Hampshire · England

Remedial Sealant in Lower Burgate

Removing failed, mouldy or leaking sealant and putting it right in Lower Burgate, with a one-year guarantee on every job. Call for a quick quote.

  • Torn expansion joints
  • Repeat leaks from the same joint
  • Decorators’ caulk around a bath or shower

Book remedial sealant in Lower Burgate

What the job involves on each surface

Mouldy bath & shower sealant

Mould that has grown into silicone doesn’t clean out for good. The sealant is cut out completely, the joint treated with a mould remover and dried ahead of a new anti-fungal bead.

Windows & doors

Frames resealed over the top end up with hard, layered mastic. We remove it all and clean back to sound surfaces.

Remedial sealant for homes and businesses in Lower Burgate

If a joint fails again and again, something is causing it. Movement, the wrong product or a leak from somewhere else will defeat even a perfect bead. Finding that cause comes before any new sealant. If you have smears and lumps from a botched reseal and products that weren’t meant for the joint, we can help.

In a village or hamlet like Lower Burgate, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.

Big or small, it’s backed by our one-year guarantee in Lower Burgate and across Hampshire.

Close-up of hands using a sealant gun on the joint between a glass shower screen and tiles
Place
Lower Burgate (SP6)
Region
Hampshire
Cover
One year on every job
Quote
A clear quote up front
Phone
0345 464 0079
Updated
26 October 2026

When it isn’t the sealant

Sealant isn’t the answer to every problem, and we’d rather say so up front. It won’t solve:

  • A bath, tray or worktop that moves until it’s properly fixed
  • Plumbing leaks behind walls or under trays
  • Older mastics that may need an asbestos check before removal

If in doubt, call 0345 464 0079 or email us and we will say what we think.

Where we work in Lower Burgate

  • Failed movement joints
  • Shrunken worktop sealant
  • Mouldy bath & shower sealant
  • Botched or over-sealed joints
  • Expansion joints
  • Leaking tray & enclosure joints

Lower Burgate homes and their sealant

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

For site and facilities teams at buildings such as The Burgate School and Sixth Form, we reseal washrooms and kitchens in schools and businesses as well as homes.

Lower Burgate is in Hampshire. We provide remedial sealant to homes and businesses in Lower Burgate, as part of our work across Hampshire. Lower Burgate is one of 683 places in Hampshire we cover for remedial sealant. We also work in Southampton, about 17 miles from Lower Burgate.

Jobs for remedial sealant in SP6 is quoted and booked the same way as anywhere else. Whether your property is on Kingfisher Drive, Grebe Place and Salisbury Road or anywhere close by, we can help. Nearby, we also carry out remedial sealant in Tinkers Cross (1 mile west), Upper Burgate (1 mile north), Fordingbridge (1 mile south-west), Horseport (1 mile south) and Criddlestyle (1 mile south-east). Within a short drive, we also cover Totton (12 miles east), Romsey (14 miles east), New Milton (14 miles south-east), Ringwood (6 miles south), Barton on Sea (15 miles south) and Marchwood (15 miles east).

What’s near Lower Burgate

Locally, jobs take us to homes and businesses close to Fordingbridge Infant School and The George Inn and the streets around them. Nearby you will also find Godshill Castle Hill (1 mile east) and Fordingbridge Museum (0.8 miles south). For a walk, there’s Blashford Lakes.

Map of Lower Burgate © OpenStreetMap contributors

Common problems we fix in Lower Burgate

Joints that move need sealant that can stretch. A bath that flexes, a tray that rocks or a building joint that opens and closes will split a rigid or thin bead.

These are the problems we are asked about most:

  • Smears and lumps from a botched reseal
  • Beads that never stuck properly
  • Decorators’ caulk around a bath or shower
  • Black mould underneath the bead

In the older streets around St Mary's Church, older homes can move a little, which is hard on rigid grout and tired sealant.

Questions to ask before booking

  • Which sealant they’ll use, and why
  • What happens if the job turns out different
  • Whether VAT is included
  • How long to leave it before use

Choosing a sealant specialist

Work for landlords, hotels and businesses

We work for landlords and agents as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order before the next move-in.

Letting agents often deal with us directly. Tell us the address, the job and how access works and we will give you a quote.

What happens if it’s left?

A failed seal rarely means a new bathroom. When the fittings are sound, stripping and resealing the joints is often enough. If they’re not, we’ll tell you. Around Lower Burgate, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.

The cost reflects the work involved, not guesswork. That’s why we ask a few questions first and give you a clear quote before any work starts.

Why book with us

  • Anti-fungal sanitary silicone in wet areas
  • You choose the colour before work begins
  • White, clear, grey or another colour, product permitting
  • Tidy, careful work

Take a look at our cost guide or what customers say.

What we do, step by step

Good joint work is mostly preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours for most joints, depending on how much old sealant has to come out. For a village or hamlet like Lower Burgate, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. Surrounding tiles, trays and frames are protected first.
  2. The botched or failed sealant is cut away completely.
  3. We clean and degrease the joint and look for signs of movement or water.
  4. New sealant goes in once the joint is dry, and is tooled smooth.
  5. We give you the cure time and explain what caused the failure.

Preparing for the visit

  • Let us know about stairs, lifts or work at height
  • Keep children and pets away from the work area
  • Try not to wet indoor joints just before the visit

Getting a quote

Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. Whenever you are ready, ring 0345 464 0079 or send us an email.

Get a price

Advice

FAQs for Lower Burgate

Is there a guarantee on remedial sealant in Lower Burgate?

Every job comes with our 12-month guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.

Is Lower Burgate in your area for remedial sealant?

Yes, Lower Burgate is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or drop us an email and let us know what needs doing.

Do you have insurance?

Yes. Mr Mastic is fully insured, and we’ve been doing sealant work for more than 20 years.

What if the leak isn’t the sealant?

We check for that before we reseal. If we find the leak is elsewhere, we tell you before going further.

Can failed expansion joints be resealed?

Yes. If a joint has been filled with mortar or rigid filler, we rake it out where possible, and reseal with a flexible product.

Where are you based?

Our base is in Crawley, and we work across South East England, London and Scotland.

Will there be a smell?

There can be a smell while the sealant cures, but it fades. Ventilation helps.

My shower still leaks after a reseal. Can you sort it?

Yes. We’ll take all the sealant out, look for why it failed and reseal it properly.

Looking after it afterwards

A little care helps the new joints last. We recommend:

  • Keep bleach and abrasives off the bead
  • Check trays and worktops do not move
  • Run the fan after every shower
  • Keep movement joints clear of mortar and paint

Give the new sealant its full cure time: follow the cure time we give you.

Mould under a second layer of sealant keeps growing out of sight. By the time it shows through, the joint is well past saving.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job