Aberdeenshire · Scotland
Ruthven Fire Rated Sealant
Problem with your fire-stopping gaps in Ruthven? We cut out the old, prepare the joints and apply the right sealant.
- Open holes round services passing through fire walls
- Old fire sealant that has split or come away
- Sealant items on a fire risk assessment action list
Fire rated sealant in Ruthven, done properly
Landlords, managing agents and facilities teams use us for the sealant items on a fire risk assessment. Send us the list or the survey and we’ll quote for the fire-rated sealant work on it. We work on flats & HMOs, door frames and linear gaps, and people most often call us about ordinary sealant used where a fire-rated product was needed and gaps around pipes and cables through fire-resisting walls.
Commercial work around smaller Scottish places tends to mean hotels, guest houses, schools and halls rather than offices. All of them have washrooms, kitchens and fire-rated joints that need looking after.
Each job carries a 12-month guarantee, large or small.
- Place
- Ruthven (AB54)
- Region
- Aberdeenshire
- Guarantee
- 12 months on all our work
- Quote
- A clear price before work begins
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What fire rated sealant looks like in Ruthven
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details; we do not certify buildings or carry out fire risk assessments.
If you let a flat or house near Huntly station, any gap left by new services in shared walls should be closed with a fire-rated product.
Ruthven is about 13 miles south-east of Buckie, in Aberdeenshire. Ruthven gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Ruthven is one of 161 places in Aberdeenshire we cover. Aberdeen is on our list too, around 36 miles away.
Work in AB54 is quoted and booked the same way as anywhere else. If you are just outside Ruthven, we cover Cairnie (2 miles south-west), Milltown of Rothiemay (3 miles east), Huntly (5 miles south), Keith (5 miles north-west) and Newmill (6 miles north-west). Larger places within reach include Turriff (14 miles east), Banff (15 miles north-east), Portsoy (13 miles north), Insch (14 miles south-east), Aberchirder (8 miles north-east) and Whitehills (15 miles north-east). If you’re somewhere remote, the job takes a little more planning.
Landmarks near Ruthven
Ruthven’s nearest station is Huntly station, about 4.8 miles south of the centre. A little further out are Jubilee Hospital (4.8 miles south) and Daugh Castle (0.5 miles north). Not far away are The Bin.
Surface by surface
Door frames
A door can only do its job if the gap behind its frame is sealed too. We seal that gap with a fire-rated sealant suited to the frame and wall.
Service penetrations
New gaps tend to show up where services have been added. We clean out what’s there and reseal to the right depth with backing where the detail needs it.
What else we do in Ruthven
Questions from Ruthven
Is Ruthven within the area you cover?
Yes. Ruthven is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
I let a flat near Huntly station. Can you help?
Yes. We work for landlords and agents as well as householders. You can email us at info@mrmastic.co.uk with the details for a clear quote.
What fire rating will the seal have?
We don’t certify fire stopping or quote ratings. We apply the specified product to the manufacturer’s details and giving you a record of where it went.
Do you work in flats, HMOs and commercial buildings?
Yes, whether the building is a school, an office, flats or an HMO, and whether it’s in use or not. Let us know the building’s hours and we will plan the work to suit.
Can you seal over the old sealant?
No, and we never do. It may look fine at first, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Do you do fire sealant around door frames?
Yes. Gaps behind architraves are a common job for us. The door and its fittings are a separate job for a door specialist.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Which products do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Why it’s worth doing now in Ruthven
An unsealed gap lets smoke and fire get round a wall that was built to hold them back. A proper seal lets the wall do its job again, and the work involved is often modest. Around Ruthven, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
The cost depends on the size of the job, how much old material has to come out and access to the work. You will have a clear quote before any work starts, so you know where you stand.
Why Ruthven customers choose us
- 12-month guarantee on every job
- Full insurance on every job
- Approved under the ARBOMaster scheme
- Anti-fungal sanitary silicone in wet areas
Read what affects the cost or our reviews.
Common problems we fix in Ruthven
Sometimes the wrong product was used from the start: ordinary expanding foam, standard silicone or decorators’ caulk where a fire-rated seal was needed. It may look fine, but it is not a fire-rated seal.
Keep an eye out for any of the following:
- Unsealed gaps where pipes and cables go through a wall
- Cracked or shrunken fire-rated sealant
- Ordinary sealant used where a fire-rated product was needed
- Seals cut through by electricians, plumbers or data installers
Community buildings like Old Parish Church and Burial-Ground are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
What your quote should include
- How the surfaces are prepared before sealing
- What the cure time is
- Whether you can choose the colour
- Whether they seal over old material or remove it
Can I do it myself?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
The process
Once we are on site, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. Most jobs then take anything from a few hours to several days, depending on how many gaps there are. For a place like Ruthven, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Any non-fire-rated filler is removed and the gap cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- We hand over a list of locations and products.
Preparing for the visit
- Mention any tricky access
- Mention if the joints have been sealed before
- Mention any parking rules near the property
Get a quote
For fire rated sealant in Ruthven, send an email to info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and you will get a clear quote before work begins.
Read more
When it is not the sealant
We’ll always be straight with you, so here’s what sealant can’t fix:
- Big openings where sealant alone is not the tested solution
- Doors that are not fire doors in the first place
- Assessing a building’s fire safety
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly.
What we seal
- Pipe & cable gaps
- Plasterboard & masonry
- Service penetrations
- Flats & HMOs
- Door frames
- Linear gaps
How we quote for fire rated sealant
You will get a clear quote before work begins. It’s based on:
- How easy the joints are to reach
- When we can work, for business premises
- Any mould that needs treating
- How many rooms, windows or areas are involved
Leaving a failed joint generally makes the job bigger, not smaller, as water and mould keep getting in. If you are not sure whether it needs doing, email us at info@mrmastic.co.uk and we will give you an honest view and a quote.
Asking for a quote
When you call or email, it’s useful to know:
- A few photos by email, if you can
- Any previous sealing or DIY work
- What the problem is, such as mould, gaps, leaks or cracking
- Whether it’s a home or a business
There’s no standard price list. Instead, we send you a clear quote for your job. To get started, send an email to info@mrmastic.co.uk.