Isle of Wight · England
Fire-rated sealant in Brook, Isle of Wight
Fire rated sealant for Brook, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Unsealed gaps where pipes and cables go through a wall
- Gaps flagged on a fire risk assessment
- Gaps left after a refit or conversion
FAQs for Brook
Can you do fire rated sealant in Brook?
Yes. We work across London and the South East, and Brook is part of that. You can call 0345 464 0079 or drop us an email and tell us what needs doing, and we’ll give you a clear quote.
Will you come out to Brook?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Will it make a mess?
We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.
Are you insured?
Yes. We’re fully insured, with over 20 years’ experience in sealant work.
Do you seal gaps around fire door frames?
Yes. The joint between frame and wall is sealed with a fire-rated sealant, to the product’s details. The door leaf and its hardware need a door specialist.
What sealant do you use?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.
Can I use normal mastic around a pipe through a fire wall?
No. It might close the gap, but it isn’t a fire-rated seal. A tested fire-rated product is needed.
Does someone need to be in?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
How we handle fire rated sealant in Brook
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. One new cable or pipe can leave a gap that nobody goes back to seal. Those are the gaps we close, using a tested fire-rated product. Typical jobs include unsealed gaps around fire door frames and standard silicone or caulk in a fire-stopping gap, across plasterboard & masonry, flats & HMOs and pipe & cable gaps.
In a village or hamlet like Brook, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. They all have washrooms, kitchens and service openings that need the right sealant.
We stand behind the work with a 12-month guarantee.
- Where
- Brook (PO30)
- Region
- Isle of Wight
- Guarantee
- One year on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Landlord and commercial work in Brook
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
Keeping the joints in good condition
Looking after new joints is easy, and it makes a real difference:
- Allow for resealing whenever new services are run
- Tell trades working in the building that fire seals must be put back
- Check risers, ceiling voids and cupboards during building checks
- File the fire-stopping record where your assessor can find it
Do not drill through or remove a fire seal without putting it back properly. If you need new services through a sealed wall, plan the fire stopping as part of the job.
Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes and the job gets bigger.
What we’re called out for in Brook
Buildings are refitted and reconfigured over the years. Conversions to flats and HMOs, and office refits, create new walls and new routes for services, with gaps to match.
Any of these means the joints need attention:
- Seals cut through by electricians, plumbers or data installers
- Door frames with gaps between frame and wall
- Gaps where walls meet ceilings or slabs
- Old fire sealant that has split or come away
In and around Brook, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Comparing quotes
- Whether the sealant suits the joint
- How much experience the applicator has
- How the joint is cleaned and prepared
- How long the guarantee is
What we do, step by step
On the day, we start by going over the job with you, so there are no surprises. Surfaces next to the work are protected before any work begins. The work generally takes a few hours for a handful of gaps, and longer for a whole building. Somewhere like Brook needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Where the tested detail needs backing or fill, we fit it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Finally, we list where we worked and what we used, for your records.
Preparing for the visit
- Mention any tricky access
- Let us know if you’ve seen damp or leaks
- For indoor joints, keep the area dry beforehand if you can
Get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that is easy.
Related advice
Also in Brook
Commercial buildings in Brook
If you run a hotel, guest house or holiday let in a coastal place like Brook, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you look after a church, hall or community building such as St. Mary's Church, older buildings that have had new heating or wiring often have service gaps worth checking.
Brook is about 7 miles south-west of Newport, in the Isle of Wight. Jobs in Brook get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Across the Isle of Wight, we cover 125 places, Brook among them. We also work in Southampton, about 19 miles from Brook.
Postcode districts we cover here for fire rated sealant: PO30. Streets in the area include Carpenters Lane and Coastguard Lane, all of which we cover. Other places close to Brook include Dunsbury (1 mile north), Brookgreen (1 mile south-east), Hulverstone (1 mile east), Shalcombe (1 mile north-east) and Chilton Green (2 miles south-east). Further out, we also cover Newport (7 miles north-east), Ryde (14 miles east), Cowes (10 miles north-east), Sandown (13 miles east), Shanklin (12 miles east) and Ventnor (11 miles east). For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.
Local landmarks in Brook
A little further out are Calbourne Water Mill And Rural Museum (2.5 miles north-east) and Yarmouth Castle (4.3 miles north-west). The countryside around Brook includes Westover Down.
Quotes for fire rated sealant in Brook
Every job gets its own quote. This is what makes a difference:
- How easy the joints are to reach
- When we can work, for business premises
- The size of the job
- How much old sealant there is and how hard it is to remove
What you pay reflects the work, not a rough estimate. That is why we ask about the job first and agree the price before starting.
What we need to know
To help us quote quickly, let us know:
- How many joints, rooms or windows are involved
- A few pictures by email, if you can
- Any previous sealing or DIY work
- Access, such as stairs, a lift or height
Every job is quoted individually, so the first step is telling us about yours. Just ring 0345 464 0079 or send us an email with the details and send photos if you have them.
What we cannot put right
Sealant isn’t the answer to every problem, and we’d rather say so up front. Sealant won’t put right:
- Sign-off of the building, which sits with building control or your assessor
- Walls or floors that weren’t built to resist fire
- Problems with the door itself rather than the gap around the frame
Not sure which it is? You can call 0345 464 0079 or send us an email and we will tell you honestly.
Surfaces we seal
- Linear gaps
- Pipe & cable gaps
- Flats & HMOs
- Door frames
- Plasterboard & masonry
- Service penetrations
How the job changes by surface
Service penetrations
Pipes, cables and ducts passing through fire-resisting walls and floors each leave a gap. The sealant is chosen for what passes through and how wide the gap is.
Plasterboard walls
We check that the board around the gap is sound. Loose material is removed so the sealant has a firm edge.