Perth and Kinross · Scotland
Kinloch Rannoch Fire Rated Sealant
Fire rated sealant for Kinloch Rannoch, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Seals cut through by electricians, plumbers or data installers
- Ordinary sealant used where a fire-rated product was needed
- Gaps left after a refit or conversion
What we can’t put right
We’d rather tell you now than do work that won’t last, so here’s what sealant can’t put right:
- Deciding what fire stopping a building needs
- Problems with the door itself rather than the gap around the frame
- Certifying a building or signing off its fire safety
If in doubt, send an email to info@mrmastic.co.uk and we will say what we think.
Where we work in Kinloch Rannoch
- Linear gaps
- Service penetrations
- Plasterboard & masonry
- Door frames
- Pipe & cable gaps
- Flats & HMOs
Fire rated sealant for homes and businesses in Kinloch Rannoch
We often work from an action list drawn up by a fire risk assessor. If you share the list, we can quote for the gaps that need fire-rated sealant. If you have fire seals that have cracked with movement and fire stopping disturbed by later work, we can put it right, whatever the surface.
For holiday lets, guest houses and community buildings in or near Kinloch Rannoch, the washrooms and kitchens need the same care as any city building, and fire-rated joints should be kept in good order.
Big or small, you get the same 12-month guarantee.
- Where
- Kinloch Rannoch (PH16)
- Wider area
- Perth and Kinross
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Places near Kinloch Rannoch
Also in Kinloch Rannoch
What fire rated sealant looks like in Kinloch Rannoch
Kinloch Rannoch has hotels and guest accommodation in and around it. For hotels, a room-by-room programme keeps most rooms in use while the work goes on. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we do not certify buildings or do fire risk assessments.
Around Kinloch Rannoch, as everywhere, fire rated sealant is only as good as the preparation behind it.
Kinloch Rannoch is about 33 miles west of Blairgowrie and Rattray, in Perth and Kinross. From the centre of Kinloch Rannoch to the outskirts, we cover fire rated sealant for every kind of property, from flats and houses to offices and hotels. Our area takes in 107 places across Perth and Kinross, from the larger towns to small villages. You can also see our page for Dundee, roughly 49 miles from Kinloch Rannoch.
Postcode districts we cover here for fire rated sealant: PH16. We cover properties on Riverbank Crescent, Allt Mor Crescent and Allt Mor Place. If you’re just outside Kinloch Rannoch, we cover Trinafour (5 miles north-east), Boreland (9 miles south-east), Fearnan (9 miles south-east), Old Struan (10 miles north-east) and Kenmore (11 miles south-east).
Around Kinloch Rannoch
Green spaces nearby include Dunalastair Water.
Your questions about fire rated sealant in Kinloch Rannoch
How do Scotland’s building regulations apply to fire-rated sealant in Kinloch Rannoch?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Do you work for hotels and guest houses in Kinloch Rannoch?
Yes, we work for hotels as well as homes and businesses. A room-by-room programme keeps most rooms in use while the work goes on.
Do you provide details of the products used?
Yes. We record the locations we’ve sealed and the products used to keep with your fire safety documents.
What does intumescent mean?
Intumescent means it swells when heated to help seal the gap. Intumescent sealants are one kind of fire-rated sealant; which product suits depends on the gap, the substrate and the service.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator, and we’re fully insured.
Do you take out the old sealant first?
Always. Sealing over old sealant is the main reason resealing fails early, so we never do it.
Can ordinary silicone be used in a fire-stopping gap?
No. Where a fire-rated seal is needed, it has to be a product tested for that use, installed to its details.
Where are you based?
Mr Mastic is based in Crawley. We cover Kinloch Rannoch and the rest of Perth and Kinross.
What affects the cost of fire rated sealant
We quote each job individually. These are the things that affect it:
- The old material and how stubborn it is
- The product the joint needs
- How many areas need sealing
- Working hours on commercial sites
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
What to tell us for a quote
You don’t need to know the technical terms. It helps if you can tell us:
- Roughly how big the job is
- The address or postcode of the job
- Any access issues, like height or stairs
- If someone has resealed it before
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. Whenever you are ready, email us at info@mrmastic.co.uk.
What we do, step by step
Every visit runs the same way: we check the joints, protect the area around them, do the work and tidy away. Most jobs take anything from a few hours to several days, depending on how many gaps there are. Around Kinloch Rannoch, distance and access matter more than parking. Let us know how to find you and how to reach the joints.
- We plan the order of work and access, floor by floor or flat by flat.
- We take out any damaged or unsuitable sealant.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- We record what was done and flag anything that needs a different system.
Getting ready for the visit
- Let us know if you’ve seen damp or leaks
- Mention any parking rules near the property
- Mention any sign-in or site rules at work premises
Get a quote
Every job is quoted individually, so start by telling us what you need. Simply email us at info@mrmastic.co.uk and describe the job and send pictures if you have them.
Advice
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
A DIY attempt does not rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
What we are called out for in Kinloch Rannoch
A lot of fire stopping is out of sight: above ceilings, inside risers and behind panels. Out of view, damage sits unnoticed until someone inspects.
The most common problems we see are:
- Gaps left after a refit or conversion
- Gaps around pipes and cables through fire-resisting walls
- Joints picked up in a fire-stopping survey
- Cracked or shrunken fire-rated sealant
For buildings such as The Old Church Of Rannoch, service openings in its walls need the right fire-rated sealant, as in any building.
What to look for in a quote
- How hidden problems are handled
- What the quote includes, VAT included or not
- How long to leave it before use
- Who turns up on the day
What the job involves on each surface
Linear gaps
Head-of-wall gaps are often hidden above suspended ceilings. We seal them along their full length.
Service penetrations
A copper pipe, a cable and a plastic pipe can all need different fire-stopping details. We follow the manufacturer’s tested detail for each.
What happens if it’s left?
Doing it once, properly, beats doing it twice. Work that does not follow the tested detail may have to come out again once someone inspects it. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
Combining jobs into one visit is normally more efficient than separate visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
Why Kinloch Rannoch customers choose us
- ARBOMaster approved applicator
- Any old sealant cut out fully, not covered over
- Neat joints and a tidy finish
- Fully insured
Take a look at our cost guide and our reviews.