Shetland Islands · Scotland

External & façade joints in Levenwick, Shetland Islands

Professional external mastic in and around Levenwick, with every bit of old sealant taken out first.

  • Movement joints filled with mortar instead of sealant
  • Weeds or debris growing in open joints
  • Rain getting behind render or cladding at a joint

Book external mastic in Levenwick

About our external mastic in Levenwick

External mastic is a job where short cuts show quickly. New sealant over old, joints packed with mortar and beads with no backing rarely last long. We strip the joint back and start again. Typical jobs include leaking joints around cladding and façade panels and sealant pulling away from one side of the joint, on joints between brick and frames, copings & trims and façade panels.

External sealant needs dry surfaces, so outdoor work around Levenwick is planned around the weather, and longer journeys are planned in advance. Let us know about access to every wall and roofline.

You are covered for a year from the day we finish. If there’s a problem with it, please send an email to info@mrmastic.co.uk.

Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter
Where
Levenwick (ZE2)
Region
Shetland Islands
Cover
A year, on every job
Quote
A clear price before work begins
Email
info@mrmastic.co.uk
Page updated
26 October 2026

What happens on the day

On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The work itself takes a few hours for a handful of joints, longer for a whole elevation, including the tidy-up. Around Levenwick, distance and access matter more than parking. Let us know how to find you and how to reach the joints, and the visit is planned around that.

  1. We start by walking round the building and agreeing the joints and the access.
  2. We cut out the old mastic and rake out anything in the joint.
  3. Joint faces are cleaned back and primed if the sealant needs it.
  4. Backing rod sized to the joint goes in to set the depth.
  5. The exterior sealant is applied, tooled and checked along its length.

Preparing for the visit

  • Mention if the joints have been sealed before
  • Let us know about stairs, lifts or work at height
  • Mention any leaks or damp you’ve noticed

Ask for a quote

If you are in Levenwick and need external mastic, send an email to info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and you’ll get a clear quote before we start.

Get a price

Advice

Common problems we fix in Levenwick

Many joints fail because they were sealed too deep or with nothing behind them. Sealant bonded to three sides has nowhere to go and rips as the joint opens.

The problems people normally mention when they call are:

  • Movement joints filled with mortar instead of sealant
  • Brick movement joints where the sealant has split
  • Weeds or debris growing in open joints
  • Failed seals between different materials

For jobs in and around Levenwick, choosing the right material for each joint is as important as a tidy finish.

Before booking anyone

  • How the surfaces are prepared before sealing
  • Whether they’re fully insured
  • What happens if they find a problem under the old sealant
  • Is VAT in the price?

10 questions to ask before booking

Work for landlords, hotels and businesses

We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we’ll quote.

Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we are fully insured for the work.

DIY sealant or a professional job?

If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.

If you’ve already had a go yourself, that’s fine. We cut it out and start again, so just mention it when you contact us.

Why it’s worth doing now in Levenwick

Low-modulus sealants stretch easily, so they put less strain on the joint edges. That matters on brick, render and concrete, which can be weaker at the face. Too stiff a sealant can pull at the edges and break them. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.

Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs. Ask us for a quote and we’ll go through it with you.

Why us?

  • 4.9 on Google from 180+ five-star reviews
  • Over 20 years’ experience
  • Anti-fungal silicone where joints get wet
  • You choose the colour before work begins

Read what affects the cost and what customers say.

Levenwick buildings and the weather

Levenwick is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on movement joints and outside wall joints, especially on the side facing the sea. Island weather, with its wind and salt spray, is tough on movement joints and outside wall joints.

In and around Levenwick, as anywhere, good external mastic starts with a clean, dry, properly prepared joint.

Levenwick is in the Shetland Islands. We carry out external mastic for homeowners, landlords and businesses in Levenwick. Across the Shetland Islands, we cover 63 places, and Levenwick is one of them.

Jobs for external mastic in ZE2 works the same way as everywhere else we cover. You will find streets such as Staneybrake and South Punds Park. We also cover Bigton (2 miles west), Hoswick (2 miles north), Sandwick (2 miles north-east), South Scousburgh (3 miles south-west) and Boddam (3 miles south). Within a short drive, we also cover Lerwick (13 miles north), Sound (12 miles north) and Scalloway (12 miles north). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.

What’s near Levenwick

Well-known places in the area include Shetland Crofthouse Museum (3.9 miles south). Green spaces nearby include Loch of Clumlie.

Map of Levenwick © OpenStreetMap contributors

What sealant work cannot fix

Some problems need a builder, plumber or other trade rather than us:

  • Damp that is not coming from the joint
  • Walls that need new movement joints cut into them
  • Failed render or damaged cladding panels

If in doubt, email us at info@mrmastic.co.uk and we will say what we think before booking.

Joints and surfaces we work on

  • Brickwork movement joints
  • Concrete & block
  • Façade panels
  • Copings & trims
  • Render & cladding joints
  • Joints between brick and frames

How the job changes by surface

Concrete and blockwork

Concrete and block walls shrink as they dry and move with temperature. We reseal their joints with backing rod and a flexible product.

Cladding and façade panels

Metal and composite panels move a lot with temperature, so the joint sealant has to cope with frequent movement. The sealant is chosen with that in mind.

Levenwick: your questions answered

Is Levenwick in your area for external mastic?

Yes, Levenwick is within the area we cover. Our work covers the whole of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job, and we will send you a clear quote.

Do you cover smaller places like Levenwick?

Yes, Levenwick is covered. We work across all of Scotland, islands included, from towns to the smallest places. Longer journeys are simply planned in advance.

How long does the job take?

Typically it takes anything from a few hours to several days, depending on the building. Larger jobs naturally take longer, and we will say how long yours will take.

Can I add another job to the visit?

Yes. Just list everything you need and we’ll quote it together.

Can you seal joints between two different materials?

Yes. Joints between dissimilar materials are a big part of external work. We use a flexible sealant suited to both surfaces, primed where needed.

Do you hold any approvals?

Yes. We hold ARBOMaster approved applicator status, and we’re fully insured.

What’s an expansion joint in brickwork?

Walls move with heat, cold and moisture, and planned joints take up that movement. It’s closed with backing rod and a flexible sealant.

Will you leave a mess?

Very little: the area around the joints is protected first, and we tidy up before we go.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job