Angus · Scotland
Fire Rated Sealant in Clayholes
Problem with your fire-stopping gaps in Clayholes? We remove the old material, prepare the joints and seal them properly.
- Door frames with gaps between frame and wall
- Gaps filled with a product that isn’t fire-rated
- Open holes round services passing through fire walls
How we handle fire rated sealant in Clayholes
Deciding which gaps need fire stopping is not our role; your assessor, designer or building control sets that out. Our part is applying the specified sealant carefully, to the right depth and with the right backing. Typical jobs include gaps left after a refit or conversion and linear gaps at the head of walls, on service penetrations, linear gaps and pipe & cable gaps.
Work in a place like Clayholes is planned ahead, journey included, so the job can fit around guests, residents or opening hours where possible.
The work is covered for a year after we finish. If there’s a problem with it, please drop us a line at info@mrmastic.co.uk.
- Place
- Clayholes (DD7)
- Region
- Angus
- Guarantee
- A year, on every job
- Quote
- A clear price before we start
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Can I do it myself?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly.
What we do, step by step
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours for a handful of gaps, and longer for a whole building and we leave things clean and tidy. Outdoor work around Clayholes depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Work indoors isn’t affected.
- We start with the survey or action list, checking the size and surfaces of every gap.
- We remove any old or unsuitable filler and clean the gap.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Locations and products are noted so you have them on file.
How to prepare
- Mention any sign-in or site rules at work premises
- Tell us about any previous sealing or DIY attempts
- Where the joints are inside, avoid wetting them before we arrive
Get a quote
For a quote, email us at info@mrmastic.co.uk with the location and a short description of the problem. We’ll give you a clear price before any work starts.
Advice
Towns and villages near Clayholes
Also in Clayholes
What we can’t put right
We will always be straight with you, so here’s what new sealant won’t do:
- Openings too large for sealant, which need batts, boards or another system
- Assessing a building’s fire safety
- Doors that aren’t fire doors in the first place
If in doubt, email us at info@mrmastic.co.uk and we will say what we think before booking.
Where we work in Clayholes
- Door frames
- Pipe & cable gaps
- Service penetrations
- Plasterboard & masonry
- Flats & HMOs
- Linear gaps
Different surfaces, different methods
Plasterboard walls
We check that the board around the gap is sound. Crumbling edges are cleaned back before the sealant goes in.
Service penetrations
A copper pipe, a cable and a plastic pipe can all need different fire-stopping details. We follow the manufacturer’s tested detail for each.
Why act early in Clayholes
Fire-rated sealants are less forgiving than ordinary ones. Depth, backing and surface preparation all affect how a seal performs, and we work to the product details every time. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all make a difference.
Why choose Mr Mastic in Clayholes
- Tidy, careful work
- An ARBOMaster approved applicator
- Fully insured
- Anti-fungal silicone where joints get wet
Take a look at our cost guide or our reviews.
Signs you need fire rated sealant in Clayholes
If the sealant is too shallow, has the wrong backing or sits on a dusty surface, it is not installed as tested. Rushed fire stopping is common.
The problems people usually mention when they call are:
- Gaps where walls meet ceilings or slabs
- Ordinary sealant used where a fire-rated product was needed
- Fire stopping disturbed by later work
- Gaps left after a refit or conversion
Rented homes near Golf Street station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
What your quote should include
- The length of the guarantee
- What the cure time is
- Whether they’re fully insured
- What the quote includes, VAT included or not
Clayholes questions
Do you work for landlords with property near Golf Street station?
Yes. We work for landlords and agents as well as householders, and several properties can go on one quote. Just email us at info@mrmastic.co.uk with the address and what needs doing, and we will give you a clear price.
Is Clayholes within the area you cover?
Yes, Clayholes is covered. We work across all of Scotland, and smaller places are part of that. Longer journeys are simply planned in advance.
Is intumescent sealant the same as fire-rated sealant?
An intumescent sealant expands when it gets hot, helping close the gap. Intumescent sealants are one kind of fire-rated sealant; which product suits depends on the gap, the substrate and the service.
Do you seal gaps around fire door frames?
Yes. The joint between frame and wall is sealed with a fire-rated sealant, to the product’s details. The door, its seals and closer are for a door specialist.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
How long does fire rated sealant take?
A typical job takes anything from a few hours to several days, depending on how many gaps there are, including the preparation. Your quote will say how long we expect yours to take.
Can you give us a record of the work?
Yes. We record the locations we have sealed and the products used.
Are you fully insured?
Yes. We’re fully insured for domestic and commercial work.
Looking after it afterwards
So the new joints stay in good condition:
- Don’t paint over fire sealant until it has cured
- File the fire-stopping record where your assessor can find it
- Get damaged fire seals looked at promptly
- Include fire stopping when you schedule refits
Keep the record we give you with the building’s fire safety documents. It saves time at the next inspection or assessment.
Open gaps do not only matter in a fire: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.
Commercial buildings in Clayholes
If you run a hotel, guest house or holiday let in a coastal place like Clayholes, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. We install fire-rated sealant to the product’s tested details, though we don’t certify buildings or do fire risk assessments.
If you look after a building such as Carnoustie High School, gaps opened by contractors for new cabling are a common finding in schools and offices. Community buildings like Carnoustie Parish Church are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
Clayholes is about 1 mile north-west of Carnoustie, in Angus. Wherever you are in the DD7 postcode area, we cover fire rated sealant for homes and businesses. Clayholes is one of 40 towns and villages in Angus where we work. You can also see our page for Dundee, roughly 10 miles from Clayholes.
Here we cover the DD7 postcode area for fire rated sealant. If you need fire rated sealant at a property on Isla Avenue, Shanwell Road and Balmachie Road or a nearby road, we can help. If you’re just outside Clayholes, we cover Carlogie (1 mile north-east), Hunter's Town (1 mile south), Carnoustie (1 mile south-east), Gardynebourg (1 mile south) and Panbride (1 mile east). Within a short drive, we also cover Arbroath (6 miles north-east), Forfar (11 miles north-west), Letham (8 miles north) and Friockheim (9 miles north).
Local landmarks in Clayholes
For rail, the closest station is Golf Street station, about 0.9 miles south of the centre. Nearby you’ll also find Ashludie Hospital (3.8 miles west) and Panmure Castle (1.4 miles north).