Hampshire · England
Remedial Sealant in Breamore
Specialist remedial sealant for Breamore: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Leaks that keep coming back after resealing
- Worktop sealant that has shrunk and split
- Movement joints that have split or pulled away
Remedial sealant in Breamore
If a joint has been resealed and is leaking again, it’s worth a proper look. Send pictures when you phone 0345 464 0079 or drop us an email, and say how long ago it was last done. Typical jobs include torn expansion joints and decorators’ caulk around a bath or shower, on botched or over-sealed joints, shrunken worktop sealant and expansion joints.
Being in a small place like Breamore makes no difference to the job itself: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
We stand behind the work with a one-year guarantee.
- Location
- Breamore (SP6)
- Region
- Hampshire
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Should I try it myself first?
A DIY attempt does not rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Towns and villages near Breamore
More services for Breamore
What we’re called out for in Breamore
One of the commonest remedial jobs is sealant on top of sealant. New silicone cannot stick to the old bead, so the new layer peels, and damp and mould settle between them.
The problems people normally mention when they call are:
- Over-sealed joints coming away
- Floor or wall movement joints that have failed
- Wide, uneven beads that look worse than the old ones
- Leaks that keep coming back after resealing
If you live in an older home near St Boniface, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
What your quote should include
- Whether you can choose the colour
- Are they insured?
- Whether VAT is included
- The length of the guarantee
For landlords and businesses
For anyone letting property in or around Breamore, jobs at different addresses can go on one quote. Send us the addresses and the work at each, and pictures by email help.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
Your questions about remedial sealant in Breamore
Is there a guarantee on remedial sealant in Breamore?
All our work, in Breamore and everywhere else, comes with a 12-month guarantee. We’re also fully insured and ARBOMaster approved.
Will you come out to Breamore?
Yes, Breamore is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Can failed expansion joints be resealed?
Yes. If a joint has been filled with mortar or rigid filler, we rake it out where possible, and reseal with a flexible product.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done and you will get one quote.
Are you ARBOMaster approved?
Yes. We are an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
Will you leave a mess?
Tidy work is part of the job. We protect what’s around the joints, and we clear up when we are done.
Are you insured?
Yes. We are fully insured for domestic and commercial work.
What do you put in the joint?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.
Different surfaces, different methods
Over-sealed & botched joints
A botched joint can hide two or three layers of sealant, and silicone residue is cleaned off the tiles too. New sealant needs a fully clean surface.
Movement & expansion joints
A sealant stuck to the back of the joint cannot stretch. Backing stops that, letting the sealant flex between the two faces.
Breamore homes and their sealant
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
For site and facilities teams at buildings such as Breamore Church of England Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Breamore is in Hampshire. Our applicators cover remedial sealant for homeowners, landlords and businesses in Breamore and nearby. Breamore is one of 683 towns and villages in Hampshire where we work for remedial sealant. Southampton is on our list too, about 17 miles from Breamore.
All of SP6 is covered for remedial sealant, from the main roads to the quietest streets. Local streets include Salisbury Road, The Shallows and Marsh Lane. We also cover Upper Burgate (1 mile south), Woodgreen (1 mile east), Upper Street (1 mile north-west), Lower Burgate (1 mile south) and Tinkers Cross (2 miles south-west). Larger places within reach include Totton (12 miles east), Romsey (13 miles east), New Milton (15 miles south), Ringwood (8 miles south), Marchwood (15 miles east) and Ashley (15 miles south-east).
Landmarks near Breamore
In Breamore, that means homes and buildings near Bat and Ball pub and The Burgate School and Sixth Form, among other places. A little further out are Godshill Castle Hill (1 mile south-east) and Fordingbridge Museum (2.1 miles south).
Honest limits
We will always be straight with you, so here’s what new sealant won’t do:
- A tray or worktop that needs refixing first
- Tiles that have come away from the wall
- Cracks in the fitting rather than the joint
Not sure which it is? You can call 0345 464 0079 or send us an email and we will tell you honestly.
Surfaces we seal
- Botched or over-sealed joints
- Shrunken worktop sealant
- Expansion joints
- Leaking tray & enclosure joints
- Failed movement joints
- Mouldy bath & shower sealant
What we do, step by step
When we arrive, we look over the joints with you first, so you know exactly what we’re doing. Surfaces next to the work are protected before any work begins. Most jobs take a few hours for most joints, depending on how much old sealant has to come out. In a small place like Breamore, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Each layer is cut out and the residue cleaned off.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- The joint is tooled and you’re told about anything else we found.
How to prepare
- Keep children and pets away from the work area
- Tell us about access, such as stairs, a lift or high-level joints
- On commercial sites, let us know about site rules
Get a quote
We don’t publish a price list, because every job is different. Instead, we send you a clear quote for your job. To get started, ring 0345 464 0079 or drop us an email.
Read more
How we quote for remedial sealant
The price is agreed before any work begins. It takes into account:
- The type of sealant required
- How much old sealant there is and how hard it is to remove
- Access and height
- Any mould that needs treating
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. You will know the price before we begin.
Asking for a quote
To make quoting easier, let us know:
- Any previous sealing or DIY work
- Pictures of the joints, sent by email
- Where the job is, and your postcode
- Roughly how big the job is
Getting a quote is simple: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job, and we’ll come back to you with a quote.