Moray · Scotland
Fire-rated sealant in Aberlour, Moray
Professional fire rated sealant in and around Aberlour, with every bit of old sealant taken out first and a one-year guarantee.
- Gaps left after a refit or conversion
- Damaged fire sealant left by other trades
- Open joints along the top of partitions
Fire rated sealant in Aberlour
Landlords, managing agents and facilities teams use us for the sealant items on a fire risk assessment. Send us the list or the survey and we’ll quote for the fire-rated sealant work on it. Common call-outs are for sealant items on a fire risk assessment action list and open joints along the top of partitions, on plasterboard & masonry, pipe & cable gaps and door frames.
Work in a place like Aberlour is planned ahead, journey included, so it can be fitted around bookings or opening times where possible.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.
- Place
- Aberlour (AB38)
- Wider area
- Moray
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Looking after it afterwards
Looking after new joints is easy, and it makes a real difference:
- Take photos of fire stopping before ceilings or boxing go back
- Flag any open gap you spot round a pipe or cable
- Make resealing part of every contractor’s brief
- Check risers, ceiling voids and cupboards during building checks
Any fire seal that’s cut or drilled needs resealing to its tested detail. If you need new services through a sealed wall, plan the fire stopping as part of the job.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Sealing it early is a simple step to take.
Honest limits
Honest advice matters more to us than a booking, so here’s what sealant cannot fix:
- Certifying a building or signing off its fire safety
- Construction that does not provide fire resistance on its own
- Problems with the door itself rather than the gap around the frame
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we’ll tell you honestly.
Joints and surfaces we work on
- Linear gaps
- Door frames
- Plasterboard & masonry
- Pipe & cable gaps
- Service penetrations
- Flats & HMOs
Also near Aberlour
Also in Aberlour
Why act early in Aberlour
Fire-rated sealants are less forgiving than ordinary ones. Depth, backing and surface preparation all affect how a seal performs, and we work to the product details every time. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.
What you get with us
- Arbo and Everbuild products
- We’re fully insured
- Rated 4.9 stars on Google
- Experience in homes, commercial sites and hotels
Read our cost guide and our reviews.
Different surfaces, different methods
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Crumbling edges are cleaned back before the sealant goes in.
Flats and HMOs
Working in occupied flats needs some planning. Access to flats and common areas is agreed in advance to keep disruption down.
FAQs for Aberlour
Do you cover Aberlour for fire rated sealant?
Yes, Aberlour is within the area we cover. Our work covers the whole of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job, and we’ll send you a clear quote.
How do Scotland’s building regulations apply to fire-rated sealant in Aberlour?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We do not certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Can you quote for more than one area?
Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Where are you based?
Mr Mastic is based in Crawley. Our applicators cover Aberlour, along with the rest of our area.
Do you remove the old sealant?
Yes, every time. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
Will there be a smell?
Possibly a little. It fades as the sealant cures, and ventilation helps.
Is it OK to seal over old sealant?
No. Fresh sealant does not stick to old sealant, and it traps any mould or water underneath. We remove it all first.
Do you seal gaps around fire door frames?
Yes. The joint between frame and wall is sealed with a fire-rated sealant, to the product’s details. The door, its seals and closer are for a door specialist.
Should I try it myself first?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What happens on the day
The work is kept neat and contained to the joints we are treating, so you can carry on as normal. The job generally takes a few hours for a handful of gaps, and longer for a whole building, and we tell you how long to leave it before we go. Somewhere like Aberlour may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Old or unsuitable sealant is cut out and the gap cleaned.
- We put in whatever backing or fill the product detail specifies.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
How to prepare
- Try not to wet indoor joints just before the visit
- For business premises, tell us about site rules or sign-in
- Let us know about earlier repairs to the joints
Ask for a quote
Every job is quoted individually, so the first step is telling us about yours. Just drop us a line at info@mrmastic.co.uk with the details.
Related advice
What fire rated sealant looks like in Aberlour
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
Around Aberlour, as everywhere, fire rated sealant is only as good as the preparation behind it. For buildings such as St Margaret's Episcopal Church and Burial Ground, older buildings that have had new heating or wiring often have service gaps worth checking.
Aberlour is about 12 miles south of Elgin, in Moray. From the centre of Aberlour to the outskirts, we cover fire rated sealant for every kind of property, from flats and houses to offices and hotels. Aberlour is one of 58 places in Moray we cover. You can also see our page for Aberdeen, roughly 47 miles from Aberlour.
Work in AB38 works the same way as everywhere else we cover. Fire rated sealant is available to properties on Mary Avenue, High Street and Hill Avenue. We also cover Charlestown of Aberlour (1 mile south-west), Craigellachie (2 miles north-east), Rothes (4 miles north), Dufftown (4 miles south-east) and Drummuir (7 miles east). Further out, we also cover Elgin (12 miles north), Keith (11 miles north-east), Ashgrove (12 miles north), Fochabers (11 miles north-east) and Lhanbryde (11 miles north). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Around Aberlour
Around Aberlour, our work takes us to homes and buildings near The Alice Littler Park and The Mash Tun pub, among other places. Well-known places in the area include Ladycroft Agricultural Museum (1.6 miles north-west) and Fleming Cottage Hospital (less than half a mile south-west). For a walk, there’s Ben Aigan.
For landlords and businesses
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can be quoted together.
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.