Aberdeenshire · Scotland
Methlick Fire Rated Sealant
Professional fire rated sealant in and around Methlick, with every bit of old sealant taken out first.
- Gaps filled with a product that isn’t fire-rated
- New service routes left unsealed after building work
- Door frames with gaps between frame and wall
What happens if it’s left?
Waiting for the next refit can leave a gap open for years. On its own, sealing it now is a small job. Exposed walls in smaller Scottish places take a lot of wind and rain, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
The cost reflects the work involved, not a rough estimate. That’s why we ask a few questions first and send you a clear quote before we start.
Why book with us
- Anti-fungal sanitary silicone in wet areas
- We leave the area clean and tidy
- Over 20 years’ experience
- 4.9 on Google from 180+ five-star reviews
Read what affects the cost or what customers say.
Fire rated sealant in Methlick
Bigger jobs can be worked through in stages, flat by flat or floor by floor, with each location and product recorded. It gives you a list to keep with the building’s fire safety documents. If you’re dealing with gaps where walls meet ceilings or slabs and open holes round services passing through fire walls, we can put it right, whatever the surface.
For holiday lets, guest houses and community buildings in or near Methlick, the washrooms and kitchens need the same care as any city building, and fire-rated joints should be kept in good order.
Our work is backed for twelve months.
- Where
- Methlick (AB41)
- Region
- Aberdeenshire
- Guarantee
- One year on every job
- Quotes
- A clear price before work begins
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Aftercare tips
A little care helps the new joints last. We recommend:
- Get damaged fire seals looked at promptly
- Check risers, ceiling voids and cupboards during building checks
- Store the list of sealed gaps with your building paperwork
- Allow for resealing whenever new services are run
Any fire seal that is cut or drilled needs resealing to its tested detail. New services through a sealed wall should include fire stopping in the plan.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is usually a straightforward job.
When it is not the sealant
In fairness, there are a few things sealant will not fix:
- Large holes that need a different fire-stopping system
- A wall that isn’t a fire-resisting element to begin with
- Assessing a building’s fire safety
If you’re not sure, just drop us a line at info@mrmastic.co.uk and we will give you a straight answer before booking.
Joints and surfaces we work on
- Pipe & cable gaps
- Flats & HMOs
- Linear gaps
- Service penetrations
- Plasterboard & masonry
- Door frames
Fire rated sealant around Methlick
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. We install fire-rated sealant to the product’s tested details; we do not certify buildings or carry out fire risk assessments.
Community buildings like Methlick Parish Church are part of the picture too: gaps around pipes and cables are worth checking after any building work there. In and around Methlick, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Methlick is about 11 miles north-east of Inverurie, in Aberdeenshire. Every kind of property in Methlick is covered for fire rated sealant. Every job comes with our 12-month guarantee. Methlick is one of 161 places in Aberdeenshire where we work. We also work in Aberdeen, around 19 miles away.
All of AB41 is within our area for fire rated sealant. That includes homes and businesses on Gordon Crescent, Manse Road and Mansefield. We also cover Tarves (4 miles south), St Katherines (5 miles west), Auchnagatt (5 miles north-east), Fyvie (6 miles west) and Turfhill (6 miles north). We also work in nearby towns such as Inverurie (11 miles south-west), Ellon (7 miles south-east), Turriff (11 miles north-west), Garioch (11 miles south-west), Kemnay (15 miles south-west) and Kintore (14 miles south).
Around Methlick
Well-known places in the area include Gight Castle (2.4 miles north-west) and Old School Museum (3.7 miles south). Not far away are Upper Lake.
Landlords, agents and businesses in Methlick
We work for landlords and letting agents as well as householders. Sealant work between tenants is a simple way to keep a property in good order.
Hotels need rooms back in use, so we plan the work room by room. We’ve worked in hotels as well as homes and businesses.
Different surfaces, different methods
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. We seal them to the tested detail, with backing where it’s needed.
Service penetrations
A copper pipe, a cable and a plastic pipe can all need different fire-stopping details. We follow the manufacturer’s tested detail for each and we flag any that need another system.
Nearby places to Methlick
What else we do in Methlick
Your questions about fire rated sealant in Methlick
Will you come out to Methlick?
Yes, Methlick is covered. We work across all of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
How do Scotland’s building regulations apply to fire-rated sealant in Methlick?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We don’t certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Will it make a mess?
Tidy work is part of the job. Nearby surfaces are protected, and the area is left clean when we finish.
What sealant do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Can new sealant go over the old?
No, and we never do. It can look neat for a few weeks, but the new layer lifts away from the old one. The old sealant has to come out completely.
Can you give us a record of the work?
Yes. You get a list of where we worked and what we used to keep with your fire safety documents.
How long will you be here?
It depends on the size of the job, but as a guide it takes from a few hours to a few days, depending on the number of gaps and the access. We will give you a better idea when we quote.
Do you do fire sealant around door frames?
Yes. We seal the gap between the frame and the wall with a suitable fire-rated product. The door, its seals and closer are for a door specialist.
Quotes for fire rated sealant in Methlick
The quote reflects the job in front of us. We take into account:
- How many rooms, windows or areas are involved
- The number and length of the joints
- Which sealant suits the joint
- Whether the work is at height
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
What we need to know
When you contact us, it’s useful to know:
- How we’d reach the joints
- The type of property
- Any previous sealing or DIY work
- A few pictures by email, if you can
To get a quote, drop us a line at info@mrmastic.co.uk with the location and a short description of the problem. We will give you a clear quote before any work starts.
What happens on the day
On the day, we look over the joints with you first, so you know exactly what we are doing. Surfaces next to the work are protected before any work begins. The work normally takes a few hours for a handful of gaps, and longer for a whole building. Somewhere like Methlick may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We plan the order of work and access, floor by floor or flat by flat.
- We take out any damaged or unsuitable sealant.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- For business premises, tell us about site rules or sign-in
- Clear the area around the work
- Let us know about earlier repairs to the joints
Getting a quote
Getting a quote is simple: let us know what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand.