Aberdeenshire · Scotland
Portsoy Fire Rated Sealant
Fire rated sealant for Portsoy, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Cracked or shrunken fire-rated sealant
- Unsealed gaps around fire door frames
- Damaged fire sealant left by other trades
Different surfaces, different methods
Masonry and concrete
Holes through concrete and block are rarely neat. We measure the gap at its widest point to make sure it suits the product.
Service penetrations
New gaps tend to show up where services have been added. Old or unsuitable filler comes out before the right sealant goes in with backing where the detail needs it.
About our fire rated sealant in Portsoy
A fire seal relies on being installed the way it was tested: correct depth, correct backing and a product suited to the surfaces. That’s the part we focus on, gap by gap. If you’re dealing with standard silicone or caulk in a fire-stopping gap and fire seals that have cracked with movement, we can help, whatever the surface.
For a place like Portsoy, the journey and timings are planned in advance, so the job can fit around guests, residents or opening hours where possible.
Every job is covered by our one-year guarantee, wherever you are in Aberdeenshire.
- Place
- Portsoy (AB45)
- Region
- Aberdeenshire
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What fire rated sealant looks like in Portsoy
For seaside hotels, guest houses and holiday lets around Portsoy, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details; we do not certify buildings or carry out fire risk assessments.
In and around Portsoy, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint. For buildings such as St John's Episcopal Church, older buildings that have had new heating or wiring often have service gaps worth checking.
Portsoy is about 10 miles east of Buckie, in Aberdeenshire. Wherever you are in the AB45 postcode area, our applicators can take on fire rated sealant. Our Aberdeenshire coverage runs to 161 places, Portsoy among them. Aberdeen is on our list too, around 42 miles away.
Here we cover the AB45 postcode area for fire rated sealant. Streets in the area include South High Street, North High Street and Main Street. Portsoy is on the A98 and B9019, which makes it straightforward to reach with everything needed for fire rated sealant. Other places close to Portsoy include Sandend (2 miles west), Fordyce (2 miles south-west), Boyndie (4 miles south-east), Ladysbridge (4 miles east) and Whitehills (4 miles east). Larger places within reach include Turriff (13 miles south-east), Banff (6 miles east), Macduff (7 miles east), Aberchirder (9 miles south) and Gardenstown (13 miles east). Remote and island addresses need a little more planning, so please mention your location when you drop us a line at info@mrmastic.co.uk.
Local landmarks in Portsoy
Nearby you’ll also find Boyne Castle (1.5 miles east) and Campbell Hospital (under half a mile west). The countryside around Portsoy includes Durn Hill.
What we do, step by step
You don’t need to clear the whole room or building, just the space around the work. Everything nearby is protected, and the job takes from a few hours to a few days, depending on the number of gaps and the access in most cases. In smaller Scottish places, parking is usually less of an issue than access and distance. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products.
Getting ready for the visit
- Let us know about earlier repairs to the joints
- Keep children and pets away from the work area
- Mention any sign-in or site rules at work premises
Getting a quote
To get a quote, send an email to info@mrmastic.co.uk with the location and a short description of the problem. We’ll give you a clear quote before any work starts.
Read more
Why act early in Portsoy
Items left open on a fire risk assessment tend to come back at the next review. Having them sealed and recorded now means you can show the action was taken. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
What you pay reflects the work, not guesswork. That’s why we ask about the job first.
Why Portsoy customers choose us
- Domestic, commercial and hotel work
- Old sealant always removed completely
- Fully insured
- 20+ years of sealant experience
Take a look at our cost guide and what customers say.
When something else is needed
In fairness, there are a few things sealant won’t fix:
- Assessing a building’s fire safety
- Issuing a fire rating or certificate for a building
- Walls or floors that weren’t built to resist fire
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we will tell you honestly.
Where we work in Portsoy
- Door frames
- Flats & HMOs
- Plasterboard & masonry
- Service penetrations
- Linear gaps
- Pipe & cable gaps
Looking after it afterwards
A little care helps the new joints last. We recommend:
- Check whether a sealant can be painted before decorating over it
- Report cracked or damaged seals as soon as you notice them
- Plan fire stopping into any work that goes through walls or floors
- Keep photos of seals that will be hidden
Include fire stopping in your regular building checks. Look for cracks, gaps or sealant that has been cut or pulled out and have them put right.
Any job that breaks through a wall or ceiling should include resealing. Catching it then saves a separate visit later.
Common questions in Portsoy
Is Portsoy in your area for fire rated sealant?
Yes, Portsoy is within the area we cover. Our work covers the whole of Scotland. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing, and we’ll send you a clear quote.
Do you cover smaller places like Portsoy?
Yes, we do. We work across all of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you remove the old sealant?
Always. Sealing over old sealant is the main reason resealing fails early, so we never do it.
Can I choose the sealant colour?
We will suggest a colour to suit the surroundings, from white and clear to greys and other shades. The product needed can limit the range.
Is standard sealant good enough for a fire gap?
No. It looks sealed but won’t perform as fire stopping. A tested fire-rated product is needed.
Are you insured?
Yes. We are fully insured, and we can confirm the details when we quote.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How long does the job take?
It depends on the size of the job, but as a guide it takes anything from a few hours to several days, depending on how many gaps there are. We’ll give you a better idea when we quote.
Landlord and commercial work in Portsoy
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.
How we quote for fire rated sealant
We quote each job individually. These are the things that affect it:
- Access and height
- The product the joint needs
- The size of the job
- Any working-time requirements on site
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference.
What we need to know
To help us quote quickly, please include:
- Whether it’s a home or a business
- How we’d reach the joints
- What the problem is, such as mould, gaps, leaks or cracking
- A few photos by email, if you can
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.