Kent · England
Hoath Fire Rated Sealant
Professional fire rated sealant in and around Hoath, with every bit of old sealant taken out first and a 12-month guarantee.
- Door frames with gaps between frame and wall
- Gaps filled with a product that isn’t fire-rated
- Gaps left after a refit or conversion
Fire rated sealant in Hoath
A fire seal relies on being installed the way it was tested: correct depth, correct backing and a product suited to the surfaces. That detail is what we take care over. If you have damaged fire sealant left by other trades and unsealed gaps where pipes and cables go through a wall, we can put it right.
For a small place like Hoath, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
We stand behind the work with a one-year guarantee, so you’re not left on your own once the job is done.
- Where
- Hoath (CT3)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Why deal with it now?
Fire-rated sealants are less forgiving than ordinary ones. How it’s installed changes how it performs, so we follow the maker’s details on every gap. Around Hoath, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we’ll explain the quote if you ask.
Why Hoath customers choose us
- Approved under the ARBOMaster scheme
- We are fully insured
- Over 20 years’ experience
- Every job guaranteed for a year
Read our cost guide and what customers say.
How we quote for fire rated sealant
For a quick quote, just ask. The main things that affect it are:
- The size of the job
- The old material and how stubborn it is
- How many rooms, windows or areas are involved
- Which sealant suits the joint
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- Access, such as stairs, a lift or height
- The type of property
- Any previous sealing or DIY work
- How many joints, rooms or windows are involved
To get a quote, call 0345 464 0079 or email us with the location and a short description of the problem. You’ll have a clear quote before work begins.
FAQs for Hoath
Can you help a landlord with a rental near Herne Bay station?
Yes. We work for landlords and letting agents as well as householders, and several properties can go on one quote. Just phone 0345 464 0079 or drop us an email with the address and what needs doing, and we will give you a clear price.
Will you come out to Hoath?
Yes, Hoath is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you provide details of the products used?
Yes. We record the locations we’ve sealed and the products used for your files.
Are you fully insured?
Yes. We are fully insured, with over 20 years’ experience in sealant work.
Can I add another job to the visit?
Yes. Just list everything you need.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Can I choose the sealant colour?
Yes. Sealants come in white, clear, grey and other colours, and we agree the colour with you before any work starts.
Do you work in flats, HMOs and commercial buildings?
Yes. We work in flats, HMOs, schools, offices and other commercial buildings, including occupied ones. The order of work and access are planned with you.
What happens on the day
There’s no need to move everything out before we come, only the area right around the joints. Everything nearby is protected, and the job takes anything from a few hours to several days, depending on how many gaps there are for a typical job. Somewhere like Hoath needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- Tell us about any previous sealing or DIY attempts
- Mention any sign-in or site rules at work premises
- Plan for the work area to be out of bounds to pets and children
Getting a quote
Every job is quoted individually, so start by telling us what you need. Just call 0345 464 0079 or send us an email with the details.
Advice
What sealant work cannot fix
Sealant isn’t the answer to every problem, and we’ll tell you before any work starts. It will not solve:
- Certifying a building or signing off its fire safety
- Construction that doesn’t provide fire resistance on its own
- Problems with the door itself rather than the gap around the frame
Not sure which it is? You can phone 0345 464 0079 or email us and we will tell you honestly.
Joints and surfaces we work on
- Service penetrations
- Plasterboard & masonry
- Flats & HMOs
- Door frames
- Pipe & cable gaps
- Linear gaps
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again.
Fire rated sealant around Hoath
For seaside hotels, guest houses and holiday lets around Hoath, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you let a flat or house near Herne Bay station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. Community buildings like Church of the Holy Cross are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Hoath is about 3 miles south-east of Herne Bay, in Kent. Whether you’re in the middle of Hoath or further out, fire rated sealant is available for homes and businesses alike, from flats and houses to offices and hotels. Hoath is one of 922 towns and villages in Kent we cover for fire rated sealant. You can also see our page for Chelmsford, about 40 miles away.
Here we cover the CT3 postcode area for fire rated sealant. Local streets include Church Road, Marley Lane and Barn Close, and we cover them all. Neighbouring places we cover for fire rated sealant include Maypole (1 mile north), Knave's Ash (1 mile west), Old Tree (1 mile north-east), Millbank (1 mile north) and Hollow Street (1 mile east). Further out, we also cover Canterbury (5 miles south-west), Margate (10 miles east), Dover (15 miles south-east), Ramsgate (11 miles east), Broadstairs (12 miles east) and Whitstable (6 miles west).
Around Hoath
Around Hoath, our work takes us to homes and buildings near Spires Academy and Curtis Wood, among other places. The nearest railway station is Herne Bay station, roughly 2.9 miles north-west of the centre. Nearby you’ll also find St Martins Hospital (4.6 miles south-west). The countryside around Hoath includes West Blean and Thornden Woods.
What we are called out for in Hoath
Buildings are refitted and reconfigured over the years. A house turned into flats or an HMO, or an office split into smaller units, brings new walls, new service routes and new gaps.
If you can see any of these, it’s time to have the joints looked at:
- Holes left by a change of layout
- Standard silicone or caulk in a fire-stopping gap
- Old fire sealant that has split or come away
- Fire stopping disturbed by later work
For site and facilities teams at buildings such as Hoath Primary School, service openings in fire-resisting walls need checking after any refurbishment.
Before booking anyone
- The length of the guarantee
- When the joint can take water or movement
- Whether VAT is included
- How the surfaces are prepared before sealing
Towns and villages near Hoath
More services for Hoath
Surface by surface
Flats and HMOs
Working in occupied flats needs some planning. We agree access to each flat and the common parts before any work starts.
Plasterboard walls
Service holes in plasterboard are often rough and oversized. Gaps that are too big for sealant alone need a different detail.