Surrey · England

Fire Rated Sealant in Old Dean

Our applicators work in Old Dean on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly.

  • Ordinary sealant used where a fire-rated product was needed
  • Gaps flagged on a fire risk assessment
  • Unsealed gaps around fire door frames

Need fire rated sealant in Old Dean?

Fire rated sealant in Old Dean, done properly

Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. One new cable or pipe can leave a gap that nobody goes back to seal. Those are the gaps we close, using a tested fire-rated product. We work on pipe & cable gaps, linear gaps and flats & HMOs, and the jobs we see most are new service routes left unsealed after building work and standard silicone or caulk in a fire-stopping gap.

In a smaller place like Old Dean, commercial jobs tend to be smaller buildings: a pub, a surgery, a school, a shop or a few business units. Each needs the same care with its sealant as any larger building.

Every job comes with a one-year guarantee, wherever you are in Surrey.

Where
Old Dean (GU15, GU19)
Region
Surrey
Cover
12 months on all our work
Price
A clear quote up front
Telephone
0345 464 0079
Last updated
26 October 2026
Eleven members of the Mr Mastic team standing in front of branded white vans

Why it’s worth doing now in Old Dean

For some gaps, sealant isn’t the right answer and another system is needed. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. We will say so if a gap needs something other than sealant. In an older home around Old Dean, damp from a failed joint can get into timber and plaster, and that’s a much bigger job than renewing the sealant.

There are no prices on our website, because each job is priced on what it involves. For a quick quote, please call 0345 464 0079 or email us.

What you get with us

  • Fully insured
  • Approved under the ARBOMaster scheme
  • Old sealant always removed completely
  • Arbo and Everbuild products

Take a look at how sealant jobs are priced and our reviews.

Keeping the joints in good condition

Aftercare is simple:

  • Allow for resealing whenever new services are run
  • Report cracked or damaged seals as soon as you notice them
  • Do not paint over fire sealant until it has cured
  • Include hidden areas like risers in routine checks

Do not add foam, filler or ordinary sealant over a fire seal. If it needs repair, use the same type of product. We can tell you which product we used.

Any job that breaks through a wall or ceiling should include resealing. Doing it at the time avoids leaving gaps behind.

When to call us in Old Dean

If the sealant is too shallow, has the wrong backing or sits on a dusty surface, it isn’t installed as tested. Rushed fire stopping is common.

The problems people generally mention when they call are:

  • Old fire sealant that has split or come away
  • Joints picked up in a fire-stopping survey
  • Ordinary sealant used where a fire-rated product was needed
  • Linear gaps at the head of walls

If you look after a church, hall or community building such as St Martin's Church, service openings in its walls need the right fire-rated sealant, as in any building.

Questions to ask before you book

  • How the joint is cleaned and prepared
  • How long the guarantee is
  • What the quote includes, VAT included or not
  • What insurance they hold

How to choose a mastic man

Fire rated sealant in Old Dean: local notes

Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.

Rented homes near Camberley station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Schools such as Collingwood College are buildings too, and gaps opened by contractors for new cabling are a common finding in schools and offices.

Old Dean is about 1 mile north-east of Camberley, in Surrey. Anywhere in GU15, we can carry out fire rated sealant at your property. Across Surrey, we cover 395 places, and Old Dean is one of them. Our Reading page covers work nearby.

All of GU15 and GU19 is within our area for fire rated sealant. You will find streets such as Esher Road, Gibbet Lane and Sutton Road. Close by, we work in Camberley (1 mile south-west), York Town (2 miles south-west), Frimley (3 miles south), College Town (3 miles west) and Watchmoor (3 miles south-west). Further out, we also cover Guildford (9 miles south-east), Woking (7 miles east), Farnham (10 miles south), Egham (9 miles north-east), Walton-on-Thames (14 miles east) and Staines-upon-Thames (11 miles north-east).

Near you in Old Dean

We work in homes and buildings around Pine Ridge Infant School, Poors Allotment and Jolly Farmer pub and the streets around them. The nearest railway station is Camberley station, roughly 1.5 miles south-west of the centre. Other landmarks nearby include Frimley Park Hospital (2.4 miles south-west) and Surrey Heath Museum (1.4 miles south-west). The countryside around Old Dean includes Heath Lake and Wildmoor Heath.

Map of Old Dean © OpenStreetMap contributors

When it isn’t the sealant

We won’t take on work that won’t last, so here’s what sealant can’t put right:

  • Construction that doesn’t provide fire resistance on its own
  • Deciding what fire stopping a building needs
  • Big openings where sealant alone is not the tested solution

Not sure which it is? You can call 0345 464 0079 or email us and we will tell you honestly before booking.

Where we work in Old Dean

  • Flats & HMOs
  • Plasterboard & masonry
  • Pipe & cable gaps
  • Service penetrations
  • Linear gaps
  • Door frames

Quotes for fire rated sealant in Old Dean

There’s no set price list, because jobs vary so much. The quote depends on:

  • Whether there’s mould to deal with
  • The product the joint needs
  • Whether the work is at height
  • When we can work, for business premises

Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs, plus any working-time requirements on site. Ask us for a quote and we will go through it with you.

Asking for a quote

What to tell us when you ask for a quote:

  • How many joints, rooms or windows are involved
  • Photos by email, if that’s easy
  • The address or postcode of the job
  • Any previous sealing or DIY work

Getting a quote is simple: let us know the job and the location and its rough size. A few photos by email make the job easier to understand, and we’ll take it from there.

How the visit works

Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, do the work and tidy away. It generally takes anything from a few hours to several days, depending on how many gaps there are. In a smaller place like Old Dean, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.

  1. Before starting, we go through the specification or action list with you.
  2. Each gap is measured and its substrate and service noted.
  3. Unsuitable material such as ordinary foam or silicone is cut out and the faces cleaned.
  4. The specified fire-rated sealant goes in over any backing its detail requires.
  5. Every location is recorded with the product used for your records.

Before we arrive

  • Where the joints are inside, avoid wetting them before we arrive
  • Move anything stored near the joints
  • On commercial sites, let us know about site rules

How to get a quote

Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work.

Ask for a quote

Advice

FAQs for Old Dean

I let a flat near Camberley station. Can you help?

Yes. We work for letting agents and landlords as well as householders. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear price.

Do you cover Old Dean for fire rated sealant?

Yes. We work across London and the South East, and Old Dean is part of that. Just call 0345 464 0079 or drop us an email with a few details of the job, and we’ll give you a clear quote.

Will you leave a mess?

Tidy work is part of the job. We protect what’s around the joints, and we clear up when we’re done.

Can you tell me which gaps need fire stopping?

No. Your fire risk assessor, designer or building control decides that. We apply fire-rated sealant to the requirements they set.

What fire rating will the seal have?

Ratings and certificates are not something we issue. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves.

Do I need to be at home?

If the work is inside, we need someone to let us in. After that, you can carry on with your day.

Is intumescent sealant the same as fire-rated sealant?

Intumescent describes a material that swells in heat. Intumescent sealants are a type of fire-rated sealant, and the choice depends on the gap.

Are you insured?

Yes. We are fully insured.

For landlords and businesses

Housing providers, facilities teams and property managers book us too in Old Dean and across Surrey. We can quote a run of properties together, and we are fully insured for the work.

Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job