Shetland Islands · Scotland
Camb Floor Joint Sealing
Specialist floor joint sealing for Camb: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Open gaps along the bottom of skirting boards
- Failed seals where bathroom floors meet baths and panels
- Caulk that has cracked where the floor moves
What we do, step by step
Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, carry out the job and tidy away. It normally takes a few hours for most rooms, longer for large commercial floors. Outside jobs in Camb need a dry day, because sealant will not bond to a wet joint, so an outdoor job can move if the forecast changes. Work indoors isn’t affected.
- First, the floor type, the gap and the traffic are checked.
- We remove what’s in the joint now.
- We vacuum out the joint and add backing where the depth needs setting.
- We apply the sealant in a colour that suits the floor.
- We tool it neatly and tell you when it can be walked on and cleaned.
How to prepare
- Move anything stored near the joints
- Let us know if you’ve seen damp or leaks
- Mention any sign-in or site rules at work premises
How to get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that’s easy.
Advice
Floor joint sealing in Camb
A threshold joint has to cope with feet, movement and sometimes water. We use a flexible product that suits both floors. If you are dealing with failed joint filler in concrete floors and floor edges that trap water and grime, we can put it right, whatever the surface.
Timber frame is common in newer Scottish homes, and it settles over the first years, which shows as gaps at skirtings and floor joints. Older stone-built homes, meanwhile, often have timber floors that move with the seasons.
All our work comes with a 12-month guarantee, wherever you are in the Shetland Islands.
- Place
- Camb (ZE2)
- Wider area
- Shetland Islands
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Also in Camb
What happens if it’s left?
Left open, concrete joints break down under traffic. Resealing it early protects the edges. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
The cost reflects the work involved, not guesswork. That is why we ask a few questions first.
Why us?
- We never seal over old sealant
- A sealant colour to suit the surroundings
- 12-month guarantee on every job
- Over 20 years’ experience
See our cost guide or customer reviews.
Keeping the joints in good condition
No joint lasts for ever, but care makes a real difference. A few tips:
- Cone off fresh joints until they’re ready
- Check skirting joints after the heating season
- Avoid sloshing water against skirting
- Avoid caulk in bathrooms and kitchens
Keep off the joint for the time we give you. Feet are usually fine before mopping or wheeled traffic so we will give you each time.
Concrete joints damaged by traffic get worse quickly. Early resealing helps keep the joint intact and the floor safer.
What affects the cost of floor joint sealing
Every job gets its own quote. These are the things that affect it:
- The number of rooms or windows
- Access and height
- How much old sealant there is and how hard it is to remove
- The number and length of the joints
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Ask us for a quote and we will explain what it covers.
Helping us quote
When you contact us, it’s useful to know:
- What’s wrong with the joints now
- Any access issues, like height or stairs
- The address or postcode of the job
- Whether it has been sealed before
Asking for a quote is easy: let us know what needs doing and where. Photos by email help us understand the job.
New homes and floors in Camb
Floors around the Shetland Islands run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. The joint at the skirting or threshold has to allow for that. Many new homes in Scotland are timber-framed, so skirting and sealant joints can open up as the building settles.
If you look after a church, hall or community building such as Reafirth Chapel, joints in its floors, skirtings and thresholds need resealing as they wear.
Camb is in the Shetland Islands. Whether you’re in the middle of Camb or further out, we cover floor joint sealing for every kind of property. Camb is one of 63 places in the Shetland Islands we cover for floor joint sealing.
All of ZE2 is within our area for floor joint sealing, from the main roads to the quietest streets. If you are just outside Camb, we cover Mid Yell (1 mile south), Aywick (4 miles south), Houbie (7 miles east), Cullivoe (7 miles north) and Clivocast (7 miles north-east). Remote and island addresses need a little more planning, so please mention your location when you drop us a line at info@mrmastic.co.uk.
Local landmarks in Camb
For a walk, there’s Sigla Water and White Hill of Vatsetter.
DIY versus a professional finish
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
When to call us in Camb
Timber floors and skirting shrink and swell through the year. In winter, with the heating on, timber dries and gaps open and they change again in summer.
Look out for these signs:
- Failed joint filler in concrete floors
- Floor edges that trap water and grime
- Grout used at the floor edge instead of sealant
- Open gaps along the bottom of skirting boards
Managing a site like Mid Yell Junior High School? Then entrance and corridor floor joints take a lot of traffic.
Comparing quotes
- What preparation is included
- How much experience the applicator has
- Which colour the sealant will be
- Which sealant they’ll use, and why
How the job changes by surface
Concrete floor joints
Concrete floors have sawn or formed joints to control cracking. We reseal them with a floor-joint product suited to the traffic.
Tiled floors
Tiled floors need movement joints at edges and across large areas. Where needed, a line of grout is replaced with flexible sealant.
FAQs for Camb
Is Camb in your area for floor joint sealing?
Yes, Camb is within the area we cover. Our work covers the whole of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job, and we will send you a clear quote.
Will you come out to Camb?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland, including the islands, where work is planned around ferry crossings. Let us know about access, parking and anything unusual about getting there when you book.
Will it make a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Can you use decorators’ caulk instead?
Caulk works on still, dry joints, but it splits where the joint moves or gets wet. For most floor joints, we use a flexible sealant.
How long does floor joint sealing take?
Most jobs take a morning or an afternoon for most homes, including preparation and clearing up. We will confirm how long when we quote.
Is it worth trying it myself?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs.
Can you seal where the floor meets the bath panel?
Yes. The old joint comes out and a flexible silicone replaces it in a colour to suit.
How long before the joint can take traffic?
You’ll get the times before we go. It depends on the sealant, and light foot traffic is usually fine before wet cleaning or wheels.