Kent · England
Bathroom Resealing in Wormshill
Bathroom resealing across Wormshill and nearby, with every bit of old sealant taken out first.
- Splits where the tray meets the wall
- A reseal done over the top of the old bead
- Black mould in the silicone that won’t clean off
Bathroom resealing in Wormshill
With over 20 years in the trade, we reseal baths, showers and kitchens in homes across Wormshill. We’re fully insured ARBOMaster approved applicators, and the work comes with a 12-month guarantee. If you have failed sealant on the screen profile and lumpy, uneven sealant from a DIY attempt, we can help, whatever the surface.
Around Wormshill, it’s houses and cottages rather than flats. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
Each job carries a 12-month guarantee, large or small.
- Where
- Wormshill (ME9)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Wormshill: your questions answered
Can you help a landlord with a rental near Harrietsham station?
Yes, we work for landlords and letting agents. You can call 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before we start.
Do you cover Wormshill for bathroom resealing?
Yes. We work across London and the South East, and Wormshill is part of that. You can ring 0345 464 0079 or send us an email and let us know what needs doing.
Can I do it myself?
That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
When can I use the bath or shower again?
Generally after around 24 hours. You’ll get the exact cure time before we leave.
Does someone need to be in?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
What colours of sealant can you use?
You’re not limited to white: clear, white and colours chosen to suit the room. We’ll talk it through when we quote.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint.
Do you do commercial work?
Yes. We work in offices, washrooms, hotels and other commercial premises, as well as homes. We can talk about working times when we quote.
Quotes for bathroom resealing in Wormshill
The quote reflects the job in front of us. We take into account:
- The product the joint needs
- Whether old sealant or filler has to be cut out
- How many rooms, windows or areas are involved
- When we can work, for business premises
Doing several joints on one visit generally makes better use of the time than several visits. We will give you a clear quote for the lot.
What to tell us for a quote
There’s no need for technical detail. Just tell us:
- The type of property
- The rough size of the job
- Photos by email, if that’s easy
- Any access issues, like height or stairs
There’s no standard price list. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or email us.
What happens if it’s left?
Sorting it now is quick: the work takes a couple of hours for a single bath or shower. Wait for a leak and you may be looking at panels off, drying out and redecorating too. Older cottages and farmhouses around Wormshill can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all play a part.
Why Wormshill clients choose us
- Arbo and Everbuild products
- 20+ years of sealant experience
- ARBOMaster approved applicator
- Neat joints and a tidy finish
Take a look at how sealant jobs are priced or our reviews.
What bathroom resealing looks like in Wormshill
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
If you live in an older home near St Giles, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Wormshill is about 4 miles south-west of Sittingbourne, in Kent. Homes, rented property, offices and hotels in Wormshill is covered for bathroom resealing, old or new, large or small. Every job comes with our 12-month guarantee. Our Kent coverage runs to 922 places, and Wormshill is one of them. We also work in Chelmsford, around 33 miles away.
Jobs for bathroom resealing in ME9 is quoted and booked the same way as anywhere else. We cover properties on The Street, Dray's Field and Bottom Pond Road. If you are just outside Wormshill, we cover Bicknor (1 mile north-west), Hucking (2 miles west), Hollingbourne (3 miles south-west), Marley (3 miles south) and Harrietsham (3 miles south). Larger places within reach include Maidstone (7 miles west), Ashford (12 miles south-east), Sittingbourne (4 miles north-east), Whitstable (15 miles east), Faversham (9 miles east) and Minster (10 miles north-east).
Landmarks near Wormshill
We work in homes and buildings around The Blacksmith's Arms Public House, among other places. The nearest railway station is Harrietsham station, roughly 2.9 miles south. A little further out are KIMS hospital (6 miles west) and Leeds Castle (3.7 miles south-west). Not far away are Detling Hill.
What we’re called out for in Wormshill
Sealant laid on a damp, dusty or greasy joint never bonds properly. Traces of soap, bath oil and old sealant stop it gripping, so a rushed job can start to lift early.
The problems people generally mention when they call include:
- Sealant that has split, shrunk or peeled away
- A reseal done over the top of the old bead
- Splits where the tray meets the wall
- Failed sealant on the screen profile
For landlords with property near Harrietsham station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
What your quote should include
- How the colour is chosen
- How the joint is cleaned and prepared
- How hidden problems are handled
- Whether all the old sealant comes out first
Keeping the joints in good condition
After the cure time, these simple habits help:
- Do not let bottles sit on the bead
- Keep scourers and sharp tools away from the bead
- Run the extractor fan during and after every shower
- Dry worktop joints after washing up
Check the sealant now and then. Small splits and lifting ends are easy to catch early, and if anything looks wrong, just call 0345 464 0079 or email us.
A few black dots in the silicone soon become a black line. When it has grown right through, it rarely cleans out, and nearby grout often goes the same way. Replacing the sealant early keeps the job small.
Should I try it myself first?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
How it works
We work through the job in order: protect, prepare, seal, tidy. Typically it takes two to three hours for a typical bath, depending on how much old sealant there is, and the area is left clean. Somewhere like Wormshill needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First the area is protected and every bit of old sealant removed.
- The joint is cleaned, degreased and treated for mould.
- The joint is left to dry, and baths are filled with water first.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- Finally we tidy up and explain the cure time before we leave.
Before we arrive
- Tell us if parking is tricky
- Mention any tricky access
- Move anything stored near the joints
Get a quote
For a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. We’ll give you a clear quote before any work starts.
Advice
Also near Wormshill
More services for Wormshill
What the job involves on each surface
Sinks & splashbacks
The edge of an inset sink is a common place for water to get under the worktop. Where the sealant around the visible edge has failed, we renew it.
Basins & vanity units
A vanity top has a joint along the wall and sometimes at the sides. Water that gets behind can damage the unit, so the joint is sealed in one unbroken line.