Glasgow · Scotland
Fire Rated Sealant in Scotstoun
Fire rated sealant across Scotstoun and nearby, with every bit of old sealant taken out first and a one-year guarantee.
- Holes left by a change of layout
- Standard silicone or caulk in a fire-stopping gap
- Gaps flagged on a fire risk assessment
Can I do it myself?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
About our fire rated sealant in Scotstoun
Until it’s heated, intumescent sealant behaves like an ordinary sealant; then it swells to help close the gap. Which product suits a gap depends on its width, the materials either side and what runs through it, so we follow the tested detail for each one. If you have standard silicone or caulk in a fire-stopping gap and gaps flagged on a fire risk assessment, we can help, on flats & HMOs, pipe & cable gaps and plasterboard & masonry alike.
In Scotland’s cities, hotels and student accommodation need sealant work done without emptying the building, so jobs in Scotstoun can be programmed room by room, with out-of-hours working possible to arrange.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Place
- Scotstoun (G14, G13, G51)
- Region
- Glasgow
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
How to look after the new joints
A little care helps the new joints last. We recommend:
- Ask which product was used before you paint
- Ask every contractor to reseal any fire stopping they disturb
- Look in service cupboards and ceiling voids from time to time
- Don’t fill fire-stopping gaps with ordinary foam or silicone
Avoid covering a sealed gap with anything that isn’t part of the tested detail. If it needs repair, use the same type of product. Ask us if you are not sure which product was used.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is usually a straightforward job.
When it isn’t the sealant
Before booking, it’s worth knowing the limits:
- Construction that doesn’t provide fire resistance on its own
- Assessing a building’s fire safety
- Openings too large for sealant, which need batts, boards or another system
If you are not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer.
Joints and surfaces we work on
- Pipe & cable gaps
- Plasterboard & masonry
- Service penetrations
- Linear gaps
- Door frames
- Flats & HMOs
When to call us in Scotstoun
Gaps around door frames are easily missed. The gap between the frame and the wall is hidden behind the architrave, so it can be left open when a door is replaced.
The problems people usually mention when they call are:
- Linear gaps at the head of walls
- Sealant items on a fire risk assessment action list
- Standard silicone or caulk in a fire-stopping gap
- Open holes round services passing through fire walls
For buildings such as Scotstoun East Church, older buildings that have had new heating or wiring often have service gaps worth checking.
Comparing quotes
- What the quote includes, VAT included or not
- Which sealant they’ll use, and why
- How long the guarantee is
- Who does the work, and how experienced they are
Why it’s worth doing now in Scotstoun
An open gap in a fire-resisting wall is a route for smoke and fire. A proper seal lets the wall do its job again, and the work involved is often modest. Scottish rain finds any gap around a frame or wall joint, and in a tall building in Scotstoun, damp can travel a long way before it shows.
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all make a difference.
What you get with us
- Over 20 years’ experience
- Trusted Arbo and Everbuild sealants
- Anti-fungal sanitary silicone in wet areas
- Approved under the ARBOMaster scheme
Read our cost guide and our reviews.
What fire rated sealant looks like in Scotstoun
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
Rented homes near Scotstounhill station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product. If you look after a building such as Scotstoun Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices.
Scotstoun is about 1 mile east of Renfrew, in Glasgow. We carry out fire rated sealant for homes and businesses in Scotstoun and nearby, as part of our work across Glasgow. Scotstoun is one of 183 towns and villages in Glasgow where we work.
Postcode districts we cover here for fire rated sealant: G14, G13 and G51. Whether your property is on Norse Road, Mitre Lane and Upland Road or a nearby road, we can help. Neighbouring places we cover for fire rated sealant include Jordanhill (1 mile north-east), Scotstounhill (1 mile north-west), Whiteinch (1 mile south-east), Garscadden (1 mile north-west) and Broomhill (1 mile east). Within a short drive, we also cover Glasgow (3 miles south-east), Woodlands (3 miles east), Woodside (3 miles east), North Kelvinside (3 miles east), Garnethill (3 miles east) and Anderston (3 miles east).
Around Scotstoun
We work in homes and buildings around Jordanhill College, St. Thomas Aquinas Secondary School and Victoria Park and the streets around them. Scotstoun’s nearest station is Scotstounhill station, roughly 0.5 miles north of the centre. A little further out are Southern General Hospital (1.1 miles south) and Renfrew Museum (1.5 miles west). The countryside around Scotstoun includes Kilmardinny and Castle Hill.
Towns and villages near Scotstoun
Other services in Scotstoun
Quotes for fire rated sealant in Scotstoun
Your quote is based on your job. We look at:
- How easy the joints are to reach
- Whether old sealant or filler has to be cut out
- How many rooms, windows or areas are involved
- Working hours on commercial sites
Combining jobs into one visit is normally more efficient than separate visits, so tell us about everything that needs sealing. We’ll give you a clear quote for the lot.
Helping us quote
When you contact us, it’s useful to know:
- Pictures of the joints, sent by email
- Whether it’s a home or a business
- How we’d reach the joints
- Where the property is
We quote each job on its own. Simply email us at info@mrmastic.co.uk and describe the job and send photos if you have them.
Questions from Scotstoun
Are the rules for fire-rated sealant different in Scotland?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Can you do fire rated sealant in Scotstoun?
Yes. We work across all of Scotland, and Scotstoun is part of that. Just send an email to info@mrmastic.co.uk with a few details of the job.
Will the old sealant be removed?
Yes, always, and completely. New sealant won’t bond properly to old, so the joint is cleaned back first.
Do you have insurance?
Yes. Mr Mastic is fully insured.
How long will you be here?
Most jobs take a few hours for a handful of gaps, and longer for a whole building, including preparation and clearing up. We’ll confirm how long when we quote.
Can you tell me how many minutes the seal will last?
We don’t certify fire stopping or quote ratings. Our part is installing the specified product to its tested details and list the locations and products for you.
Is it OK to seal over old sealant?
No. New silicone will not bond to old silicone, and anything trapped underneath, including mould and water, stays there. We remove it all first.
Can I add another job to the visit?
Yes, and it often makes sense. Doing several areas at once is generally more efficient, so mention them when you ask for a quote.
What happens on the day
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, do the work and clear up. It generally takes from a few hours to a few days, depending on the number of gaps and the access. Many homes in Scotland’s cities are tenement flats, reached through a shared close and up a common stair. For a job in Scotstoun, tell us the floor, how the door entry system works and where we can park nearby.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed and the gap cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products.
How to prepare
- Let us know about earlier repairs to the joints
- Clear the area around the work
- Keep pets and children clear of the area while we work
How to get a quote
Want a quote for fire rated sealant? Please send an email to info@mrmastic.co.uk and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.