Angus · Scotland
Fire Rated Sealant in Carlogie
Fire rated sealant for Carlogie, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Open holes round services passing through fire walls
- Holes left by a change of layout
- Unsealed gaps around fire door frames
Fire rated sealant for homes and businesses in Carlogie
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. One new cable or pipe can leave a gap that nobody goes back to seal. We seal them with a product tested for that kind of gap. We work on plasterboard & masonry, door frames and service penetrations, and common reasons people get in touch are door frames with gaps between frame and wall and fire stopping disturbed by later work.
Work in a place like Carlogie is planned ahead, journey included, so it can be fitted around bookings or opening times where possible.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we will put it right.
- Location
- Carlogie (DD7)
- Region
- Angus
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Fire rated sealant around Carlogie
For seaside hotels, guest houses and holiday lets around Carlogie, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we don’t certify buildings or carry out fire risk assessments.
Community buildings like Holyrood Episcopal Church are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building. Letting a property close to Carnoustie station? Then fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Carlogie is about 1 mile north of Carnoustie, in Angus. If you need fire rated sealant in Carlogie, please drop us a line at info@mrmastic.co.uk for a quick quote. We’re based in Crawley and cover Angus. Our Angus coverage runs to 40 places, Carlogie among them. For nearby work, see our Dundee page.
Every address in DD7 is covered for fire rated sealant, from the main roads to the quietest streets. Local streets include Isla Avenue, Carlogie Farm Road and Prosen Bank. Nearby, we also carry out fire rated sealant in Clayholes (1 mile south-west), Panbride (1 mile east), Carnoustie (1 mile south), Hunter's Town (1 mile south-west) and West Haven (1 mile south-east). Larger places within reach include Arbroath (6 miles north-east), Forfar (11 miles north-west), Brechin (15 miles north), Letham (8 miles north) and Friockheim (9 miles north).
Around Carlogie
For rail, the closest station is Carnoustie station, about 1 mile south-east. A little further out are Panmure Castle (1.4 miles north-west) and Ashludie Hospital (4.3 miles south-west).
What we can’t put right
A few problems are outside what sealant work can do:
- Fire doors that need new seals, closers or hardware
- Walls or floors that weren’t built to resist fire
- Issuing a fire rating or certificate for a building
If you are not sure, just email us at info@mrmastic.co.uk and we will give you a straight answer.
Where we work in Carlogie
- Service penetrations
- Linear gaps
- Flats & HMOs
- Pipe & cable gaps
- Door frames
- Plasterboard & masonry
FAQs for Carlogie
Is Carlogie within the area you cover?
Yes, we do. Our work covers the whole of Scotland, and smaller places are part of that. Longer journeys are simply planned in advance.
I let a flat near Carnoustie station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we’ll send you a clear quote.
Is it OK to seal over old sealant?
No, because it fails. We remove every bit of old sealant first, so the new joint bonds to clean surfaces.
Where is Mr Mastic based?
Mr Mastic is based in Crawley. Our applicators cover Carlogie.
Can you tell me how many minutes the seal will last?
We do not certify fire stopping or quote ratings. We apply the specified product to the manufacturer’s details and giving you a record of where it went.
Do the sealants smell?
There can be a smell while the sealant cures, which fades as it sets. Opening a window helps.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned.
Are you insured?
Yes. Mr Mastic is fully insured, and we’ve been doing sealant work for more than 20 years.
Work for landlords, hotels and businesses
If you manage several properties in or around Carlogie, several properties can go on one quote. Send us the addresses and the work at each.
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Leave it or put it right?
If an assessor has flagged gaps, it makes sense to close them before the next review. Getting them done and written up means you can show the action was taken. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
What it costs depends on the size of the job, how much old material has to come out and how easy the joints are to reach. You will have a clear quote before any work starts, so you know where you stand.
Why us?
- Fully insured
- Homes, businesses and hotels
- Old sealant always removed completely
- Anti-fungal silicone where joints get wet
Read our cost guide or our reviews.
Also near Carlogie
Also in Carlogie
Surface by surface
Service penetrations
New gaps tend to show up where services have been added. Old or unsuitable filler comes out before the right sealant goes in over any backing the detail calls for.
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. We seal them to the tested detail, with backing where it’s needed.
How we quote for fire rated sealant
The quote reflects the job in front of us. We take into account:
- How many rooms, windows or areas are involved
- The product the joint needs
- Mould in or behind the old joints
- Any working-time requirements on site
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Call for a quick quote and we’ll go through it with you.
What to tell us for a quote
You don’t need to know the technical terms. It helps if you can tell us:
- Any access issues, like height or stairs
- Pictures of the joints, sent by email
- The address or postcode of the job
- The type of property
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Common problems we fix in Carlogie
Sometimes the wrong product was used from the start: ordinary expanding foam, standard silicone or decorators’ caulk in a place that needed a tested fire seal. It may look fine, but it is not a fire-rated seal.
People normally contact us after spotting one of these:
- Seals cut through by electricians, plumbers or data installers
- Unsealed gaps around fire door frames
- Joints picked up in a fire-stopping survey
- Standard silicone or caulk in a fire-stopping gap
Schools such as Carnoustie High School are buildings too, and fire-stopping around service openings should be restored whenever new services go in.
What to look for in a quote
- What the cure time is
- How much experience the applicator has
- How the joint is cleaned and prepared
- Whether they seal over old material or remove it
What we do, step by step
Every visit runs the same way: we check the joints, protect the area around them, do the work and clear up. It normally takes from a few hours to a few days, depending on the number of gaps and the access. Around Carlogie, distance and access matter more than parking. Tell us how to find the property and how to reach the work, and the visit is planned around that.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- We record what was done and flag anything that needs a different system.
Preparing for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Let us know if you’ve seen damp or leaks
- Mention if the joints have been sealed before
How to get a quote
Need a quote? Please email us at info@mrmastic.co.uk and tell us about the job. We’ll explain what we’d do and give you a clear quote before we start.