Hampshire · England
Breamore External Mastic
Sealing brickwork movement joints, render, cladding and façade joints in Breamore, with a 12-month guarantee on every job. Ask us for a quote.
- Water getting into walls through failed joints
- Panel joints letting water in
- Cracked joints where brick meets render or frames
When something else is needed
Sealant isn’t the answer to every problem, and we’ll tell you before work begins. It will not solve:
- Adding movement joints to masonry that has none
- Rising or penetrating damp from elsewhere in the wall
- Cracking across the wall rather than at a joint
If in doubt, ring 0345 464 0079 or email us and we will say what we think before you book.
Surfaces we seal
- Joints between brick and frames
- Brickwork movement joints
- Render & cladding joints
- Façade panels
- Concrete & block
- Copings & trims
External mastic in Breamore
As ARBOMaster approved applicators, we choose exterior sealants to suit the joint and the surfaces. Some surfaces need a primer before sealing, and we don’t skip that step. If you have failed seals between different materials and rigid filler in a joint that should flex, we can help, whatever the surface.
External sealant needs dry, clean surfaces, so work around Breamore is planned for dry weather. Let us know about access to every wall, plus any garages or outbuildings.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Breamore (SP6)
- Region
- Hampshire
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Also near Breamore
What else we do in Breamore
Common questions in Breamore
Do you cover Breamore for external mastic?
Yes, Breamore is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or drop us an email and tell us what needs doing.
Is there a guarantee on external mastic in Breamore?
Every job comes with our one-year guarantee, wherever it is. We are fully insured, and an ARBOMaster approved applicator.
Are you fully insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
Can you do several jobs on one visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
What do you put in the joint?
Each joint gets the product that suits it. Movement, water and weather all affect the choice.
Where are you based?
We’re based in Crawley, and we cover South East England, London and all of Scotland.
Do you work at height?
It depends on the height and the site. Low-level joints are straightforward; for higher ones, send details and we will confirm the access.
Are you ARBOMaster approved?
Yes. We hold ARBOMaster approved applicator status, and we are fully insured.
Landlords, agents and businesses in Breamore
In hotels, rooms out of use cost money, so we plan the work room by room. We’ve worked in hotels as well as homes and businesses.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
What external mastic looks like in Breamore
London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. Historic houses like Breamore House (about 1 mile north-west) are a reminder that the area around Breamore has older buildings as well as new. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth.
Schools such as Breamore Church of England Primary School are buildings too, and its movement joints, gutters and trims need looking after like any other building’s. For an older house near a landmark such as St Boniface, the joints between older walls, newer extensions and the roofline need a sealant that can move.
Breamore is in Hampshire. Whether you’re in the middle of Breamore or further out, external mastic is available for homes and businesses alike. Breamore is one of 683 towns and villages in Hampshire we cover for external mastic. For nearby work, see our Southampton page.
Our applicators cover all of SP6 for external mastic. Streets in the area include Salisbury Road, The Shallows and Marsh Lane, all of which we cover. We also cover the places around Breamore: Upper Burgate (1 mile south), Woodgreen (1 mile east), Upper Street (1 mile north-west), Lower Burgate (1 mile south) and Tinkers Cross (2 miles south-west). Larger places within reach include Totton (12 miles east), Romsey (13 miles east), New Milton (15 miles south), Ringwood (8 miles south), Marchwood (15 miles east) and Ashley (15 miles south-east).
Around Breamore
Around Breamore, our work takes us to homes and buildings near Bat and Ball pub and The Burgate School and Sixth Form, among other places. A little further out are Godshill Castle Hill (1 mile south-east) and Fordingbridge Museum (2.1 miles south).
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What affects the quote in Breamore
Some jobs are bigger than they look, and some smaller. What affects the quote:
- Which sealant suits the joint
- How much old sealant there is and how hard it is to remove
- How easy the joints are to reach
- Mould in or behind the old joints
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
Asking for a quote
What to tell us when you ask for a quote:
- Roughly how big the job is
- Any access issues, like height or stairs
- Whether it’s a home or a business
- Where the property is
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or send us an email.
Why deal with it now?
Low-modulus sealants stretch easily, so they put less strain on the joint edges. That protects surfaces like brick, render and concrete. A stiffer product can damage the joint edge as it fails. Where a wall is exposed, as many are in small places like Breamore, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part.
Why us?
- Over 20 years’ experience
- Colour picked to suit the job
- We are fully insured
- Trusted Arbo and Everbuild sealants
Read how sealant jobs are priced and our reviews.
How the visit works
On the day, we start by going over the job with you. We protect the surfaces around the joints before any work starts. Most jobs take a few hours for a handful of joints, longer for a whole elevation. Somewhere like Breamore needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First we look over the joints with you, agree which to renew and talk through access.
- The old mastic and anything lodged in the joint is removed.
- The joint faces are cleaned and primed where the sealant needs it.
- Closed-cell backing rod is fitted to set the depth and stop three-sided bonding.
- The new sealant, chosen to suit the brick or render, is applied and tooled to a neat finish.
Preparing for the visit
- On commercial sites, let us know about site rules
- Clear items away from the joints we’re working on
- Try not to wet indoor joints just before the visit
How to get a quote
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we’ll explain what’s involved and send you a clear quote.
Advice
What the job involves on each surface
Render joints
Cracks along render joints let water in behind the coat. Resealing the joints early keeps water out.
Copings and trims
Metal and stone copings both move with temperature, so a flexible sealant suits them best in all weathers.