East Sussex · England
External & façade joints in Rye Harbour, East Sussex
Our applicators work in Rye Harbour on sealing brickwork movement joints, render, cladding and façade joints. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Sealant pulling away from one side of the joint
- Water getting into walls through failed joints
- Plants rooting in failed movement joints
About our external mastic in Rye Harbour
External mastic is a job where short cuts show quickly. Overfilled joints, missing backing rod and sealant laid over old sealant all tend to fail early. We take the old material out and do it properly. We work on copings & trims, joints between brick and frames and brickwork movement joints, and the jobs we see most are brick movement joints where the sealant has split and plants rooting in failed movement joints.
Somewhere as small as Rye Harbour, homes and farm buildings often face open ground, so walls and rooflines take the full force of wind and rain. Joints on those walls need a sealant that moves with the building and stays in place.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.
- Where
- Rye Harbour (TN31)
- Region
- East Sussex
- Cover
- One year on every job
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Why deal with it now?
The longer a joint stays open, the more water the wall takes in. Wet masonry is more easily damaged by frost, so the damage spreads beyond the joint. Where a wall is exposed, as many are in small places like Rye Harbour, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Combining jobs into one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.
Why Rye Harbour clients choose us
- Arbo and Everbuild products
- One-year guarantee on every job
- Fully insured
- We never seal over old sealant
Read what affects the cost and what customers say.
How to look after the new joints
No joint lasts for ever, but care makes a real difference. Our tips:
- Deal with leaking gutters that soak the joints below
- Walk round the building once a year and look at the joints
- Leave the joints unpainted unless we’ve said otherwise
- Keep high-pressure jets off the joints
Avoid pressure-washing straight into the joints. A strong jet can damage the edges of the bead.
Water getting behind cladding or render can go unnoticed for a long time. When it finally shows inside, the joint may have been open for years, so it’s worth resealing at the first signs.
How it works
You do not need to clear the whole room or building, only the area right around the joints. Everything nearby is protected, and the work takes a few hours to a few days, depending on the length of joint and the access in most cases. In a small place like Rye Harbour, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We inspect the joints and agree which need resealing and how they’ll be reached.
- The old mastic and anything lodged in the joint is removed.
- The joint faces are cleaned and primed where the sealant needs it.
- Backing rod goes in next, setting the depth and keeping the sealant off the back of the joint.
- We gun in a flexible exterior sealant in a colour that suits the wall and tool it neatly.
Getting ready for the visit
- Keep children and pets away from the work area
- Try not to wet indoor joints just before the visit
- Mention any parking rules near the property
Get a quote
To get a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. You will have a clear quote before we start.
Related advice
Can I do it myself?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so just mention it when you contact us.
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Rye Harbour buildings and the weather
Rye Harbour is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on movement joints and outside wall joints, which can dry out and crack sooner where a building faces the weather. Historic houses like Lamb House (about 1.4 miles north-west) are a reminder that the area around Rye Harbour has older buildings as well as new. Where a home is older, older walls and rooflines need a sealant that moves with them and suits the material.
Rented homes near Rye station change hands often, and outside joints that have cracked can let damp into a rental, so check them between lets. Homes close to The Church of the Holy Spirit include some older properties, and old and new materials meet at the roofline and walls, which is where sealant earns its keep.
Rye Harbour is about 10 miles north-east of Hastings, in East Sussex. Rye Harbour gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Across East Sussex, we cover 289 places, Rye Harbour among them. Our Brighton page covers work nearby (39 miles or so).
We cover every part of the TN31 postcode area for external mastic and the streets around it. Whether your property is on Tram Road, Camber Road and Oyster Creek or anywhere close by, our applicators can take on the job. Close by, we work in Rye (1 mile north-west), Camber (1 mile east), East Guldeford (1 mile north), Playden (2 miles north-west) and Houghton Green (2 miles north). Larger places within reach include Hastings (10 miles south-west), Bexhill-on-Sea (14 miles south-west), St Leonards (11 miles south-west), Hastings Old Town (9 miles south-west), Belmont (9 miles south-west) and Hollington (10 miles south-west).
Landmarks near Rye Harbour
Around Rye Harbour, our work takes us to homes and buildings near Inkerman Arms and Rye Harbour LNR. The closest station to Rye Harbour is Rye station, roughly 1.5 miles north-west. Other landmarks nearby include Rye Castle Museum (East Street) (1.3 miles north-west) and Camber Castle (1.2 miles west). Green spaces nearby include Rye Harbour Nature Reserve.
Towns and villages near Rye Harbour
What else we do in Rye Harbour
When to call us in Rye Harbour
Many joints fail because they were sealed too deep or with nothing behind them. If the sealant sticks to the back as well as the sides, it can’t stretch and rips as the joint opens.
Look out for these signs:
- Weathered mastic that no longer stretches
- Rain getting behind render or cladding at a joint
- Brick movement joints where the sealant has split
- Leaking joints around cladding and façade panels
If you look after a building such as Rye College, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
Before you book anyone
- What insurance they hold
- The length of the guarantee
- Is the old sealant removed completely?
- Whether VAT is included
What we cannot put right
To be straight with you, some problems need a different trade:
- Loose or hollow render, which needs re-rendering
- Subsidence or other structural problems
- Rising or penetrating damp from elsewhere in the wall
If you’re not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Joints and surfaces we work on
- Render & cladding joints
- Copings & trims
- Brickwork movement joints
- Joints between brick and frames
- Concrete & block
- Façade panels
Questions from Rye Harbour
Is Rye Harbour within the area you cover?
Yes, Rye Harbour is covered. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Does the coastal weather in Rye Harbour affect outside sealant?
Near the sea, outside joints face more wind, rain and salt than they would inland, so the choice of sealant and the preparation matter even more. Walls facing the sea are usually the first to need attention.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Can you do several jobs on one visit?
Of course. Combining jobs makes good use of the visit.
Should I point up the gap in my brickwork?
No, not if it’s a movement joint. Pointing it stops it working. A flexible sealant is the right fill.
Do you work for hotels and businesses?
Yes. Hotels, offices and other businesses use us.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Is the work guaranteed?
Yes. All our work carries our one-year guarantee.