Isle of Wight · England
Fire Rated Sealant in Hulverstone
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Hulverstone, with a one-year guarantee on every job. Call for a quick quote.
- Linear gaps at the head of walls
- Standard silicone or caulk in a fire-stopping gap
- Sealant items on a fire risk assessment action list
Why act early in Hulverstone
An open gap in a fire-resisting wall is a route for smoke and fire. Sealing it properly restores what the wall was there to do, and the work involved is often modest. Where a wall is exposed, as many are in small places like Hulverstone, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are not sure whether it needs doing, phone 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.
What you get with us
- An ARBOMaster approved applicator
- A 12-month guarantee on all work
- We are fully insured
- 180+ five-star Google reviews
Read what affects the cost or what customers say.
About our fire rated sealant in Hulverstone
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. Measuring the gap and checking what it’s made of comes first, then apply it to the depth its tested detail calls for. If you have damaged fire sealant left by other trades and ordinary sealant used where a fire-rated product was needed, we can put it right, on linear gaps, service penetrations and door frames alike.
In a village or hamlet like Hulverstone, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. They all have washrooms, kitchens and service openings that need the right sealant.
The work is covered for a year after we finish. If anything isn’t right with it, phone 0345 464 0079 or email us.
- Where
- Hulverstone (PO30)
- Region
- Isle of Wight
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What fire rated sealant looks like in Hulverstone
For seaside hotels, guest houses and holiday lets around Hulverstone, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
Around Hulverstone, as everywhere, fire rated sealant is only as good as the preparation behind it.
Hulverstone is about 7 miles south-west of Newport, in the Isle of Wight. Every kind of property in Hulverstone is covered for fire rated sealant. The work is guaranteed for a year. Hulverstone is one of 125 places in the Isle of Wight we cover for fire rated sealant. We also work in Southampton, around 18 miles away.
All of PO30 is within our area for fire rated sealant, from the main roads to the quietest streets. We also cover the places around Hulverstone: Brookgreen (1 mile south-west), Brook (1 mile west), Dunsbury (1 mile north-west), Shalcombe (1 mile north) and Chilton Green (1 mile south-east). We also work in nearby towns such as Newport (7 miles north-east), Ryde (13 miles east), Cowes (9 miles north-east), Sandown (12 miles east), Shanklin (12 miles east) and Ventnor (11 miles east). If you are somewhere remote, a little more planning is needed, so let us know when you get in touch.
Around Hulverstone
Well-known places in the area include Brighstone Village Museum (2 miles east) and Yarmouth Castle (4.6 miles north-west). For a walk, there’s Westover Down.
Towns and villages near Hulverstone
Also in Hulverstone
When to call us in Hulverstone
Over time, buildings change layout and use. Conversions to flats and HMOs, and office refits, create new walls and new routes for services, with gaps to match.
Look out for these signs:
- Holes left by a change of layout
- Gaps flagged on a fire risk assessment
- Gaps around pipes and cables through fire-resisting walls
- Unsealed gaps around fire door frames
Community buildings like St. Mary's Church are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
Comparing quotes
- Whether the sealant suits the joint
- Whether they’re fully insured
- Which colour the sealant will be
- How the joint is cleaned and prepared
Honest limits
Some problems need a builder, plumber or other trade rather than us:
- Construction that does not provide fire resistance on its own
- Big openings where sealant alone is not the tested solution
- Doors that are not fire doors in the first place
If in doubt, call 0345 464 0079 or email us and we’ll say what we think before booking.
Surfaces we seal
- Pipe & cable gaps
- Flats & HMOs
- Service penetrations
- Plasterboard & masonry
- Door frames
- Linear gaps
Quotes for fire rated sealant in Hulverstone
Call for a quick quote. The main things that affect it are:
- How easy the joints are to reach
- Working hours on commercial sites
- How much there is to do
- How many rooms, windows or areas are involved
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs. Ask us for a quote and we will go through it with you.
Asking for a quote
To make quoting easier, let us know:
- A few photos by email, if you can
- The address or postcode of the job
- What’s wrong with the joints now
- Whether it has been sealed before
To get a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We’ll send you a clear quote before any work starts.
Work for landlords, hotels and businesses
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll give you a quote.
Different surfaces, different methods
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Crumbling edges are cleaned back before the sealant goes in.
Door frames
Behind most architraves is a gap between frame and wall. We seal any open gap to the product’s tested details so the architrave can be refitted.
How the visit works
A visit follows a simple pattern: we check the joints, protect the area around them, carry out the job and clear up. It normally takes anything from a few hours to several days, depending on how many gaps there are. Somewhere like Hulverstone needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- We put in whatever backing or fill the product detail specifies.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Before we arrive
- Try not to wet indoor joints just before the visit
- Let us know about stairs, lifts or work at height
- Let us know if you’ve seen damp or leaks
Ask for a quote
We don’t publish a price list, because every job is different. Instead, your job gets its own clear quote. To arrange one, ring 0345 464 0079 or send us an email.
Advice
FAQs for Hulverstone
Do you cover smaller places like Hulverstone?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
What guarantee comes with fire rated sealant in Hulverstone?
All our work, in Hulverstone and everywhere else, comes with a 12-month guarantee. We’re also fully insured and ARBOMaster approved.
Do you provide details of the products used?
Yes. When the job is done, we give you the locations and products. If you need pictures or a set layout, ask when you get a quote.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we will explain our choice.
Do you seal gaps around fire door frames?
Yes, if the gap is within the product’s tested range. We seal the frame-to-wall gap, not the door itself, and we will mention anything we notice about the door.
Is there any odour?
Sometimes, a little. Any smell clears as the sealant cures.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Do you work in flats, HMOs and commercial buildings?
Yes. Occupied flats, HMOs, offices and schools are all fine. Early starts or out-of-hours work can be arranged where it’s needed.