Moray · Scotland
Fire Rated Sealant in Charlestown of Aberlour
Fire rated sealant in Charlestown of Aberlour from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- New service routes left unsealed after building work
- Ordinary sealant used where a fire-rated product was needed
- Gaps around pipes and cables through fire-resisting walls
Charlestown of Aberlour: your questions answered
Can you do fire rated sealant in Charlestown of Aberlour?
Yes, Charlestown of Aberlour is within the area we cover. We work across all of Scotland. You can send an email to info@mrmastic.co.uk and let us know what needs doing, and we’ll give you a clear quote.
Do you cover smaller places like Charlestown of Aberlour?
Yes, Charlestown of Aberlour is covered. We work across all of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Where is Mr Mastic based?
We work from Crawley. Our applicators cover Charlestown of Aberlour.
How long will you be here?
As a guide, most jobs take anything from a few hours to several days, depending on how many gaps there are. Larger jobs naturally take longer, and we’ll tell you how long to expect.
Can you do several jobs on one visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
Can I use normal mastic around a pipe through a fire wall?
No. Ordinary silicone, caulk or foam is not tested as fire stopping. If it’s been used, we remove it and use the right product.
Is it OK to seal over old sealant?
No. The old sealant always comes out first.
Do you provide details of the products used?
Yes. Every gap we seal is listed with the product used, so you have it on file.
How we handle fire rated sealant in Charlestown of Aberlour
We often work from an action list drawn up by a fire risk assessor. If you share the list, we can quote for the gaps that need fire-rated sealant. We work on service penetrations, plasterboard & masonry and pipe & cable gaps, and common reasons people get in touch are standard silicone or caulk in a fire-stopping gap and gaps around pipes and cables through fire-resisting walls.
In a smaller place like Charlestown of Aberlour, commercial jobs are more likely to be a hotel, guest house, school, surgery or community hall than an office block. Each needs sound sealant in its washrooms and kitchens, and fire-rated joints kept in good order.
Each job carries a 12-month guarantee.
- Location
- Charlestown of Aberlour (AB38)
- Wider area
- Moray
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Landlord and commercial work in Charlestown of Aberlour
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will quote.
Why act early in Charlestown of Aberlour
An open gap in a fire-resisting wall is a route for smoke and fire. A proper seal lets the wall do its job again, and the work involved is often modest. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Why us?
- Sanitary silicone with an anti-fungal additive in wet areas
- We leave the area clean and tidy
- Approved under the ARBOMaster scheme
- We never seal over old sealant
See what affects the cost or our reviews.
What affects the cost of fire rated sealant
Call for a quick quote. What matters most is:
- How much old sealant there is and how hard it is to remove
- Any mould that needs treating
- The amount of work
- The number of rooms or windows
Leaving a failed joint generally makes the job bigger, not smaller. If you’re not sure whether it needs doing, send an email to info@mrmastic.co.uk for an honest opinion and a quote.
Asking for a quote
There’s no need for technical detail. Just tell us:
- Access, such as stairs, a lift or height
- Pictures of the joints, sent by email
- Where the job is, and your postcode
- Roughly how big the job is
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that’s easy.
Fire rated sealant in Charlestown of Aberlour: local notes
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we do not certify buildings or do fire risk assessments.
If you look after a church, hall or community building such as Aberlour Parish Church, gaps around pipes and cables are worth checking after any building work there. In and around Charlestown of Aberlour, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Charlestown of Aberlour is about 13 miles south of Elgin, in Moray. Jobs in Charlestown of Aberlour get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 58 places across Moray, large and small. Our Aberdeen page covers work nearby.
Jobs for fire rated sealant in AB38 works the same way as everywhere else we cover. You will find streets such as High Street, Queen's Road and Victoria Terrace, all of which we cover. With the A95 close by, Charlestown of Aberlour is simple for us to get to for fire rated sealant. If you’re just outside Charlestown of Aberlour, we cover Aberlour (1 mile north-east), Craigellachie (2 miles north-east), Dufftown (4 miles south-east), Rothes (4 miles north) and Drummuir (7 miles east). We also work in nearby towns such as Elgin (13 miles north), Keith (11 miles north-east), Ashgrove (12 miles north), Fochabers (11 miles north-east) and Lhanbryde (11 miles north). If you’re somewhere remote, the job takes a little more planning, so mention it when you ask for a quote.
What’s near Charlestown of Aberlour
We work in homes and buildings around The Mash Tun pub and The Alice Littler Park. Nearby you will also find Ladycroft Agricultural Museum (1.5 miles north-west) and Fleming Cottage Hospital (under half a mile south-east). The countryside around Charlestown of Aberlour includes Ben Aigan.
How to look after the new joints
Aftercare is simple, and it makes a real difference:
- Ask every contractor to reseal any fire stopping they disturb
- Flag any open gap you spot round a pipe or cable
- Include hidden areas like risers in routine checks
- Allow for resealing whenever new services are run
Avoid covering a sealed gap with anything that is not part of the tested detail. Repairs should use a matching fire-rated product. Ask us if you’re not sure which product was used.
Any job that breaks through a wall or ceiling should include resealing. Doing it at the time avoids leaving gaps behind.
What we cannot put right
We will always be straight with you, so here’s what new sealant won’t do:
- Issuing a fire rating or certificate for a building
- Big openings where sealant alone is not the tested solution
- A wall that is not a fire-resisting element to begin with
If you’re not sure, just email us at info@mrmastic.co.uk and we’ll give you a straight answer.
Surfaces we seal
- Door frames
- Linear gaps
- Service penetrations
- Plasterboard & masonry
- Flats & HMOs
- Pipe & cable gaps
More services for Charlestown of Aberlour
How the visit works
A visit follows a simple pattern: we look at the joints together, protect the area around them, do the work and tidy away. It usually takes from a few hours to a few days, depending on the number of gaps and the access. Outdoor work around Charlestown of Aberlour depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Work indoors isn’t affected.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Old or unsuitable sealant is cut out and the gap cleaned.
- We put in whatever backing or fill the product detail specifies.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Locations and products are noted so you have them on file.
Preparing for the visit
- Let us know about earlier repairs to the joints
- For indoor joints, keep the area dry beforehand if you can
- Let us know about parking restrictions
Get a quote
Need a quote? Please drop us a line at info@mrmastic.co.uk with a few details. We’ll explain what we’d do and give you a clear price before we start.
Advice
DIY sealant or a professional job?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.