East Sussex · England
Rye Harbour Regrouting
Raking out old, cracked or stained grout and regrouting tiled walls and floors for Rye Harbour, backed by a 12-month guarantee. Ask us for a quote.
- Kitchen splashback grout stained by grease
- Floor grout that won’t come clean
- Old grout in a dated colour
How we handle regrouting in Rye Harbour
Changing the grout colour is a simple way to update tiles. Light grout can go darker to hide marks, or the other way round. Tell us what you have in mind when you ask for a quote. We work on bathroom floors, shower walls and tiled floors, and people most often call us about stained grout that cleaning won’t shift and splashback grout that has darkened.
Around Rye Harbour, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
Each job carries a 12-month guarantee, large or small.
- Where
- Rye Harbour (TN31)
- Region
- East Sussex
- Guarantee
- A year, on every job
- Quotes
- A clear price before work begins
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Questions from Rye Harbour
Do you cover smaller places like Rye Harbour?
Yes. Rye Harbour is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords with property near Rye station?
Yes, landlords and agents are among the people we work for. You can phone 0345 464 0079 or drop us an email with the details for a clear quote.
Can you regrout just the shower?
Yes, we often do. The shower generally fails first, so many people regrout just that part.
What does regrouting cost?
We do not publish prices, because the cost depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Will there be a smell?
That depends on the sealant. Some smell for a while, some hardly at all.
Should corners be grouted or sealed?
We seal corners with silicone. They flex, and grout there cracks.
Can new sealant go over the old?
No. The old sealant always comes out first, so the new joint bonds to clean surfaces.
What sealant do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we will tell you what we are using.
Regrouting around Rye Harbour
Rye Harbour is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around The Church of the Holy Spirit, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Managing a site like Rye College? Then we reseal washrooms and kitchens in schools and businesses as well as homes. Rented homes near Rye station change hands often, and a regrout while the flat is empty is quicker than working around a tenant.
Rye Harbour is about 10 miles north-east of Hastings, in East Sussex. Every kind of property in Rye Harbour can book us for regrouting. Every job comes with our 12-month guarantee. Rye Harbour is one of 289 places in East Sussex we cover. Our Brighton page covers work nearby (39 miles or so).
Our applicators cover all of TN31 for regrouting. That includes homes and businesses on Tram Road, Camber Road and Oyster Creek and the roads around them. Neighbouring places we cover for regrouting include Rye (1 mile north-west), Camber (1 mile east), East Guldeford (1 mile north), Playden (2 miles north-west) and Houghton Green (2 miles north). Further out, we also cover Hastings (10 miles south-west), Bexhill-on-Sea (14 miles south-west), St Leonards (11 miles south-west), Hastings Old Town (9 miles south-west), Belmont (9 miles south-west) and Hollington (10 miles south-west).
Around Rye Harbour
Locally, jobs take us to homes and businesses close to Inkerman Arms and Rye Harbour LNR. The closest station to Rye Harbour is Rye station, roughly 1.5 miles north-west of the centre. A little further out are Rye Castle Museum (East Street) (1.3 miles north-west) and Camber Castle (1.2 miles west). Green spaces nearby include Rye Harbour Nature Reserve.
When it isn’t the sealant
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Cracked or broken tiles
- A floor or wall that keeps moving
- Water coming from plumbing rather than grout
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think.
What we seal
- Bathroom floors
- Shower walls
- Bathroom wall tiles
- Kitchen splashbacks
- Tiled floors
- Wet rooms
What affects the cost of regrouting
The quote reflects the job in front of us. We take into account:
- How much old sealant there is and how hard it is to remove
- Whether the work is at height
- The size of the job
- The type of sealant required
What you pay reflects the work, not a rough estimate. That is why we ask a few questions first and give you a clear price before work begins.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Pictures of the joints, sent by email
- What’s wrong with the joints now
- If someone has resealed it before
- Where the property is
If you’re in Rye Harbour and need regrouting, ring 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Landlords, agents and businesses in Rye Harbour
Landlords and agents in Rye Harbour can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
Why deal with it now?
Bleach can lighten stained grout for a while, but mould that has got into grout generally comes back. Replacing the grout and resealing the edges is a lasting fix. Where a wall is exposed, as many are in small places like Rye Harbour, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs, plus any working-time requirements on site. Call for a quick quote and we will go through it with you.
Why us?
- 20+ years of sealant experience
- Quality sealants from Arbo and Everbuild
- 12-month guarantee on every job
- 4.9 on Google from 180+ five-star reviews
Read what affects the cost or customer reviews.
Nearby places to Rye Harbour
More services for Rye Harbour
DIY sealant or a professional job?
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
How to look after the new joints
To keep the joints looking good and working properly:
- Give the walls a quick rinse after use
- Open a window or run the fan to clear steam
- Don’t ignore a tile that feels loose
- Use gentle cleaners on grout
Check the corner silicone now and then. Corners flex, so it’s normally the first thing to need attention, long before the grout does.
Tiles can come away if failed grout is left. Once that happens, regrouting will not fix it so early action pays.
How it works
We bring everything the job needs with us. After a quick look at the joints together, we protect the area and start. It normally takes a few hours, or longer for a fully tiled room. Somewhere like Rye Harbour needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- Every tile area is checked for hollow or loose tiles first.
- The old grout is removed to an even depth.
- We vacuum the joints so the new grout bonds.
- We regrout the joints and clean the tile faces.
- Silicone goes into the corners and along the edges.
How to prepare
- Tell us if parking is tricky
- Where the joints are inside, avoid wetting them before we arrive
- Clear items away from the joints we’re working on
Getting a quote
For a quote, ring 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before any work starts.