Perth and Kinross · Scotland
Floor & skirting joints in Kenmore, Perth and Kinross
Our applicators work in Kenmore on sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints. Old sealant removed completely, joints prepared properly.
- Chipped and open joints in warehouse floors
- Skirting caulk that keeps splitting
- Open gaps along the bottom of skirting boards
What affects the quote in Kenmore
For a quick quote, just ask. What matters most is:
- When we can work, for business premises
- Any mould that needs treating
- How many rooms, windows or areas are involved
- How much old sealant there is and how hard it is to remove
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re not sure whether it needs doing, drop us a line at info@mrmastic.co.uk for an honest opinion and a quote.
What we need to know
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Whether it’s a home or a business
- Photos by email, if that is easy
- What’s wrong with the joints now
- Any access issues, like height or stairs
Getting a quote is simple: let us know the job and the location and its rough size. A few pictures by email make the job easier to understand, and we’ll come back to you with a quote.
Floor joint sealing for homes and businesses in Kenmore
Where skirting is painted, we can use a flexible sealant that takes paint. In wet areas we’d normally use silicone because it handles water. Common call-outs are for open joints that fill with dirt and cracked grout where a tiled floor needs a movement joint, on commercial floors, tiled floors and thresholds.
Many newer homes in Scotland are timber-framed and settle as they dry out, which shows as gaps at skirtings and floor joints. In older homes, timber floors move through the year too.
There’s a 12-month guarantee on every job, whatever its size.
- Place
- Kenmore (PH15)
- Region
- Perth and Kinross
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
What happens on the day
When we arrive, we look over the joints with you first, so there are no surprises. Surfaces next to the work are protected before we start. Most jobs take a morning or an afternoon for most homes. Outdoor work around Kenmore depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- We look at the gap and the floor type and agree the right sealant.
- We take out any old caulk, sealant or grout along the line.
- We clean and vacuum the joint and fit backing where the depth needs setting.
- The sealant goes in, chosen for the floor and coloured to suit it.
- We tool the joint neatly and tell you when it can be walked on and cleaned.
How to prepare
- Mention any sign-in or site rules at work premises
- Plan for the work area to be out of bounds to pets and children
- Mention any tricky access
Getting a quote
For a quote, drop us a line at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We’ll send you a clear quote before any work starts.
Read more
What we’re called out for in Kenmore
Floors and walls move a little with the seasons. Heating dries timber and opens gaps along the skirting, then close again in damper months.
Any of these means the joints need attention:
- Concrete floor joints that have broken down
- Skirting that has pulled away from the floor
- Dirt and water collecting in open floor joints
- Grout cracking in a straight line across a floor
Around Kenmore, as everywhere, floor joint sealing is only as good as the preparation behind it.
Comparing quotes
- What happens if they find a problem under the old sealant
- When the joint can take water or movement
- Whether VAT is included
- What insurance they hold
Landlord and commercial work in Kenmore
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
Common questions in Kenmore
Is Kenmore in your area for floor joint sealing?
Yes, Kenmore is within the area we cover. We work across all of Scotland. You can send an email to info@mrmastic.co.uk and let us know what needs doing.
Is floor joint sealing in Kenmore guaranteed?
Every job comes with our one-year guarantee, wherever it is. We are also fully insured and ARBOMaster approved.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Will you leave a mess?
No. The area is protected while we work and cleaned up afterwards.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just make sure your landlord agrees.
Do you take out the old sealant first?
Yes. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
Why not just use caulk?
Caulk can’t cope with movement or water. Floor edges move through the year, so a flexible sealant suits them better.
Can you seal where the floor meets the bath panel?
Yes. These joints get wet every time the floor is cleaned, so a flexible silicone is the right choice.
Leave it or put it right?
Putting new grout into a crack that keeps reappearing doesn’t last. If the floor needs to move there, the grout will crack again. Replacing that line with flexible sealant gives it somewhere to go. In an older home around Kenmore, damp from a failed joint can get into timber and plaster.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
Why choose Mr Mastic in Kenmore
- Rated 4.9 stars on Google
- A choice of colours where the product allows
- An ARBOMaster approved applicator
- We agree the colour with you first
Surface by surface
Concrete floor joints
Sawn joints in concrete floors control where it cracks. We reseal them with a floor-joint product suited to the traffic.
Skirting boards
Gaps between skirting and floor open as timber and floors move. We seal them with a flexible sealant rather than caulk painted or coloured to match.
Aftercare tips
Simple care keeps the joints in good condition. Our advice:
- Keep heavy wheels off new concrete joints until cured
- Do not paint over silicone
- Sweep along the edges of the floor
- Keep floor cleaning water to a minimum at the edges
Do not paint over silicone. If you plan to paint, we’ll use a paintable product.
Open skirting gaps let in draughts, dust and sometimes insects. Sealing it early keeps the room cleaner and stops it getting worse.
Nearby places to Kenmore
Also in Kenmore
New homes and floors in Kenmore
Across Perth and Kinross, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they do not all move the same way. The joint at the skirting or threshold has to allow for that. Many new homes in Scotland are timber-framed, and as the frame dries and settles, skirting and sealant joints can open up.
For jobs in and around Kenmore, choosing the right material for each joint is as important as a tidy finish.
Kenmore is about 24 miles north-west of Perth, in Perth and Kinross. Anywhere in PH15, we cover floor joint sealing for homes and businesses. Our Perth and Kinross coverage runs to 107 places, and Kenmore is one of them. Our Dundee page covers work nearby (40 miles or so).
Jobs for floor joint sealing in PH15 works the same way as everywhere else we cover. Local streets include The Square, Taymouth Drive and Pier Road, and we cover them all. If you’re just outside Kenmore, we cover Acharn (1 mile south-west), Fearnan (3 miles west), Boreland (4 miles west), Aberfeldy (6 miles north-east) and Little Ballinluig (9 miles north-east).
Near you in Kenmore
A little further out are Scottish Crannog Centre (0.5 miles south-west) and Taymouth Castle (within half a mile north). Open spaces near Kenmore include Drummond Hill.