Highland · Scotland
Fire-rated sealant in Maryburgh, Highland
Our applicators work in Maryburgh on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Unsealed gaps where pipes and cables go through a wall
- New service routes left unsealed after building work
- Open gaps behind door architraves
Fire rated sealant in Maryburgh
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. We check the size and the substrate before choosing the product, then apply it to the depth its tested detail calls for. If you have open holes round services passing through fire walls and standard silicone or caulk in a fire-stopping gap, we can put it right, on door frames, pipe & cable gaps and service penetrations alike.
For holiday lets, guest houses and community buildings in or near Maryburgh, the washrooms and kitchens need the same care as any city building, and fire-rated joints should be kept in good order.
All of our work is guaranteed for twelve months.
- Place
- Maryburgh (IV7)
- Region
- Highland
- Cover
- One year on every job
- Quotes
- A clear price before work begins
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Workplaces and buildings in Maryburgh
If you run a hotel, guest house or holiday let in a coastal place like Maryburgh, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details, though we don’t certify buildings or do fire risk assessments.
For site and facilities teams at buildings such as Dingwall Academy, service openings in fire-resisting walls need checking after any refurbishment.
Maryburgh is about 11 miles north-west of Inverness, in Highland. Every kind of property in Maryburgh is covered for fire rated sealant. The work is guaranteed for a year. Across Highland, we cover 253 places, and Maryburgh is one of them.
All of IV7 is covered for fire rated sealant. Streets in the area include Seaforth Place, Muirden Road and Rosshill Drive. If you are just outside Maryburgh, we cover Conon Bridge (1 mile south-east), Dingwall (2 miles north), Easter Kinkell (2 miles east), Blairninich (3 miles north-west) and Muir of Ord (4 miles south). We also work in nearby towns such as Inverness (11 miles south-east), Cradlehall (13 miles south-east), Merkinch (10 miles south-east), Hilton (12 miles south-east), Alness (11 miles north-east) and Invergordon (13 miles north-east). Island and remote addresses take a little more planning, so please mention your location when you send an email to info@mrmastic.co.uk.
Around Maryburgh
Locally, jobs take us to homes and businesses close to Conon Hotel. Maryburgh’s nearest station is Conon Bridge station, about 0.8 miles south. Well-known places in the area include Dingwall Castle (1.8 miles north-east) and Ross Memorial Hospital (1.7 miles north-east). For a walk, there’s Tollie Red Kites RSPB Reserve and Loch Ussie.
Places near Maryburgh
Also in Maryburgh
Your questions about fire rated sealant in Maryburgh
Can you help a landlord with a rental near Conon Bridge station?
Yes. We work for landlords and agents as well as householders, and several properties can be quoted together. You can email us at info@mrmastic.co.uk with the details for a clear quote.
How do Scotland’s building regulations apply to fire-rated sealant in Maryburgh?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Is intumescent sealant the same as fire-rated sealant?
Intumescent describes a material that swells in heat. Intumescent sealants are a type of fire-rated sealant and which one is used depends on the job.
Do I need to be at home?
It depends on the job. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
Is the work guaranteed?
Yes, for a year. If anything is not right with the work within the year, let us know and we’ll sort it.
Can ordinary silicone be used in a fire-stopping gap?
No. It looks sealed but will not perform as fire stopping. A tested fire-rated product is needed, or ask us to do it.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done and you’ll get one quote.
Can you fill the gap behind a fire door frame?
Yes, if the gap is within the product’s tested range. Our work is the gap around the frame and we’ll tell you if we spot problems with the door.
Keeping the joints in good condition
Good habits help new joints last longer. A few tips:
- Include fire stopping when you schedule refits
- Get damaged fire seals looked at promptly
- Make resealing part of every contractor’s brief
- Don’t paint over fire sealant until it has cured
Look at the sealed gaps as part of your routine walk-rounds. Look for cracks, gaps or sealant that has been cut or pulled out and have them put right.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is generally a straightforward job.
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
When to call us in Maryburgh
Gaps around door frames are easily missed. The gap between the frame and the wall is hidden behind the architrave, so it can be left open when a door is replaced.
Any of these means the joints need attention:
- Gaps left after a refit or conversion
- Ordinary sealant used where a fire-rated product was needed
- Open joints along the top of partitions
- Sealant items on a fire risk assessment action list
If you let a flat or house near Conon Bridge station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Questions to ask before you book
- Are they insured?
- What preparation is included
- Which sealant they’ll use, and why
- Whether they seal over old material or remove it
How we quote for fire rated sealant
We don’t publish a price list, because jobs vary so much. The quote depends on:
- The number and length of the joints
- Mould in or behind the old joints
- Working hours on commercial sites
- How many areas need sealing
The cost reflects the work involved, not a rough estimate. That’s why we ask a few questions first and give you a clear price before work begins.
What we need to know
When you call or email, these details help:
- How we’d reach the joints
- Where the job is, and your postcode
- Photos by email, if that’s easy
- Whether it’s a home or a business
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work before giving you a price.
When something else is needed
It helps to know what we can’t do too:
- Large holes that need a different fire-stopping system
- Sign-off of the building, which sits with building control or your assessor
- Fire risk assessments, which need a qualified assessor
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we will tell you honestly.
Where we work in Maryburgh
- Pipe & cable gaps
- Linear gaps
- Door frames
- Flats & HMOs
- Service penetrations
- Plasterboard & masonry
What happens if it’s left?
An open gap in a fire-resisting wall is a route for smoke and fire. Sealing it properly restores what the wall was there to do, and the work involved is often modest. In a place like Maryburgh, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.
The cost depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. We give a clear quote before any work starts, so you know where you stand.
Why us?
- Rated 4.9 stars on Google
- Neat joints and a tidy finish
- Quality sealants from Arbo and Everbuild
- Full insurance on every job
How the visit works
When we arrive, we look over the joints with you first, so there are no surprises. We protect the surfaces around the joints before any work begins. The work generally takes from a few hours to a few days, depending on the number of gaps and the access. For a place like Maryburgh, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- Mention any leaks or damp you’ve noticed
- Clear items away from the joints we are working on
- Mention any tricky access
How to get a quote
We quote each job on its own, so the first step is telling us about yours. Just drop us a line at info@mrmastic.co.uk with the details, and photos are welcome.