Hampshire · England
Bathroom Resealing in Breamore
Specialist bathroom resealing for Breamore: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- New sealant laid over old sealant that is now lifting
- Damp behind the bath or under the tray
- Water getting behind the kitchen upstand
Bathroom resealing around Breamore
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For site and facilities teams at buildings such as Breamore Church of England Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Breamore is in Hampshire. Across the SP6 area, our applicators can take on bathroom resealing. 683 places in Hampshire are on our list, from the larger towns to small villages. There’s also a page for Southampton, roughly 17 miles from Breamore.
Work in SP6 is quoted and booked the same way as anywhere else. We cover properties on Salisbury Road, The Shallows and Marsh Lane. We also cover Upper Burgate (1 mile south), Woodgreen (1 mile east), Upper Street (1 mile north-west), Lower Burgate (1 mile south) and Tinkers Cross (2 miles south-west). Larger places within reach include Totton (12 miles east), Romsey (13 miles east), New Milton (15 miles south), Ringwood (8 miles south), Marchwood (15 miles east) and Ashley (15 miles south-east).
Around Breamore
Around Breamore, our work takes us to homes and buildings near Bat and Ball pub and The Burgate School and Sixth Form. A little further out are Godshill Castle Hill (1 mile south-east) and Fordingbridge Museum (2.1 miles south).
Bathroom resealing for homes and businesses in Breamore
Mr Mastic has more than 20 years’ experience of sealant work, and our applicators reseal bathrooms and kitchens across Breamore. We are fully insured ARBOMaster approved applicators, and every job carries our one-year guarantee. Typical jobs include water getting behind the bath panel and a joint torn by a bath that flexes, across basins & vanity units, wet rooms and baths.
In a village or hamlet like Breamore, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
Every job comes with a 12-month guarantee.
- Location
- Breamore (SP6)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026

DIY versus a professional finish
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Why deal with it now?
The difference in a professional reseal is mostly what you do not see: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Without that preparation, the new bead won’t last. Around Breamore, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs. Ask us for a quote and we’ll go through it with you.
What you get with us
- You choose the colour before work begins
- 20+ years of sealant experience
- A choice of colours where the product allows
- Colour picked to suit the job
See our cost guide or our reviews.
Keeping the joints in good condition
How long the joints last depends on use and care. Here’s what we suggest:
- Wipe up water along the back of the worktop
- Clean with a mild bathroom cleaner and a soft cloth
- Do not let bottles sit on the bead
- Keep an eye on the corners, where splits start
Wipe up standing water along the worktop joint and keep hot pans away from the silicone. A dry joint lasts longer.
A failed kitchen joint is easy to miss. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. Resealing before that happens protects the worktop.
Signs you need bathroom resealing in Breamore
No sealant lasts indefinitely. Daily water, heat and cleaning products take their toll over the years, so its life depends on how the room is used, cleaned and aired.
Keep an eye out for any of the following:
- Leaks into the floor or ceiling below
- New sealant laid over old sealant that is now lifting
- Sealant that has split, shrunk or peeled away
- Water escaping at the shower enclosure
If you live in an older home near St Boniface, walls and floors in older homes can move, and sealant and grout show it first.
Before you book anyone
- How the colour is chosen
- How hidden problems are handled
- How the joint is cleaned and prepared
- Whether VAT is included
How it works
There’s no need to move everything out, just the space around the work. Everything nearby is protected, and the job takes half a day or less for one room, longer when the kitchen is included in most cases. For a village or hamlet like Breamore, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
How to prepare
- Tell us about any previous sealing or DIY attempts
- Plan for the work area to be out of bounds to pets and children
- Let us know about stairs, lifts or work at height
Get a quote
Want a quote for bathroom resealing? Please call 0345 464 0079 or send us an email with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Read more
Also near Breamore
Other services in Breamore
Different surfaces, different methods
Baths
Most bath leaks begin along the long edge, particularly where there’s a shower over the bath. We finish it with a single, even bead of anti-fungal silicone.
Wet rooms
Wet rooms rely on sound joints at floor and wall junctions. They get anti-fungal sanitary silicone, and our work is on the visible joints only.
Honest limits
To be straight with you, some problems need a different trade:
- Water coming from the plumbing rather than the joint
- Cracks in the tray itself rather than the joint
- Cracked or missing grout between tiles (that’s regrouting)
If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think before you book.
Where we work in Breamore
- Kitchen worktops & upstands
- Basins & vanity units
- Sinks & splashbacks
- Wet rooms
- Shower trays & enclosures
- Baths
Questions from Breamore
Do you cover smaller places like Breamore?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is there a guarantee on bathroom resealing in Breamore?
Every job comes with our one-year guarantee, wherever it is. We are fully insured, and an ARBOMaster approved applicator.
Are you insured?
Yes. We’re fully insured.
Will it make a mess?
Tidy work is part of the job. Nearby surfaces are protected, and we clear up when we’re done.
Where do you work from?
Mr Mastic is based in Crawley. Our applicators cover Breamore, along with the rest of our area.
Do I need to be at home?
That depends on where the joints are. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.
How long does the new silicone need before I use the shower?
After around 24 hours in most cases. We will tell you the cure time for the product we used.
Do the sealants smell?
There can be a smell while the sealant cures. Ventilation helps.
