Perth and Kinross · Scotland
Fearnan Fire Rated Sealant
Fire-stopping gaps in Fearnan need attention? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Door frames with gaps between frame and wall
- Ordinary sealant used where a fire-rated product was needed
- Gaps flagged on a fire risk assessment
Why act early in Fearnan
Sealant is not the fix for every opening. Big openings, bundles of cables and plastic pipes may need batts, collars or wraps instead. If a gap is not suitable for sealant, we’ll tell you. Around Fearnan, water from a failed joint in an older stone home can soak into timber and plaster.
What you pay reflects the work, not a rough estimate. That is why we ask about the job first and give you a clear price before work begins.
Why choose Mr Mastic in Fearnan
- Any old sealant cut out fully, not covered over
- Fully insured
- 180+ five-star Google reviews
- More than 20 years in sealant work
Take a look at our cost guide or customer reviews.
How we handle fire rated sealant in Fearnan
We often work from an action list drawn up by a fire risk assessor on buildings across Fearnan. Send us the list or the survey and we’ll quote for the fire-rated sealant work on it. We are often asked to deal with holes left by a change of layout and unsealed gaps where pipes and cables go through a wall, on linear gaps, flats & HMOs and plasterboard & masonry.
Commercial work around smaller Scottish places tends to mean hotels, guest houses, schools and halls rather than offices. Each needs sound sealant in its washrooms and kitchens, and fire-rated joints kept in good order.
The work is covered for a year after we finish. If anything is not right with it, send an email to info@mrmastic.co.uk.
- Place
- Fearnan (PH15)
- Region
- Perth and Kinross
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Surface by surface
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Crumbling edges are cleaned back before the sealant goes in.
Masonry and concrete
Preparation counts on brick, block and concrete. The gap is cleaned and backed where required.
Landlords, agents and businesses in Fearnan
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we will quote.
Housing providers, facilities teams and property managers book us too in Fearnan and across Perth and Kinross. We can quote a run of properties together, and we are fully insured for the work.
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
What happens on the day
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. After that, the work takes from a few hours to a few days, depending on the number of gaps and the access. In smaller Scottish places, parking is generally less of an issue than access and distance. Let us know how to find you and how to reach the joints.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Finally, we list where we worked and what we used, for your records.
How to prepare
- For indoor joints, keep the area dry beforehand if you can
- Mention any tricky access
- Mention any parking rules near the property
Getting a quote
Need a quote? Please drop us a line at info@mrmastic.co.uk and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Read more
Workplaces and buildings in Fearnan
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
In and around Fearnan, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Fearnan is about 27 miles north-west of Perth, in Perth and Kinross. Jobs in Fearnan get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. We cover 107 towns and villages across Perth and Kinross, from the larger towns to small villages. Dundee is on our list too, around 43 miles away.
Work in PH15 works the same way as everywhere else we cover. That includes homes and businesses on Dalcharian, Tay Sealladh and Tigh na Loan. Neighbouring places we cover for fire rated sealant include Boreland (1 mile west), Acharn (2 miles east), Kenmore (3 miles east), Aberfeldy (9 miles east) and Kinloch Rannoch (9 miles north-west).
Around Fearnan
A little further out are Carnbane Castle (3.4 miles north-west) and Scottish Crannog Centre (3 miles east). Open spaces near Fearnan include Lochan nan Uan and Drummond Hill.
Quotes for fire rated sealant in Fearnan
For a quick quote, just ask. The main things that affect it are:
- Working hours on commercial sites
- The type of sealant required
- How much there is to do
- The old material and how stubborn it is
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference.
What to tell us for a quote
Before you ask for a quote, have a think about:
- How we’d reach the joints
- How many joints, rooms or windows are involved
- Where the property is
- The problem you’ve noticed
Asking for a quote is easy: let us know what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we’ll take it from there.
FAQs for Fearnan
Do you cover smaller places like Fearnan?
Yes, we do. We work across all of Scotland, and smaller places are part of that. Longer journeys are simply planned in advance.
Is Fearnan in your area for fire rated sealant?
Yes. We work across all of Scotland, and Fearnan is part of that. You can drop us a line at info@mrmastic.co.uk and let us know what needs doing, and we will give you a clear price.
How long does the job take?
A typical job takes anything from a few hours to several days, depending on how many gaps there are. Your quote will say how long we expect yours to take.
Can you do several jobs on one visit?
Yes. Just list everything you need.
Will we have a record of what was sealed?
Yes. We record the locations we’ve sealed and the products used.
Will it make a mess?
Very little: the area around the joints is protected first, and we tidy up before we go.
What’s the difference between intumescent and fire-rated sealant?
Fire-rated sealant covers any sealant tested for use in fire stopping. Intumescent types expand when heated, and they’re one option among several. The specification and the tested detail decide which is used.
Can ordinary silicone be used in a fire-stopping gap?
No. Where a fire-rated seal is needed, it has to be a product tested for that use fitted to the maker’s details.
When to call us in Fearnan
Movement in the structure can open gaps too: cracked or debonded sealant leaves an open route through the wall. Damage from cleaning, knocks and maintenance adds to it.
Signs it’s time to call us include:
- Gaps left after a refit or conversion
- Unsealed gaps around fire door frames
- Cracked or shrunken fire-rated sealant
- Gaps around pipes and cables through fire-resisting walls
Whether the job is in Fearnan itself or nearby, the right material for each joint matters as much as a neat finish.
What your quote should include
- Whether you can choose the colour
- How much experience the applicator has
- Whether they’re fully insured
- The length of the guarantee