Isle of Wight · England
Shalcombe Fire Rated Sealant
Problem with your fire-stopping gaps in Shalcombe? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Linear gaps at the head of walls
- Fire stopping disturbed by later work
- Unsealed gaps around fire door frames
For landlords and businesses
If you manage several properties in or around Shalcombe, several properties can be quoted together. Just tell us the addresses and what each one needs, and photos by email help.
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
About our fire rated sealant in Shalcombe
Bigger jobs can be worked through in stages, flat by flat or floor by floor, noting the locations and products as we go. It gives you a list to keep with the building’s fire safety documents. We work on service penetrations, plasterboard & masonry and pipe & cable gaps, and the jobs we see most are gaps left after a refit or conversion and fire stopping disturbed by later work.
Somewhere as small as Shalcombe, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
Whatever the size of the job, you get the same 12-month guarantee in Shalcombe and across the Isle of Wight.
- Place
- Shalcombe (PO41)
- Wider area
- Isle of Wight
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
How to look after the new joints
Aftercare is simple, and it makes a real difference:
- Take photos of fire stopping before ceilings or boxing go back
- Report cracked or damaged seals as soon as you notice them
- Ask which product was used before you paint
- Store the list of sealed gaps with your building paperwork
Tell other trades that the gaps have been sealed, and ask them to reseal anything they cut through. A lot of damaged fire stopping comes from later work.
Any job that breaks through a wall or ceiling should include resealing. Doing it at the time avoids leaving gaps behind.
What happens on the day
On the day, there’s very little for you to do. Show us the job and we will take it from there. The job generally takes anything from a few hours to several days, depending on how many gaps there are. For a village or hamlet like Shalcombe, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your files.
Getting ready for the visit
- Clear the area around the work
- Tell us about access, such as stairs, a lift or high-level joints
- Mention if the joints have been sealed before
How to get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work and give you a clear price.
Advice
Quotes for fire rated sealant in Shalcombe
Some jobs are bigger than they look, and some smaller. What affects the quote:
- The old material and how stubborn it is
- The number and length of the joints
- Any mould that needs treating
- The number of rooms or windows
Combining jobs into one visit is usually more efficient than separate visits. You’ll get one clear quote for the whole job.
Helping us quote
To make quoting easier, please include:
- Any previous sealing or DIY work
- The rough size of the job
- The type of property
- The problem you’ve noticed
Getting a quote is simple: let us know the job and the location and its rough size. A few pictures by email make the job easier to understand, and we will come back to you with a quote.
Nearby places to Shalcombe
More services for Shalcombe
Can I do it myself?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Questions from Shalcombe
Is there a guarantee on fire rated sealant in Shalcombe?
Every job comes with our 12-month guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Do you cover Shalcombe for fire rated sealant?
Yes. Our work covers London and the South East, and Shalcombe is part of that. Just call 0345 464 0079 or send us an email with a few details of the job.
How long does the job take?
Most jobs take a few hours for a handful of gaps, and longer for a whole building. We’ll confirm how long when we quote.
Do I need to be at home?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
Do you provide details of the products used?
Yes. We note each location and the product that went in, so you have it on file.
Can you tell me how many minutes the seal will last?
That isn’t something we state or certify. Your specification sets the requirement, and we apply a product tested for it with a record of each location.
Will the old sealant be removed?
Always. Sealing over the old bead is the commonest cause of early failure, so we never do it.
Can new sealant go over the old?
No, it won’t last. It may look fine at first, but the new bead soon lifts. The old sealant has to come out completely.
Leave it or put it right?
Paying for fire stopping that has to be redone is a false economy. Work that doesn’t follow the tested detail may have to come out again once someone inspects it. Around Shalcombe, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Call for a quick quote and we’ll explain what it covers.
Why book with us
- Any old sealant cut out fully, not covered over
- Sanitary silicone with an anti-fungal additive in wet areas
- Neat joints and a tidy finish
- Arbo and Everbuild products
Read what affects the cost and our reviews.
Fire rated sealant around Shalcombe
For seaside hotels, guest houses and holiday lets around Shalcombe, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Around Shalcombe, as everywhere, fire rated sealant is only as good as the preparation behind it.
Shalcombe is about 6 miles west of Newport, in the Isle of Wight. Shalcombe gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. 125 places in the Isle of Wight are on our list. Southampton is on our list too, about 17 miles from Shalcombe.
Work in PO41 is quoted and booked the same way as anywhere else. We also cover Dunsbury (1 mile south-west), Hulverstone (1 mile south), Brook (1 mile south-west), Newbridge (1 mile north-east) and Wellow (1 mile north). We also work in nearby towns such as Newport (6 miles east), Ryde (13 miles east), Cowes (8 miles north-east), Sandown (12 miles east), Shanklin (12 miles east) and Ventnor (11 miles south-east). Island and remote addresses take a little more planning, so please mention your location when you call 0345 464 0079 or drop us an email.
Near you in Shalcombe
A little further out are Calbourne Water Mill And Rural Museum (1.3 miles north-east) and Yarmouth Castle (3.7 miles north-west). The countryside around Shalcombe includes Westover Down.
Do you need fire rated sealant in Shalcombe?
Gaps also open up as buildings move: a seal that cracks or pulls away leaves a path for smoke. Knocks, maintenance and building work damage it further.
Most people get in touch after spotting something like this:
- Open holes round services passing through fire walls
- Holes left by a change of layout
- Linear gaps at the head of walls
- Damaged fire sealant left by other trades
If you look after a church, hall or community building such as St. Mary's Church, service openings in its walls need the right fire-rated sealant, as in any building.
What to look for in a quote
- Whether you can choose the colour
- Whether the sealant suits the joint
- When the joint can take water or movement
- What preparation is included