Kent · England
Fire-rated sealant in Maypole, Kent
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Maypole, with a 12-month guarantee on every job. Call for a quick quote.
- Open joints along the top of partitions
- Damaged fire sealant left by other trades
- Open gaps behind door architraves
Fire rated sealant in Maypole: local notes
For seaside hotels, guest houses and holiday lets around Maypole, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Rented homes near Herne Bay station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product. Community buildings like Church of the Holy Cross are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Maypole is about 2 miles south-east of Herne Bay, in Kent. Anywhere in CT3, our applicators can take on fire rated sealant. Across Kent, we cover 922 places, and Maypole is one of them. For nearby work, see our Chelmsford page (40 miles or so).
Here we cover the CT3 postcode area for fire rated sealant. That includes homes and businesses on Maypole Lane and Maypole Road and the roads around them. Neighbouring places we cover for fire rated sealant include Old Tree (1 mile east), Millbank (1 mile north), Hoath (1 mile south), Knave's Ash (1 mile south-west) and Highstead (1 mile north-east). We also work in nearby towns such as Canterbury (5 miles south-west), Margate (10 miles east), Dover (15 miles south-east), Ramsgate (11 miles east), Broadstairs (12 miles east) and Whitstable (6 miles west).
Around Maypole
We work in homes and buildings around Spires Academy and Curtis Wood. For rail, the closest station is Herne Bay station, roughly 2.6 miles north-west of the centre. Well-known places in the area include St Martins Hospital (4.9 miles south-west). Not far away are West Blean and Thornden Woods.
Fire rated sealant in Maypole, done properly
Intumescent sealant looks much like any other sealant until it gets hot; in a fire it expands into the joint. The right product depends on the gap size, the substrate and what passes through, so we work to the manufacturer’s details. If you’re dealing with unsealed gaps where pipes and cables go through a wall and ordinary sealant used where a fire-rated product was needed, we can put it right.
For holiday lets, converted business premises or a community building near Maypole, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Place
- Maypole (CT3)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Signs you need fire rated sealant in Maypole
Gaps around door frames are easily missed. The gap between the frame and the wall is hidden behind the architrave, so it’s easy to leave unsealed when doors are changed.
Keep an eye out for these signs:
- Open holes round services passing through fire walls
- Linear gaps at the head of walls
- Fire seals that have cracked with movement
- Fire stopping disturbed by later work
Schools such as Hoath Primary School are buildings too, and fire-stopping around service openings should be restored whenever new services go in.
Before you book anyone
- How the colour is chosen
- When the joint can take water or movement
- What preparation is included
- What product goes in the joint
Aftercare tips
To keep the joints looking good and working properly:
- Look in service cupboards and ceiling voids from time to time
- Don’t fill fire-stopping gaps with ordinary foam or silicone
- Report cracked or damaged seals as soon as you notice them
- Keep the record of products and locations with your fire safety documents
Avoid covering a sealed gap with anything that is not part of the tested detail. Repairs should use a matching fire-rated product. We can tell you which product we used.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Sealing it early is a simple step to take.
DIY sealant or a professional job?
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
What happens on the day
When we arrive, we look over the joints with you first, so there are no surprises. We protect the surfaces around the joints before any work begins. The work usually takes a few hours for a handful of gaps, and longer for a whole building. For a village or hamlet like Maypole, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Where the tested detail needs backing or fill, we fit it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Before we arrive
- On commercial sites, let us know about site rules
- Tell us about any previous sealing or DIY attempts
- Let us know if you’ve seen damp or leaks
How to get a quote
We do not publish a price list. Instead, we give you a clear price for your job. To arrange one, call 0345 464 0079 or email us.
Advice
Maypole questions
Do you work for landlords with property near Herne Bay station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can ring 0345 464 0079 or email us with the details for a clear quote.
Is Maypole in your area for fire rated sealant?
Yes, Maypole is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job, and we’ll send you a clear quote.
Do the sealants smell?
Possibly a little. It fades as the sealant cures.
What does fire rated sealant cost?
Size, access and the old material all affect the cost. Call for a quick quote and we will talk you through it.
What information do you need?
A short description and the location. If we need more, we’ll ask.
Are you fully insured?
Yes. Full insurance covers our work.
Where do you work from?
We work from Crawley. We cover Maypole and the rest of Kent.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint before resealing.
Surface by surface
Linear gaps
A linear joint may need to allow for movement as well as fire. The product and depth are chosen to suit both.
Flats and HMOs
Conversions normally leave a mix of old and new service holes. We seal the ones on your specification with a tested product and record where they are.
Places near Maypole
More services for Maypole
What sealant work can’t fix
It helps to know what we can’t do too:
- Fire doors that need new seals, closers or hardware
- Fire risk assessments, which need a qualified assessor
- Big openings where sealant alone isn’t the tested solution
If you’re not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer.
What we seal
- Flats & HMOs
- Door frames
- Service penetrations
- Plasterboard & masonry
- Pipe & cable gaps
- Linear gaps
What affects the quote in Maypole
Jobs vary more than people expect. What affects the quote:
- Whether there’s mould to deal with
- The size of the job
- How easy the joints are to reach
- Working hours on commercial sites
What it costs depends on the size of the job, how much old material has to come out and access to the work. You will have a clear quote before any work starts.
Helping us quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- Pictures of the joints, sent by email
- How many joints, rooms or windows are involved
- Where the job is, and your postcode
- How we’d reach the joints
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work and give you a clear price.