Highland · Scotland
External Mastic in Kildary
Movement joints in Kildary need attention? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Rigid filler in a joint that should flex
- Failed seals between different materials
- Brick movement joints where the sealant has split
About our external mastic in Kildary
A movement joint is only as good as its depth. Closed-cell backing rod sets the depth and stops the sealant sticking to the back, so it bonds to the two sides only and can stretch. If you are dealing with hard, crazed mastic that has stopped moving and joints where the bead has come unstuck, we can help, whatever the surface.
Outside joints can only be sealed when they’re dry, so work in Kildary depends on the weather, and longer journeys are planned in advance. Let us know about access to every wall and roofline.
All our work comes with a one-year guarantee, wherever you are in Highland.
- Place
- Kildary (IV18)
- Wider area
- Highland
- Guarantee
- One year on every job
- Quotes
- A clear price before work begins
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Do you need external mastic in Kildary?
Joints sealed without backing rod, or far too deep, rarely last. If the sealant sticks to the back as well as the sides, it can’t stretch and rips as the joint opens.
People generally contact us when they notice something like this:
- Hard, crazed mastic that has stopped moving
- Joints where the bead has come unstuck
- Panel joints letting water in
- Failed seals between different materials
If you let a flat or house near Fearn station, outside joints that have cracked can let damp into a rental, so check them between lets.
Before you book anyone
- What preparation is included
- When the joint can take water or movement
- What guarantee comes with the work
- Are they insured?
Different surfaces, different methods
Cladding and façade panels
Cladding and façade panels are usually separated by sealed joints. We reseal them with a sealant suited to the panel material.
Brickwork movement joints
People sometimes point up a brick movement joint by mistake. If that is happened, we rake it out and reseal it properly if the joint can be cleared.
Looking after it afterwards
Simple care keeps the joints in good condition. We recommend:
- Have failed joints looked at early
- Walk round the building once a year and look at the joints
- Never let anyone fill a movement joint with mortar
- Ask before painting over external sealant
Make sure anyone working on the wall later knows where the movement joints are. They should be kept open and resealed, not filled.
Once a joint cannot move, the wall finds another way, generally as cracking in the brickwork or render nearby. Catch it early and you reduce the risk.
When something else is needed
It helps to know what we can’t do:
- Cracking across the wall rather than at a joint
- Adding movement joints to masonry that has none
- Loose or hollow render, which needs re-rendering
If you’re not sure, just email us at info@mrmastic.co.uk and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Joints between brick and frames
- Brickwork movement joints
- Render & cladding joints
- Façade panels
- Copings & trims
- Concrete & block
What external mastic looks like in Kildary
Kildary is within about 2 miles of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That’s hard on movement joints and outside wall joints, especially on the side facing the sea. Kildary is in the west of Scotland, which is wetter than the east, which means movement joints and outside wall joints has to cope with a lot of rain.
Homes close to Church include some older properties, and the joints between older walls, newer extensions and the roofline need a sealant that can move.
Kildary is about 14 miles north-west of Nairn, in Highland. Our applicators cover external mastic for homeowners, landlords and businesses in Kildary, as part of our work across Highland. Our Highland coverage runs to 253 places, Kildary among them.
Work in IV18 works the same way as everywhere else we cover. You will find streets such as Parkside and Parkhill, all of which we cover. We also cover the places around Kildary: Milton (1 mile south-west), Kilmuir (1 mile south-west), Barbaraville (2 miles south-west), Arabella (2 miles east) and Pitcalnie (3 miles south-east). Further out, we also cover Nairn (14 miles south-east), Tain (4 miles north), Alness (8 miles south-west), Dornoch (9 miles north), Invergordon (5 miles south-west) and Fortrose (12 miles south). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
What’s near Kildary
The closest station to Kildary is Fearn station, about 3.4 miles north-east. A little further out are Milntown Castle (0.9 miles south) and County Community Hospital (4.7 miles south-west). For a walk, there’s Loch Eye.
What else we do in Kildary
Quotes for external mastic in Kildary
The quote reflects the job in front of us. We look at:
- The type of sealant required
- Any working-time requirements on site
- Access and height
- How many areas need sealing
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote and we will talk you through it.
What to tell us for a quote
Photos help, but a description is a good start. Try to tell us:
- Whether it has been sealed before
- Access, such as stairs, a lift or height
- What the problem is, such as mould, gaps, leaks or cracking
- Whether it’s a home or a business
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Kildary questions
I let a flat near Fearn station. Can you help?
Yes. We work for landlords and letting agents as well as householders. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we’ll send you a clear quote.
Is external mastic in a coastal place like Kildary any different?
Coastal homes put outside sealant through more weather than inland ones, so the choice of sealant and the preparation matter even more. Walls facing the sea are generally the first to need attention.
What is backing rod for?
The foam is closed-cell backing rod. It keeps the sealant at the right depth and bonded to the sides only so it can flex with the joint.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint.
Do you have insurance?
Yes. We are fully insured.
Do I have to be there?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
When is the sealant fully cured?
Many sealants skin over quickly but take longer to cure fully. We will give you the cure time for the product we used before we leave.
How often do external joints need resealing?
It varies from wall to wall: joints on exposed walls or with a lot of movement age sooner. A yearly look will tell you when they need doing. Every job carries our 12-month guarantee.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we’ll give you a quote.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
How the visit works
Before we leave, we go over the finished joints with you and explain the cure time. The visit itself normally takes anything from a few hours to several days, depending on the building, depending on the amount of work. Somewhere like Kildary may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We start by walking round the building and agreeing the joints and the access.
- Every bit of old sealant and any mortar or debris is cut out.
- The faces are brushed clean and primed where the product requires it.
- Backing rod sized to the joint goes in to set the depth.
- The exterior sealant is applied, tooled and checked along its length.
How to prepare
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us about any water getting in
- Mention any parking rules near the property
Ask for a quote
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved and give you a clear price.