Surrey · England
Frimley Fire Rated Sealant
Specialist fire rated sealant for Frimley: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Gaps around pipes and cables through fire-resisting walls
- Fire stopping disturbed by later work
- New service routes left unsealed after building work
Fire rated sealant in Frimley
We don’t assess buildings or decide what fire stopping is needed; that comes from your fire risk assessor, designer or building control. Our part is applying the specified sealant carefully, to the right depth and with the right backing. Typical jobs include gaps where walls meet ceilings or slabs and ordinary sealant used where a fire-rated product was needed, across pipe & cable gaps, linear gaps and plasterboard & masonry.
Washrooms in busy buildings wear their sealant out faster than a bathroom at home, and fire-rated joints need restoring whenever new services are run through a wall. In Frimley, timings are planned around the building.
You’re covered for a year from the day we finish. If anything isn’t right with it, call 0345 464 0079 or email us.
- Place
- Frimley (GU16, GU15)
- Wider area
- Surrey
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
What we do, step by step
Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, do the work and clear up. It usually takes from a few hours to a few days, depending on the number of gaps and the access. For a job in Frimley, we need access to where the work is and somewhere nearby to park. If the job is outside, mention gates, side access and anything above ground floor.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed and the faces cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- We hand over a list of locations and products.
Preparing for the visit
- Keep children and pets away from the work area
- For business premises, tell us about site rules or sign-in
- Mention any parking rules near the property
Ask for a quote
For fire rated sealant in Frimley, phone 0345 464 0079 or email us. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Advice
What happens if it’s left?
Fire-rated sealants are less forgiving than ordinary ones. Depth, backing and surface preparation all affect how a seal performs, and we work to the product details every time. Draughts from a gap round a frame, damp under a sill or water behind a bath panel all start small, and early is when they’re cheapest and quickest to sort.
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all play a part, and we’ll explain the quote if you ask.
Why Frimley clients choose us
- Anti-fungal sanitary silicone in wet areas
- Fully insured
- Trusted Arbo and Everbuild sealants
- Domestic, commercial and hotel work
See what affects the cost and our reviews.
Honest limits
New sealant can’t fix everything, and we’d rather say so up front. It won’t solve:
- A wall that is not a fire-resisting element to begin with
- Fire doors that need new seals, closers or hardware
- Sign-off of the building, which sits with building control or your assessor
If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think.
Joints and surfaces we work on
- Plasterboard & masonry
- Door frames
- Linear gaps
- Pipe & cable gaps
- Flats & HMOs
- Service penetrations
Keeping the joints in good condition
Simple care keeps the joints in good condition. We recommend:
- Make resealing part of every contractor’s brief
- Get damaged fire seals looked at promptly
- Never patch a fire seal with standard sealant
- Include fire stopping when you schedule refits
Include fire stopping in your regular building checks. Look for cracks, gaps or sealant that has been cut or pulled out and have them put right.
Any job that breaks through a wall or ceiling should include resealing. Doing it at the time avoids leaving gaps behind.
Commercial buildings in Frimley
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
For landlords with property near Frimley station, any gap left by new services in shared walls should be closed with a fire-rated product. If you look after a church, hall or community building such as St. Peter's Church, service openings in its walls need the right fire-rated sealant, as in any building. If you look after a building such as Lakeside Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices.
Frimley is about 1 mile south of Camberley, in Surrey. Frimley gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Our Surrey coverage runs to 395 places, Frimley among them. Our Reading page covers work nearby.
Work in GU16 and GU15 works the same way as everywhere else we cover. Fire rated sealant is available to properties on Church Road, Frimley High Street and Station Road. Being close to the A325 and B311, Frimley is simple for us to get to. We also cover Frimley Green (1 mile south), Deepcut (1 mile east), Camberley (1 mile north), Watchmoor (2 miles north-west) and York Town (2 miles north-west). We also work in nearby towns such as Guildford (8 miles south-east), Woking (7 miles east), Farnham (8 miles south), Egham (11 miles north-east), Walton-on-Thames (15 miles east) and Staines-upon-Thames (13 miles north-east).
Local landmarks in Frimley
Locally, jobs take us to homes and businesses close to Tomlinscote School, The White Hart Public House and Frimley Lodge Park and the streets around them. The closest station to Frimley is Frimley station, roughly 0.7 miles west of the centre. Well-known places in the area include Frimley Park Hospital (0.6 miles north-west) and Surrey Heath Museum (1.9 miles north). The countryside around Frimley includes Danger Hill and Wildmoor Heath.
DIY sealant or a professional job?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
What affects the quote in Frimley
Some jobs are bigger than they look, and some smaller. The main factors:
- Mould in or behind the old joints
- Whether the work is at height
- How much old sealant there is and how hard it is to remove
- How many areas need sealing
What you pay reflects the work, not guesswork. That is why we ask about the job first.
What we need to know
You don’t need to know the technical terms. It helps if you can tell us:
- Roughly how big the job is
- The problem you’ve noticed
- Whether it has been sealed before
- Pictures of the joints, sent by email
For a quote, ring 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We’ll send you a clear quote before any work starts.
Also in Frimley
Work for landlords, hotels and businesses
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will quote.
Questions from Frimley
Is there a guarantee on fire rated sealant in Frimley?
Every job comes with our one-year guarantee, wherever it is. We are fully insured, and an ARBOMaster approved applicator.
Can you help a landlord with a rental near Frimley station?
Yes, we work for letting agents and landlords. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear quote.
What information do you need?
Let us know what needs doing and where. If we need more, we will ask.
Can you tell me which gaps need fire stopping?
No, we do not assess buildings. When your assessor or designer has set out what’s needed, we’ll quote for the sealant work on it.
Do the sealants smell?
It depends on the product. Some products have a noticeable smell, others very little.
What’s the difference between intumescent and fire-rated sealant?
Intumescent means it swells when heated to help seal the gap. It’s one type of fire-rated sealant; the right one depends on the gap and what passes through it.
Can new sealant go over the old?
No. New silicone will not bond to old silicone, and it traps any mould or water underneath. It all has to come out first.
Do you remove the old sealant?
Yes, every time. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.