Kent · England
Floor & skirting joints in Mill Hill, Kent
Problem with your floor joints in Mill Hill? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Open joints around bathroom floor edges
- Cracked grout where a tiled floor needs a movement joint
- Floor edges that trap water and grime
Floor joint sealing for homes and businesses in Mill Hill
Where skirting is painted, we can use a flexible sealant that takes paint. For bathrooms and kitchens, silicone is normally the better choice. If you are dealing with worn sealant at door thresholds and failed joint filler in concrete floors, we can put it right, on commercial floors, tiled floors and wet room & bathroom floors alike.
For a new home in or near Mill Hill, it’s worth checking the sealant early. Common snags include open skirting joints, lifting shower seals and gaps around frames.
We stand behind the work with a one-year guarantee, so you are covered after we have gone.
- Place
- Mill Hill (CT14)
- Wider area
- Kent
- Cover
- One year on every job
- Price
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Signs you need floor joint sealing in Mill Hill
A floor laid tight to the walls has no room to move. It pushes against the walls and skirting as it expands.
The problems people normally mention when they call include:
- Concrete floor joints that have broken down
- Perimeter joints in tiled floors filled with grout
- Open joints that fill with dirt
- Cracked caulk along skirting in bathrooms and kitchens
For landlords with property near Walmer station, open skirting and floor joints collect dirt and water, so seal them while the property is empty.
Before booking anyone
- How the colour is chosen
- How the surfaces are prepared before sealing
- Which sealant they’ll use, and why
- Whether they’re fully insured
Common questions in Mill Hill
Will you come out to Mill Hill?
Yes, Mill Hill is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
I let a flat near Walmer station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just call 0345 464 0079 or email us with the address and what needs doing, and we’ll give you a clear quote.
What does floor joint sealing cost?
It depends on the job, so we quote each one individually. For a quick quote, ring 0345 464 0079 or email us and tell us what needs doing and where.
Do I have to be there?
That depends on where the joints are. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
How long before the joint can take traffic?
It depends on the product and the conditions. We give you the times for walking, cleaning and traffic when we finish so you can plan.
How long does floor joint sealing take?
It depends on the size of the job, but most jobs take a few hours for most rooms, longer for large commercial floors. We’ll give you a better idea when we quote.
Do you seal kitchen plinths to the floor?
Yes. We cut out any old sealant or caulk and reseal with flexible silicone, colour-matched where it shows.
Are you ARBOMaster approved?
Yes. We are an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
How the job changes by surface
Tiled floors
The edge of a tiled floor, where it meets the wall or skirting, should be a flexible joint. Grout at the edge is removed and replaced with sealant.
Commercial floors
Shops, offices, warehouses and units all have floor joints that need sealing. The sealant is chosen for the traffic the floor takes.
Landlords, agents and businesses in Mill Hill
Landlords and letting agents in Mill Hill can book us as well as householders. Resealing between tenancies keeps a property looking cared for.
For anyone letting property in or around Mill Hill, jobs at different addresses can go on one quote. Send us the addresses and the work at each.
How it works
There’s no need to move everything out before we come, only the area right around the joints. We protect the rest, and the work takes a few hours, depending on the length of joint in most cases. For a job in Mill Hill, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- We clear the edges of the floor so the joints are easy to reach.
- Old material is removed from the joint.
- We clean and dry the edges of the joint.
- We apply a flexible sealant suited to the floor and tooled.
- We check the joints and explain the aftercare.
Getting ready for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Clear the area around the work
- On commercial sites, let us know about site rules
How to get a quote
Need a quote? Please call 0345 464 0079 or drop us an email and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Related advice
Places near Mill Hill
What else we do in Mill Hill
Why deal with it now?
Waiting until the next redecoration can mean a winter of draughts and dirt in the gaps. It’s a quick job to seal them now. In an older home around Mill Hill, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.
What you pay reflects the work, not a rough estimate. That is why we ask a few questions first.
Why us?
- White, clear, grey or coloured to suit, where the product allows
- Full insurance on every job
- More than 20 years in sealant work
- Tidy, careful work
Take a look at our cost guide and our reviews.
What floor joint sealing looks like in Mill Hill
Across Kent, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they do not all move the same way. The joint at the skirting or threshold has to allow for that.
If you look after a church, hall or community building such as St Richard, floor and skirting joints in halls and kitchens wear like any others. Managing a site like St Mary's Catholic Primary School? Then floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up.
Mill Hill is about 1 mile west of Deal, in Kent. Mill Hill gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Mill Hill is one of 922 towns and villages in Kent where we work for floor joint sealing. You can also see our page for Chelmsford, about 53 miles away.
Every address in CT14 is within our area for floor joint sealing. Whether your property is on Mary Road, Glack Road and Lydia Road or anywhere close by, we can help. We also cover Great Mongeham (1 mile west), Deal (1 mile east), Sholden (1 mile north), Sholden Meadows (1 mile north) and Walmer (1 mile south-east). We also work in nearby towns such as Canterbury (14 miles west), Margate (12 miles north), Dover (6 miles south-west), Folkestone (13 miles south-west), Ramsgate (9 miles north) and Broadstairs (11 miles north).
Landmarks near Mill Hill
In Mill Hill, that means homes and buildings near The Mill Inn, Goodwin Academy and Betteshanger Park and the streets around them. The closest station to Mill Hill is Walmer station, about 0.7 miles south-east. A little further out are Kent Museum of the Moving Image (1.3 miles north-east) and Deal Castle (1.3 miles east).
Should I try it myself first?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly.
When it is not the sealant
Before you book, it’s worth knowing the limits:
- Cracked or broken concrete slabs
- Tiles that have lifted or broken
- Bouncy or failing floorboards
If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think before booking.
What we seal
- Wet room & bathroom floors
- Tiled floors
- Commercial floors
- Skirting boards
- Concrete floor joints
- Thresholds