
Do you use a paintable sealant?
It depends on the sealant, so let us know first. Joints that will be painted get a paintable product.
Is it OK to seal over old sealant?
No. We remove every bit of old sealant first, so the new sealant bonds properly.
What happens on the day
When we arrive, we start by going over the job with you, so you know exactly what we’re doing. We protect the surfaces around the joints before any work starts. Most jobs take a few hours for most rooms, longer for large commercial floors. In a small place like Ripple, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We clear the edges of the floor so the joints are easy to reach.
- Old material is removed from the joint.
- Edges are cleaned and dried.
- We apply a flexible sealant suited to the floor and tooled.
- We check the joints and explain the aftercare.
Before we arrive
- Move anything stored near the joints
- Mention any leaks or damp you’ve noticed
- Keep pets and children clear of the area while we work
How to get a quote
We don’t publish a price list. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or send us an email.
Read more
Why deal with it now?
An open concrete floor joint gets wider every time something heavy crosses it. A sealed joint supports the edges before they need a bigger repair. Where a wall is exposed, as many are in small places like Ripple, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll explain what it covers.
Why choose Mr Mastic in Ripple
- White, clear, grey or another colour, product permitting
- Anti-fungal sanitary silicone in wet areas
- Domestic, commercial and hotel work
- Old sealant always removed completely
Take a look at our cost guide and what customers say.
For landlords and businesses
Housing providers, facilities teams and property managers book us too. Several sites can be quoted together, and we’re fully insured.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
DIY sealant or a professional job?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
How we quote for floor joint sealing
Jobs vary more than people expect. What affects the quote:
- Any working-time requirements on site
- The number of rooms or windows
- Mould in or behind the old joints
- Access and height
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
Helping us quote
Before you ask for a quote, have a think about:
- Where the property is
- The rough size of the job
- The type of property
- Any access issues, like height or stairs
Need a quote? Please ring 0345 464 0079 or drop us an email and tell us about the job. We’ll explain what we’d do and send you a clear quote before work begins.