Aberdeenshire · Scotland

Remedial Sealant in Pitmedden

We cover Pitmedden for removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly.

  • A shower that leaks however often it’s resealed
  • Mould trapped under a layer of silicone
  • Beads that never stuck properly

Remedial sealant in Pitmedden

FAQs for Pitmedden

Do you cover Pitmedden for remedial sealant?

Yes. We work across all of Scotland, and Pitmedden is part of that. Just drop us a line at info@mrmastic.co.uk with a few details of the job.

What guarantee comes with remedial sealant in Pitmedden?

All our work, in Pitmedden and everywhere else, comes with a 12-month guarantee. We are fully insured, and an ARBOMaster approved applicator.

Do you remove the old sealant?

Yes. We cut out all the old sealant and clean the joint.

Can you take off two layers of silicone?

Yes. We cut out all the layers and clean off the film, then the joint is resealed once.

Which products do you use?

We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference.

My shower still leaks after a reseal. Can you sort it?

Yes, normally. We check it’s the sealant and not the tray, valve or waste, then strip and reseal the joints.

Do I have to be there?

For indoor joints, yes, someone needs to let us in. Once we’ve agreed the job, you don’t need to watch us work.

Will there be a smell?

Possibly a little. Any smell clears as the sealant cures, and ventilation helps.

About our remedial sealant in Pitmedden

Not every leak is a sealant leak. Cracked trays, leaking wastes and faulty valves often look like a sealant problem. When the fault is elsewhere, we say so instead of resealing for the sake of it. If you have beads that never stuck properly and thick, messy sealant smeared over tiles, we can put it right, on leaking tray & enclosure joints, failed movement joints and shrunken worktop sealant alike.

A bathroom in a place like Pitmedden gets the same daily wear as one in a city flat. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.

Big or small, it’s backed by our one-year guarantee in Pitmedden and across Aberdeenshire.

Location
Pitmedden (AB41)
Wider area
Aberdeenshire
Cover
A year, on every job
Quote
Quoted before any work starts
Email
info@mrmastic.co.uk
Last updated
26 October 2026
Mr Mastic applicator smiling as he applies silicone to the corner of a bath

Surface by surface

Leaking trays & enclosures

If the tray is cracked, or the leak is from the valve or waste, sealant won’t fix it. We’ll tell you what we find.

Mouldy bath & shower sealant

Where mould keeps coming back, ventilation is usually part of the cause. We’ll reseal and tell you if extraction looks to be the issue.

Quotes for remedial sealant in Pitmedden

You will get a clear quote before we start. It’s based on:

  • Mould in or behind the old joints
  • How many rooms, windows or areas are involved
  • The product the joint needs
  • Whether old sealant or filler has to be cut out

No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part, and we will explain the quote if you ask.

What we need to know

Photos help, but a description is a good start. Try to tell us:

  • Whether it has been sealed before
  • What’s wrong with the joints now
  • A few pictures by email, if you can
  • Any access issues, like height or stairs

A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that’s easy.

Looking after it afterwards

How long the joints last depends on use and care. We suggest:

  • Keep movement joints clear of mortar and paint
  • Do not add new sealant on top of old
  • Get the cause of a repeat leak found before resealing
  • Keep an eye on the ceiling below the bathroom

If the joint ever needs renewing, have it cut out, not sealed over. New silicone doesn’t bond to old.

A split movement joint lets rain into walls and floors, and left long enough, the edges of the joint can crumble. A joint with sound edges is far easier to reseal.

Leave it or put it right?

Adding more sealant is the usual quick fix, and it rarely works. It cannot bond to what’s underneath, leaving the leak in place and one more layer to cut out later. In an older home around Pitmedden, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.

Doing several joints on one visit is usually more efficient than separate visits, so it’s worth mentioning everything you’d like done. We will send you a clear quote for the lot.

Why choose Mr Mastic in Pitmedden

  • Arbo and Everbuild products
  • Any old sealant cut out fully, not covered over
  • Sanitary silicone with an anti-fungal additive in wet areas
  • One-year guarantee on every job

See how sealant jobs are priced or what customers say.

Do you need remedial sealant in Pitmedden?

A lot of failed joints have been sealed over rather than replaced. New silicone cannot stick to the old bead, so the top layer lifts and water and mould collect between the two.

The most common problems we see are:

  • Movement joints that have split or pulled away
  • Dark patches showing through the sealant
  • Sealant applied over old sealant that has lifted
  • Thick, messy sealant smeared over tiles

Around Pitmedden, as everywhere, remedial sealant is only as good as the preparation behind it.

What your quote should include

  • How long the guarantee is
  • How the colour is chosen
  • What happens if they find a problem under the old sealant
  • Whether the sealant suits the joint

Our hiring checklist

Remedial sealant around Pitmedden

In Scotland, private landlords have to meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out.

For jobs in and around Pitmedden, choosing the right material for each joint is as important as a tidy finish.

Pitmedden is about 8 miles north-east of Inverurie, in Aberdeenshire. We provide remedial sealant to homes and businesses in Pitmedden and the surrounding area. Our Aberdeenshire coverage runs to 161 places, and Pitmedden is one of them. Our Aberdeen page covers work nearby.

Jobs for remedial sealant in AB41 is quoted and booked the same way as anywhere else. Local streets include Bronie Crescent, Oldmeldrum Road and Bronieside, all of which we cover. Close by, we work in Udny Green (1 mile south-west), Udny Station (2 miles south-east), Tarves (3 miles north-west), Cultercullen (3 miles south-east) and Hattoncrook (3 miles south-west). Within a short drive, we also cover Inverurie (8 miles south-west), Westhill (13 miles south), Garioch (8 miles south-west), Kemnay (12 miles south-west), Kintore (10 miles south-west) and Oldmeldrum (5 miles west).

Around Pitmedden

Well-known places in the area include Kingseat Hospital (5.3 miles south) and Tolquhon Castle (1.4 miles north-west). Green spaces nearby include Upper Lake.

Map of Pitmedden © OpenStreetMap contributors

Work for landlords, hotels and businesses

Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.

We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.

How the visit works

We work through the job in order: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours for most joints, depending on how much old sealant has to come out, and the area is left clean. Outside jobs in Pitmedden need a dry day, because sealant will not bond to a wet joint, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.

  1. First we find out how and where the joint has failed.
  2. Every layer of old sealant is cut and cleaned out.
  3. The joint is cleaned, treated for mould and left to dry.
  4. Moving joints get backing and a flexible sealant to suit.
  5. The new joint is tooled neatly and we explain anything else we found.

Getting ready for the visit

  • Mention any parking rules near the property
  • On commercial sites, let us know about site rules
  • Try not to wet indoor joints just before the visit

Getting a quote

For remedial sealant in Pitmedden, email us at info@mrmastic.co.uk. Tell us what the problem is and where, and we’ll agree the price before any work begins.

Get a quick quote

Related advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job