Dumfries and Galloway · Scotland
Portpatrick Fire Rated Sealant
We cover Portpatrick for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Damaged fire sealant left by other trades
- Unsealed gaps where pipes and cables go through a wall
- Unsealed gaps around fire door frames
How we handle fire rated sealant in Portpatrick
Deciding which gaps need fire stopping isn’t our role; that comes from your fire risk assessor, designer or building control. Our part is applying the specified sealant carefully, to the right depth and with the right backing. We work on flats & HMOs, linear gaps and plasterboard & masonry, and the jobs we see most are gaps around pipes and cables through fire-resisting walls and door frames with gaps between frame and wall.
For a place like Portpatrick, the journey and timings are planned in advance, so it can be fitted around bookings or opening times where possible.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Location
- Portpatrick (DG9)
- Region
- Dumfries and Galloway
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
How the job changes by surface
Linear gaps
Long, narrow gaps appear where walls meet slabs and ceilings. They’re sealed with a fire-rated sealant over backing where the detail calls for it.
Masonry and concrete
Holes through concrete and block are rarely neat. We measure the gap at its widest point to make sure it suits the product.
How we quote for fire rated sealant
There’s no set price list, because no two jobs are the same. The quote depends on:
- The size of the job
- The type of sealant required
- Any working-time requirements on site
- How easy the joints are to reach
We do not show prices on the website, because the cost depends so much on the job itself. For a quick quote, please send an email to info@mrmastic.co.uk.
Asking for a quote
You do not need to know the technical terms. It helps if you can tell us:
- Any previous sealing or DIY work
- Access, such as stairs, a lift or height
- Photos by email, if that is easy
- The type of property
If you’re in Portpatrick and need fire rated sealant, send an email to info@mrmastic.co.uk. Tell us what the problem is and where, and we will agree the price before any work begins.
When something else is needed
It helps to know what we can’t do too:
- Big openings where sealant alone is not the tested solution
- Issuing a fire rating or certificate for a building
- A wall that isn’t a fire-resisting element to begin with
Not sure which it is? You can send an email to info@mrmastic.co.uk and we’ll tell you honestly before you book.
Where we work in Portpatrick
- Linear gaps
- Door frames
- Pipe & cable gaps
- Service penetrations
- Flats & HMOs
- Plasterboard & masonry
How to look after the new joints
No joint lasts for ever, but care makes a real difference. A few tips:
- Store the list of sealed gaps with your building paperwork
- Ask which product was used before you paint
- Look in service cupboards and ceiling voids from time to time
- Tell trades working in the building that fire seals must be put back
Avoid covering a sealed gap with anything that is not part of the tested detail. If it needs repair, use the same type of product. Ask us if you’re not sure which product was used.
It’s easiest to seal gaps while they’re few and easy to reach. Leave them and each new job adds another hole.
Work for landlords, hotels and businesses
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
Landlords and agents in Portpatrick can book us as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order.
Fire rated sealant in Portpatrick: local notes
If you run a hotel, guest house or holiday let in a coastal place like Portpatrick, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details, though we don’t certify buildings or do fire risk assessments.
In and around Portpatrick, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint. Whether the job is in Portpatrick itself or nearby, the right material for each joint matters as much as a neat finish.
Portpatrick is about 5 miles south-west of Stranraer, in Dumfries and Galloway. Jobs in Portpatrick get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. We cover 138 towns and villages across Dumfries and Galloway, from the larger towns to small villages. We also work in Glasgow, about 77 miles from Portpatrick.
Jobs for fire rated sealant in DG9 works the same way as everywhere else we cover. If you need fire rated sealant at a property on Main Street, Dinvin Street and St Patrick Street or anywhere close by, we can help. Neighbouring places we cover for fire rated sealant include Lochans (4 miles north-east), Stranraer (5 miles north-east), Stoneykirk (6 miles east), Leswalt (6 miles north) and Lime Kiln (6 miles north-east).
What’s near Portpatrick
Well-known places in the area include Galloway Community Hospital (5.4 miles north-east). Green spaces nearby include Old Loch.
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
More services for Portpatrick
Your questions about fire rated sealant in Portpatrick
Do you cover smaller places like Portpatrick?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
Do you cover Portpatrick for fire rated sealant?
Yes. We work across all of Scotland, and Portpatrick is part of that. Just drop us a line at info@mrmastic.co.uk with a few details of the job.
Do the sealants smell?
Possibly a little. Any smell clears as the sealant cures, and ventilation helps.
Does someone need to be in?
It depends on the job. Inside work needs someone to give us access.
What sealant do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Will you assess my building’s fire safety?
No. We work from the specification you give us, and apply each product to its tested details.
Do you work in flats, HMOs and commercial buildings?
Yes. We regularly work in flats, HMOs, schools and offices while they’re in use, with access planned around residents or staff. Out-of-hours work can be arranged.
Do you provide details of the products used?
Yes. When the job is done, we give you the locations and products. If you need pictures or a set layout, ask when you get a quote.
The process
On the day, we look over the joints with you first. Surfaces next to the work are protected before we start. Most jobs take anything from a few hours to several days, depending on how many gaps there are. Somewhere like Portpatrick may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out and the faces cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used.
Preparing for the visit
- Let us know about earlier repairs to the joints
- Try not to wet indoor joints just before the visit
- For business premises, tell us about site rules or sign-in
Ask for a quote
Every job is quoted individually, so the first step is telling us about yours. Simply email us at info@mrmastic.co.uk and describe the job.