Kent · England
Bathroom & kitchen resealing in Marley, Kent
Our applicators work in Marley on bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Water getting behind the kitchen upstand
- Black mould in the silicone that will not clean off
- Cracked, shrunken or lifting silicone
How we handle bathroom resealing in Marley
A bead that has gone black, split or come away shouldn’t be left until there’s a leak. A photo of the joints helps when you call 0345 464 0079 or drop us an email, and we will give you a clear quote before any work starts. We work on basins & vanity units, wet rooms and kitchen worktops & upstands, and people most often call us about a bead that has pulled away from the tiles and leaks into the floor or ceiling below.
Somewhere as small as Marley, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
You get a one-year guarantee, the same in Marley as everywhere else we work.
- Where
- Marley (ME17)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
What affects the quote in Marley
For a quick quote, just ask. The main things that affect it are:
- Any working-time requirements on site
- Which sealant suits the joint
- The number of rooms or windows
- The size of the job
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Asking for a quote
To make quoting easier, please include:
- Whether it has been sealed before
- Photos by email, if that’s easy
- Where the job is, and your postcode
- What the problem is, such as mould, gaps, leaks or cracking
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work before giving you a price.
Bathroom resealing around Marley
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For an older house near a landmark such as St John the Baptist's Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. For site and facilities teams at buildings such as Harrietsham Church of England Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes. Letting a property close to Harrietsham station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Marley is about 7 miles east of Maidstone, in Kent. Anywhere in ME17, our applicators can take on bathroom resealing. Marley is one of 922 towns and villages in Kent we cover. Our Chelmsford page covers work nearby (35 miles or so).
Every address in ME17 is within our area for bathroom resealing. We cover properties on Parks Road, Young Lane and Church Lane. If you’re just outside Marley, we cover Harrietsham (1 mile west), Pollhill (1 mile west), Sandway (1 mile south-east), Platt's Heath (1 mile south) and Chegworth (2 miles west). We also work in nearby towns such as Maidstone (7 miles west), Ashford (11 miles south-east), Sittingbourne (7 miles north), Faversham (10 miles north-east), Minster (13 miles north-east) and Kings Hill (12 miles west).
Around Marley
In Marley, that means homes and buildings near The Lenham School, The Roebuck Public House and Kiln Wood. For rail, the closest station is Harrietsham station, roughly 0.6 miles west of the centre. Other landmarks nearby include Leeds Castle (2.5 miles west) and The Dog Collar Museum (2.4 miles west).
How to look after the new joints
Simple care keeps the joints in good condition. We recommend:
- Run the extractor fan during and after every shower
- Clean with a mild bathroom cleaner and a soft cloth
- Keep bottles off the sealant line
- Never pick at the silicone with a blade
Don’t stand bottles along the bead, as they hold water against it. Squeegeeing the walls and tray after use keeps water from sitting on the joint.
A split bead lets water through every time the bath or shower is used. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Resealing early stops it.
What sealant work can’t fix
A few problems are outside what sealant work can do:
- A bath or tray that moves because it isn’t properly supported
- A tray or bath that’s cracked through
- Tiles that have come away from the wall
If in doubt, ring 0345 464 0079 or email us and we’ll say what we think.
Surfaces we seal
- Basins & vanity units
- Baths
- Shower trays & enclosures
- Wet rooms
- Sinks & splashbacks
- Kitchen worktops & upstands
Why it’s worth doing now in Marley
A quick bead over the top of the old one might look better for a while, but it can’t stick to what’s underneath. It lifts, traps water and grows mould behind it, and the next reseal means two layers to cut out. In a small place like Marley, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote and we will talk you through it.
Why us?
- Quality sealants from Arbo and Everbuild
- 20+ years of sealant experience
- Full insurance on every job
- We never seal over old sealant
What we do, step by step
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The work itself takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen from start to finish. Somewhere like Marley needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- We clean and degrease the joint and treat any mould.
- Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We tidy up and give you the cure time, usually around 24 hours.
How to prepare
- Tell us about any previous sealing or DIY attempts
- Clear the area around the work
- Try not to wet indoor joints just before the visit
Getting a quote
Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job, and we’ll take it from there.
Read more
FAQs for Marley
Is Marley in your area for bathroom resealing?
Yes, Marley is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or email us with a few details of the job.
Do you work for landlords with property near Harrietsham station?
Yes, landlords and agents are among the people we work for. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll give you a clear quote.
Is the work guaranteed?
Yes. Every job carries our 12-month guarantee.
Can mouldy silicone be sorted out?
Yes. Mould inside the bead rarely cleans out for good, so the bead comes out, the joint is treated and new anti-fungal silicone goes in.
Where are you based?
Our base is in Crawley, and we work across South East England, London and Scotland.
Do I have to be there?
We need access to the joints, so we will agree that with you when we book. Indoors, that normally means someone at home.
Can you reseal around my kitchen sink and worktop?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then a colour-matched bead is laid.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Also in Marley
Work for landlords, hotels and businesses
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
We also work for property managers and facilities teams in Marley and across Kent. Several sites can be quoted together, and we’re fully insured.
What the job involves on each surface
Kitchen worktops & upstands
The joint between worktop and wall takes splashes, crumbs and cleaning sprays. The new bead is colour-matched where it shows, so the line doesn’t stand out.
Basins & vanity units
Basin joints are short and close to eye level: so we keep the line tidy and even, finished in a colour that suits the basin.