Aberdeenshire · Scotland
External & façade joints in Pitmedden, Aberdeenshire
Sealing brickwork movement joints, render, cladding and façade joints for homes and businesses in Pitmedden and across Aberdeenshire. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Weeds or debris growing in open joints
- Joints where the bead has come unstuck
- Damp patches traced to an open external joint
Leave it or put it right?
A low-modulus sealant is chosen because it moves without pulling hard at the edges. That matters on brick, render and concrete, which can be weaker at the face. Too stiff a sealant can pull at the edges and break them. In an older home around Pitmedden, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
What you get with us
- Rated 4.9 stars on Google
- Anti-fungal silicone where joints get wet
- A 12-month guarantee on all work
- Old sealant always removed completely
How we handle external mastic in Pitmedden
As ARBOMaster approved applicators, we choose exterior sealants to suit the joint and the surfaces. Some surfaces need a primer before sealing. If you are dealing with plants rooting in failed movement joints and weathered mastic that no longer stretches, we can help.
External sealant needs dry surfaces, so outdoor work around Pitmedden is planned around the weather. Let us know about access to every wall and roofline.
Each job carries a 12-month guarantee.
- Where
- Pitmedden (AB41)
- Wider area
- Aberdeenshire
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Places near Pitmedden
Other services in Pitmedden
Common problems we fix in Pitmedden
Poor preparation causes many early failures: dusty or wet faces, no primer where one was needed, or old sealant left in. The sealant never bonds properly.
People usually contact us after spotting one of these:
- Failed sealant between panels on a façade
- Rigid filler in a joint that should flex
- Damp patches traced to an open external joint
- Old sealant gone brittle and cracked
In and around Pitmedden, as anywhere, good external mastic starts with a clean, dry, properly prepared joint.
Comparing quotes
- How long to leave it before use
- What happens if the job turns out different
- Whether all the old sealant comes out first
- Are they insured?
Landlord and commercial work in Pitmedden
For anyone letting property in or around Pitmedden, several properties can go on one quote. Just tell us the addresses and what each one needs.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
DIY sealant or a professional job?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
How we quote for external mastic
You will get a clear quote before any work starts. It’s based on:
- The type of sealant required
- The number of rooms or windows
- Any mould that needs treating
- Whether the work is at height
The cost depends on the amount of work, how much old material has to come out and how easy the joints are to reach. We give a clear quote before any work starts, so you know where you stand.
What we need to know
What to tell us when you ask for a quote:
- Where the property is
- Access, such as stairs, a lift or height
- Pictures of the joints, sent by email
- The problem you’ve noticed
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. When it suits you, send an email to info@mrmastic.co.uk.
Your questions about external mastic in Pitmedden
Do you cover Pitmedden for external mastic?
Yes, Pitmedden is within the area we cover. Our work covers the whole of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job.
Is Pitmedden within the area you cover?
Yes, we do. We work across all of Scotland, and smaller places are part of that. Longer journeys are simply planned in advance.
Are you insured?
Yes. We are fully insured, and we can confirm the details when we quote.
Where are you based?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
What do you need from me for a quote?
Where the job is, what the problem is and roughly how big it is. If you can, email a few pictures.
Is it OK to fill a movement joint with cement?
No. A mortar-filled joint cannot move, so the wall cracks somewhere else instead. Use a flexible sealant with backing rod.
What’s an expansion joint in brickwork?
It’s a deliberate gap that lets the wall expand and contract without cracking. It should be filled with flexible sealant, never mortar.
Is there a guarantee?
Yes: twelve months. If anything is not right with the work within the year, let us know and we will sort it.
Pitmedden buildings and the weather
Plenty of Scottish homes have harled walls, and joints where harling meets other materials need a sealant that can grip and flex. Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and failed outside joints work against that.
Whether the job is in Pitmedden itself or nearby, the right material for each joint matters as much as a neat finish.
Pitmedden is about 8 miles north-east of Inverurie, in Aberdeenshire. Across the AB41 area, we can carry out external mastic at your property. Pitmedden is one of 161 places in Aberdeenshire we cover. Our Aberdeen page covers work nearby.
We cover every part of AB41 for external mastic. Local streets include Bronie Crescent, Oldmeldrum Road and Bronieside. We also cover the places around Pitmedden: Udny Green (1 mile south-west), Udny Station (2 miles south-east), Tarves (3 miles north-west), Cultercullen (3 miles south-east) and Hattoncrook (3 miles south-west). Larger places within reach include Inverurie (8 miles south-west), Westhill (13 miles south), Garioch (8 miles south-west), Kemnay (12 miles south-west), Kintore (10 miles south-west) and Oldmeldrum (5 miles west).
Around Pitmedden
Other landmarks nearby include Kingseat Hospital (5.3 miles south) and Tolquhon Castle (1.4 miles north-west). Open spaces near Pitmedden include Upper Lake.
How the visit works
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The work itself takes anything from a few hours to several days, depending on the building. Outdoor work around Pitmedden depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Work indoors is not affected.
- First we look over the joints with you, agree which to renew and talk through access.
- The old mastic and anything lodged in the joint is removed.
- The joint faces are cleaned and primed where the sealant needs it.
- Backing rod goes in next, setting the depth and keeping the sealant off the back of the joint.
- The new sealant, chosen to suit the brick or render, is applied and tooled to a neat finish.
Before we arrive
- Tell us about any previous sealing or DIY attempts
- Plan for the work area to be out of bounds to pets and children
- Let us know if you’ve seen damp or leaks
How to get a quote
We do not publish a price list, because every job is different. Instead, we give you a clear quote for your job. To arrange one, send an email to info@mrmastic.co.uk.
Advice
Aftercare tips
Looking after new joints is easy:
- Do not let climbing plants root in the sealant
- Make sure movement joints aren’t pointed over
- Keep high-pressure jets off the joints
- Ask before painting over external sealant
Make sure anyone working on the wall later knows where the movement joints are. They must stay as flexible joints, never rendered or pointed over.
A joint that has stopped moving pushes the movement elsewhere, often as cracks near the joint. Resealing it early helps prevent that.